1
edit
Changes
→Project News
<!-- This is where a permanent record of your releases and updates will go. In these you should discuss the status or your work, your interactions with other members of the community (e.g., Seneca and Mozilla), problems you have encountered, etc. -->
'''Hello everybody,
I released version 0.1 of my SBR600 project. It is roughly close to what I expected. After several problems in booting system up, I could figure out how to boot the Fedora ARM system. The next step that I am working on that is "dracut". I am looking for a way to create an initial ramdisk image for preloading modules. This can be done by dracut command. After this step, it is the final step which is packaging(I hope).Now, let's see some of my testing result and my explanations on those test.
'''This shows my successful boot on Fedora-ARM:''''''
: VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
: Console: switching to colour frame buffer device 80x30
: clock: clksel_round_rate_div: dpll4_m4_ck target_rate 48000000
: clock: new_div = 9, new_rate = 48000000
: twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
: Waiting 1sec before mounting root device...
: mmc0: new high speed SDHC card at address 0007
: mmcblk0: mmc0:0007 SD08G 7.48 GiB
: mmcblk0: p1 p2
: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
: VFS: Mounted root (ext2 filesystem).
: Freeing init memory: 168K
: Welcome to Fedora
: Press 'I' to enter interactive startup.
: Starting udev: udevd-work[652]: error opening ATTR{/sys/class/sound/controlC0/../uevent} for writing: No such file or directory
: [ OK ]
: Setting hostname fedora-arm: [ OK ]
: Checking filesystems
: Checking all file systems.
: [/sbin/fsck.ext2 (1) -- /] fsck.ext2 -a /dev/mmcblk0p2
: /dev/mmcblk0p2 is mounted.
: WARNING!!! Running e2fsck on a mounted filesystem may cause
: SEVERE filesystem damage.
: Do you really want to continue (y/n)? no
: check aborted.
: [ OK ]
: Mounting local filesystems: [ OK ]
: Enabling /etc/fstab swaps: [ OK ]
: Entering non-interactive startup
: FATAL: Module ipv6 not found.
: Bringing up loopback interface: [ OK ]
: Bringing up interface eth0: RTNETLINK answers: File exists
: [ OK ]
: FATAL: Module ipv6 not found.
: Starting system logger: [ OK ]
: Mounting other filesystems: [ OK ]
: Retrigger failed udev events[ OK ]
: Starting sshd: [ OK ]
: Fedora release 12 (Constantine)
: Kernel 2.6.28-omap1 on an armv7l (console)
: fedora-arm login: root
: Password:
: Last login: Fri Dec 31 19:32:49 on console
'''This one shows my network configuration and successful connection to getway and Internet:'''
: [root@fedora-arm ~]# ifconfig
: lo Link encap:Local Loopback
: inet addr:127.0.0.1 Mask:255.0.0.0
: UP LOOPBACK RUNNING MTU:16436 Metric:1
: RX packets:2 errors:0 dropped:0 overruns:0 frame:0
: TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
: collisions:0 txqueuelen:0
: RX bytes:168 (168.0 b) TX bytes:168 (168.0 b)
: usb0 Link encap:Ethernet HWaddr 1E:11:18:90:28:EF
: inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0
: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
: RX packets:6 errors:0 dropped:0 overruns:0 frame:0
: TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
: collisions:0 txqueuelen:1000
: RX bytes:1444 (1.4 KiB) TX bytes:504 (504.0 b)
: [root@fedora-arm ~]# route -n
: Kernel IP routing table
: Destination Gateway Genmask Flags Metric Ref Use Iface
: 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 usb0
: 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 usb0
: 0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0 usb0
: [root@fedora-arm ~]# ping 10.0.0.1
: PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
: 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=8.14 ms
: 64 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=1.49 ms
: 64 bytes from 10.0.0.1: icmp_seq=3 ttl=64 time=1.55 ms
'''And ping google.ca:'''
: [root@fedora-arm ~]# ping 74.125.225.16
: PING 74.125.225.16 (74.125.225.16) 56(84) bytes of data.
: 64 bytes from 74.125.225.16: icmp_seq=2 ttl=55 time=849 ms
: 64 bytes from 74.125.225.16: icmp_seq=3 ttl=55 time=26.9 ms
: 64 bytes from 74.125.225.16: icmp_seq=4 ttl=55 time=28.3 ms
'''Then I tried to update my Fedora-Arm system. It was successful too:'''
: root@fedora-arm ~]# yum update
: fedora | 3.4 kB 00:00
: fedora/primary_db | 7.5 MB 06:46
: updates | 951 B 00:00
: updates/primary | 204 B 00:00
: Setting up Update Process
: Resolving Dependencies
: --> Running transaction check
: ---> Package cpp.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
: ---> Package gcc.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
: ---> Package libgcc.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
: ---> Package libgomp.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
: ---> Package libstdc++.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
: --> Finished Dependency Resolution
: Dependencies Resolved
: ================================================================================
: Package Arch Version Repository Size
: ================================================================================
: Updating:
: cpp armv5tel 4.4.2-5.fc12.fa4 fedora 3.1 M
: gcc armv5tel 4.4.2-5.fc12.fa4 fedora 6.1 M
: libgcc armv5tel 4.4.2-5.fc12.fa4 fedora 248 k
: libgomp armv5tel 4.4.2-5.fc12.fa4 fedora 89 k
: libstdc++ armv5tel 4.4.2-5.fc12.fa4 fedora 234 k
: Transaction Summary
: ================================================================================
: Install 0 Package(s)
: Upgrade 5 Package(s)
: Total download size: 9.8 M
: Is this ok [y/N]: y
: Downloading Packages:
: (1/5): cpp-4.4.2-5.fc12.fa4.armv5tel.rpm | 3.1 MB 03:58
: (2/5): gcc-4.4.2-5.fc12.fa4.armv5tel.rpm | 6.1 MB 03:21
: (3/5): libgcc-4.4.2-5.fc12.fa4.armv5tel.rpm | 248 kB 00:20
: (4/5): libgomp-4.4.2-5.fc12.fa4.armv5tel.rpm | 89 kB 00:01
: (5/5): libstdc++-4.4.2-5.fc12.fa4.armv5tel.rpm | 234 kB 00:43
: --------------------------------------------------------------------------------
: Total 20 kB/s | 9.8 MB 08:31
: warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 35805f14
: fedora/gpgkey | 2.7 kB 00:00 ...
: Importing GPG key 0x35805F14 "Fedora 12 ARM (Signing key for F-12 ARM) <fedora-arm@redhat.com>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-armv5tel
: Is this ok [y/N]: y
: Running rpm_check_debug
: Running Transaction Test
: Finished Transaction Test
: Transaction Test Succeeded
: Running Transaction
: Updating : libgcc-4.4.2-5.fc12.fa4.armv5tel 1/10
: Updating : libgomp-4.4.2-5.fc12.fa4.armv5tel 2/10
: Updating : libstdc++-4.4.2-5.fc12.fa4.armv5tel 3/10
: Updating : cpp-4.4.2-5.fc12.fa4.armv [################ ] 4/10
: Updating : gcc-4.4.2-5.fc12.fa4.armv5tel 5/10
: Cleanup : libstdc++-4.4.2-5.fc12.fa3.armv5tel 6/10
: Cleanup : libgcc-4.4.2-5.fc12.fa3.armv5tel 7/10
: Cleanup : cpp-4.4.2-5.fc12.fa3.armv5tel 8/10
: Cleanup : libgomp-4.4.2-5.fc12.fa3.armv5tel 9/10
: Cleanup : gcc-4.4.2-5.fc12.fa3.armv5tel 10/10
: Updated:
: cpp.armv5tel 0:4.4.2-5.fc12.fa4 gcc.armv5tel 0:4.4.2-5.fc12.fa4
: libgcc.armv5tel 0:4.4.2-5.fc12.fa4 libgomp.armv5tel 0:4.4.2-5.fc12.fa4
: libstdc++.armv5tel
'''And finally, I used git for dracut since I couldn't install through yum command:'''
: racut@fedora-arm ~]# git clone git://dracut.git.sourceforge.net/gitroot/dracut/d
: Initialized empty Git repository in /root/dracut/.git/
: remote: Counting objects: 9670, done.
: remote: Compressing objects: 100% (6208/6208), done.
: remote: Total 9670 (delta 6805), reused 4965 (delta 3351)
: Receiving objects: 100% (9670/9670), 1.23 MiB | 8 KiB/s, done.
: Resolving deltas: 11% (754/6805)[root@fedora-arm ~]#
: [root@fedora-arm ~]# ls
: dracut
: [root@fedora-arm ~]# cd dracut/
: [root@fedora-arm dracut]# ls
: AUTHORS debian dracut.conf.d
: COPYING dracut dracut.kernel.7.xml
: HACKING dracut-catimages dracut.png
: Makefile dracut-catimages.8.xml dracut.spec
: NEWS dracut-functions dracut.svg
: PKGBUILD dracut-gencmdline dracut.xml
: README dracut-gencmdline.8.xml lsinitrd
: README.generic dracut-update-initramfs mkinitrd-dracut.sh
: README.kernel dracut.8.x
