1,885
edits
Changes
no edit summary
!Machine name!!IP||Type!!Role!!Add-ons!!OS||Status!!Notes
|-
|arm1||192.168.1.1||openrd-client||koji builder||8 GB SD, 650GB 2.5" disk||F12|| ||
|-
|arm2||192.168.1.2||shevaplug||koji builder||8 GB SD||F12|| ||
|-
|arm3||192.168.1.3||guruplug-server||koji builder|| 8GB microSD||F12|| ||
|-
|arm4||192.168.1.4||guruplug-server||koji builder|| 8GB microSD||F12|| ||
|-
|arm5||192.168.1.5||guruplug-server||koji builder|| 8GB microSD||F12|| ||
|-
|arm6||192.168.1.6||guruplug-server||koji builder|| 8GB microSD||F12|| ||
|-
|cdot-guru-2-1||192.168.1.121||guruplug-server||prototype for new koji-builder image|| 8GB microSD||F12||Testing|||-|bb1||10.0.0.1||beagleboard rev. C4||test target||8GB SD||F12||Testing||
|}
At present, all of the ARM hardware except is connected to a private GigE network connected to the [[CDOT Development Systems|CDOT system]] named [http://hongkong.proximity.on.ca/ HongKong] (which provides a NAT gateway). Each machine has an /etc/hosts entry on HongKong. The BeagleBoard is connected via a USB "gadget" device (ethernet emulation); the other systems are connected via Ethernet (GigE except for the GuruPlugs).
Machine types:
|sheevaplug||Marvell 88F6281||512M||512M||MicroSD||GigE||none||USB||USB||Debian-based||SW-controlled LED||[[Fedora ARM_Secondary Architecture/SheevaPlug|SheevaPlug]]
|-
|guruplug-server||Marvell 88F6281||512M||512M||MicroSD||GigE x 2(use at 100Mbps or lower unless fan installed)||802.11bg, Bluetooth||eSATA, USB||external JTAG adapter (USB)||???||-||Product detail: [http://www.globalscaletechnologies.com/t-guruplugdetails.aspx GuruPlug]|-|beagleboard rev. c4||TI OMAP 3530||512M||512M||SD||USB OTG Gadget ethernet emulator||-||SD, USB||serial port console via 10-pin header||none||no case||http://beagleboard.org
|}
