Changes

Jump to: navigation, search

OPS235 Lab 2 - CentOS7 - SSD

36,542 bytes removed, 13:04, 15 September 2016
Redirected page to OPS235
[[Category:OPS235]]  = LAB PREPARATION =[[Image:vmware-1.png|thumb|right|300px|At the end of lab2, your VMware Workstation application will contain '''4 virtual machines''' ('''c7host''' in your '''VMware Workstation''' application, and '''centos1, centos2, centos3 VMs''' in your '''KVM''' application). You will now have the option to run one virtual machine at a time, or run all machines simultaneously to learn about networking (covered in later labs) ]] === Purpose / Objectives of Lab2=== '''In this lab, you will create another three virtual machines''' to learn how to install Centos Linux in different ways including network installs.<br><br><u>Main Objectives</u> * '''Installing Virtualization Software''' on your '''c7host''' machine* '''Create 3 separate VMs (virtual machines) using different installation methods:''':* Centos Live DVD (with Install to Harddisk program):* Network Centos Installation without configuration file:* Network Centos Installation with configuration file (Kickstart)* Understand the '''advantages and disadvantages of each type of installation''', and be able to '''select the best installation method''' for a particular situation.* '''Manipulate virtual machines by CLI''' (virsh)* '''Properly backup VMs and VM configuration''' in virtual manager application onto home directory and to external source (USB Key) * Create and run '''Bash Shell scripts''' to automatically create a post-install report for an installed VM.  {|width="100%" cellspacing="0" |- valign="top" |colspan="3" style="font-size:16px;font-weight:bold;border-bottom: thin solid black;border-spacing:0px;padding-left:20px;"|Minimum Required Materials<br> |colspan="3" style="font-size:16px;font-weight:bold;border-bottom: thin solid black;border-spacing:0px;padding-left:20px;"|Linux Command Reference<br>|- valign="top" | |[[Image:ssd.png|thumb|left|85px|<b>Solid State Drive</b>]] | |[[Image:ubs-key.png|thumb|left|85px|<b>USB key</b><br>(for backups)]] | |[[Image:log-book.png|thumb|left|70px|<b>Lab2 Log Book</b>]] | valign="top" style="padding-left:20px;"|Virtualization<br>[http://linux.die.net/man/1/virt-manager virt-manager]<br>[http://linux.die.net/man/1/virsh virsh]<br>Installation Guides<br>[http://wiki.centos.org/HowTos/KVM Installing &amp; Using KVM on CentOS ]<br>[http://www.dedoimedo.com/computers/kvm-intro.html Using KVM (tutorial)]<br>[https://www.centos.org/docs/5/html/5.2/Virtualization/sect-Virtualization-Commands_for_Red_Hat_Virtualization-virsh_the_command_line_interface_tool_for_virtualization.html virsh command reference ]<br>|valign="top" style="padding-left:20px;"|Miscellaneous<br>[http://unixhelp.ed.ac.uk/CGI/man-cgi?gzip gzip, gunzip]<br>[http://unixhelp.ed.ac.uk/CGI/man-cgi?grep grep]<br>[http://man7.org/linux/man-pages/man1/wc.1.html wc]<br>[http://man7.org/linux/man-pages/man1/pwd.1.html pwd]<br>[http://man7.org/linux/man-pages/man1/ls.1.html ls]<br>[http://man7.org/linux/man-pages/man1/more.1.html more]<br>[http://man7.org/linux/man-pages/man1/file.1.html file]<br>[http://man7.org/linux/man-pages/man1/wget.1.html wget]<br>[http://man7.org/linux/man-pages/man1/chmod.1.html chmod]<br>[http://ss64.com/vi.html vi]|valign="top" style="padding-left:20px;"|Matrix Online Tutorials:<br><ul><li>Shell Scripting - Part 2 (Logic & Math Expressions):<br>'''/home/murray.saul/scripting-2'''</li><li>Shell Scripting - Part 3 (Loops)<br>'''/home/murray.saul/scripting-3'''</li></ul> |} =INVESTIGATION 1: USING VIRTUALIZATION SOFTWARE TO CREATE VIRTUAL MACHINES= ===Part 1: Virtualization Application Setup / Comparison Chart=== [[Image:lab2-logbook.png|thumb|right|200px|'''comparison chart''' in lab2 logbook.]] '''Record VM Installation in Lab2 (Installation Comparison Chart):''' You will be learning to perform several different type of CENTOS Linux installs. Lab2 already has an empty table for comparing various Linux installs. You were required in lab1 to record your observation for your '''c7host''' installation. As you proceed throughout this lab, you will be required to fill in the comparison chart for three of the VMs (virtual machines) that you will be installing.  '''Complete the following steps to install and run the virtual manager application:'''  # Launch the '''VMware Workstation''' application.# Select '''Open Virtual Machine''', and select the VM called '''c7host''' on your Solid State Drive.# Launch your '''c7host''' machine, and login as as a regular user.# Open a shell terminal.<br><br>'''WARNING:''' You must perform a '''yum update''' on your '''c7host''' machine before proceeding with the next steps. You issue the following command to update your software for this machine:<br><b><code><span style="color:#3366CC;font-size:1.2em;">yum update</span></code></b><br><br># You will need to download an image file for the Centos7 LIVE DVD by issuing the following command (best works while at Seneca):<br><b><code><span style="color:#3366CC;font-size:1.2em;">wget http://belmont.senecac.on.ca/centos/7/isos/x86_64/CentOS-7-x86_64-LiveGNOME-1511.iso</span></code></b><br><br># Install the virtualization software by issuing the command:<br><b><code><span style="color:#3366CC;font-size:1.2em;">yum install qemu-kvm qemu-img virt-manager libvirt libvirt-python \<br>python-virtinst libvirt-client virt-install virt-viewer bridge-utils</span></code></b> <br><br> {{Admon/important|Restart your Host Machine|You must restart your '''c7host''' machine after installing the virtualization program above. If you fail to do this, you may experience virtualization network problems!}}  ::This will install many applications (including)::::* '''kvm/qemu''' - the hypervisor and other hardware emulation systems.:::* A system service named '''libvirtd''' that manages the VMs.:::* A graphical tool for managing virtual machines ('''virt-manager''') and the '''virsh''' command-line tool.<br><br><ol> <li value="7">Start the virtualization service: <b><code><span style="color:#3366CC;font-size:1.2em;">systemctl start libvirtd</span></code></b><br><br></li></ol>:'''NOTE:''' The most recent variants of Centos and Fedora are using a service called '''firewalld''' that is intended to replace '''iptables''', however the ''iptables'' service is still in relatively common usage. In this course we will concentrate on ''iptables''.<br><br><ol><li value="8">To Disable firewalld issue the following commands:<br><b><code><span style="color:#3366CC;font-size:1.2em;">systemctl disable firewalld</span></code></b><br><b><code><span style="color:#3366CC;font-size:1.2em;">systemctl stop firewalld</span></code></b><br><br></li><li>To install and enable the IPTables services, issue the following commands:<br><b><code><span style="color:#3366CC;font-size:1.2em;">yum install iptables-services</span></code></b><br><b><code><span style="color:#3366CC;font-size:1.2em;">systemctl enable iptables</span></code></b><br><b><code><span style="color:#3366CC;font-size:1.2em;">systemctl start iptables</span></code></b><br><br></li></ol>{| width="40%" align="right" cellpadding="10"|- valign="top"|colspan="2"|{{Admon/important|Run virt-manager as a regular user, not as root|Otherwise all your virtual machines will be owned by root and you won't be able to use them as a regular user.}} |}<ol> <li value="10">Start the graphical tool by selecting the menu options '''Applications'''>'''System Tools'''>'''Virtual Machine Manager''' or by typing the command<b><code><span style="color:#3366CC;font-size:1.2em;"> virt-manager</span></code></b><br><br></li><li>You will be learning to perform several different type of CENTOS Linux installs. Lab2 has a '''comparison chart''' for comparing various Linux installs. You were required in lab1 to record your observation for your '''centos1''' installation.<br><br></li><li>As you proceed throughout this lab, you will be required to fill in the comparison chart for the remaining 3 virtual machines that you will be installing.</li></ol>  === Part 2: Installing from a Downloaded Image (Centos7 LIVE CD) ==={| width="40%" align="right" cellpadding="10"|- valign="top"|{{Admon/tip|Perform Downloads and Network installs at Seneca|'''It is recommended to perform this lab in one of Seneca College's labs'''. This lab uses servers which are on the Seneca network and which are not available from other locations (such as your home). If you attempt this lab from another location, adjust the belmont.senecac.on.ca URLs to point to another mirror server -- note that you may need to change the directory name as well as the server name. The installation of the '''centos3''' virtual machine <u>must</u> be done at Seneca.}}|-|{{Admon/important|Removing and Recreating VMs|If for some reason the user wants to remove a Virtual Machine, they can right-click the VM, and select delete in the Virtual Machine Manager. It is recommended to '''"delete the image file" in the remove VM dialog box when removing and then recreating a VM'''. Note: If you fail to properly remove the VM image file, it may affect the hard disk size for the new VM (i.e. use the old smaller size. Make certain to remove that VM image file prior to recreating the VM.|'''}}|}:'''VM Details:''' :: '''VM Name (and hostname):''' centos1:: '''Boot media:''' LIVE CD Image:: '''Installation source:''' Downloaded Centos7 LIVE CD image (http://belmont.senecac.on.ca/centos/7/isos/x86_64/CentOS-7-x86_64-LiveGNOME-1511.iso):: '''VM Image Pathname:''' /var/lib/libvirt/images/centos1.qcow2:: '''Memory:''' 2GB:: '''Disk space:''' 10GB:: '''File System (root partition):''' ext4:: '''CPUs:''' 1 # Make certain you used the wget command to download the LiveGNOME iso file from the Belmont server (from previous instructions).# In the Virtual Machine Manger, click on the icon to ''Create a Virtual Machine'' in the upper-left corner: # A window will appear with the title ''New VM''. There are five steps to be completed; click Forward after each step:# '''Step 1 of 5:'''Select '''Local install media''' and click '''Forward'''.# '''Step 2 of 5:''' Select '''Use ISO Image''', click the '''Browse''' button, and then the '''Browse Local''' button. Navigate to the location of the downloaded Centos7 LIVE CD image, select the image file and click '''Open'''. When finished, click Forward to proceed.# '''Step 3 of 5:''' Set the memory to '''2048 MB''' and the number of CPUs to '''1'''[[Image:vm-path.png|thumb|right|300px|It is extremely important to '''correctly specify the VM image file path-name'''. Double-check the spelling of the path-name before proceeding!]]<ol><li value="7">'''Step 4 of 5:''' This next step creates a disk file that will be used to simulate the virtual machine's disk drive. Select a size of '''10 GB''' and then click '''Forward''' to proceed.</li><li>'''Step 5 of 5:''' Enter the virtual machine name: '''centos1'''. Review the VM information, and click '''Finish'''.<br><br></li><li>'''The virtual machine will now start''' - start timing your installation and making notes for '''centos1''' virtual machine in the installation comparison chart in lab2 logbook. The virtual machine is running from the live disc at this point, and no software has been installed on the ''hard drive'' of the virtual machine. The point of a live disk is to allow you to test the distribution to see whether you like it without installing to the hard-drive first.</li><li>Double-click '''Install to Hard Drive'''. The installation program, similar to the one used when installing CentOS in Lab 1, will appear. You basically perform the same installation operations for this VM including for '''Date & Time''', '''Network & Hostname''', and '''Installation Destination'''. Make certain to use the '''hostname''': '''<u>centos1</u>''' as opposed to ''c7host'') for this installation. (with a few slight differences).</li><li>For '''Installation Destination''', select the destination option: '''I will configure partitioning''' and then click '''Done'''. Make certain that the '''Partition Scheme''' is set to '''LVM''' and then click on the link: '''Click to Create Automatically'''. '''Done'''. Check to make certain that the root partition has file system type: '''ext4'''.</li><li>Accept the changes and then click '''Begin Installation'''.<ol type="a"><li>You will be required to make selections very similar to what you did in lab1.</li><li>While the system is installing, take a few minutes to record your observations (including slight differences with centos1 install as opposed to c7host install).</li><li>When the installation process is complete, note the time required to install this system and record in the installation comparison chart of your lab2 logbook.<br><br></li></ol></li><li>Power-off your Centos7 LIVE system.</li><li>You should notice that the Centos7 boot menu appears. Either press '''ENTER''' to start or wait for it to start automatically.</li><li>Finish the final steps in the setup process (like you did in lab1).</li><li>#You may want to turn off the screen-saver (like you did in Lab1): [http://zenit.senecac.on.ca/wiki/index.php/OPS235_Lab_1_-_CentOS7#Customizing_Your_Account How to Turn-off Screen Saver (lab1)]</li></ol>{| width="40%" align="right" cellpadding="10"|- valign="top"|colspan="2"|{{Admon/important|Network / Service Considerations|Please perform the tasks below in order allow these CentOS systems to be able to communicate with each other. '''Failure to properly perform these operations can cause problems in future labs'''.|}}|}<ol> <li value="13">Enable SSH access to your virtual machine with these commands (semi-colon allows commands to be run in sequence):<br /> <b><code><span style="color:#3366CC;font-size:1.2em;">service sshd start; chkconfig sshd on</span></code></b></li> <li>Find out the IP address of your virtual machine and the name of your Ethernet network adaptor: <b><code><span style="color:#3366CC;font-size:1.2em;">ifconfig</span></code></b> </li> <li>Enter the following command on your virtual machine to create a firewall exception to allow ssh traffic into the machine:<br /> <b><code><span style="color:#3366CC;font-size:1.2em;">iptables -I INPUT -p tcp -s0/0 -d0/0 --dport 22 -j ACCEPT</span></code></b></li><li>If you are logged in as root, logout to your regular user account.</li><li>Confirm that you can ssh to your virtual machine from the host (your main CentOS installation): <b><code><span style="color:#3366CC;font-size:1.2em;">ssh regularuserid@IPaddress</span></code></b> (where '''regularuserid''' is your regular user login id, and '''IPaddress''' is the '''IP_ADDRESS''' of your '''centos1''' VM!).</li><li>Make certain to '''disable SELinux for centos1''' (refer to lab1)</li><li>Adjust your screen-saver settings and run a '''yum update''' on your centos1 VM before proceeding to ''Part 2''</li></ol>  === Part 3: Installing from a Network === :'''VM Details:''' :: '''VM Name (and hostname):''' centos2:: '''Boot media:''' Network installation:: '''Installation source URL:''' http://belmont.senecac.on.ca/centos/7/os/x86_64/:: '''VM Image Pathname:''' /var/lib/libvirt/images/centos2.qcow2:: '''Memory:''' 2048MB:: '''Disk space:''' 20GB:: '''CPUs:''' 1 # Create the VM (called '''centos2''') as you did with the ''centos1'' machine, except for the following differences:<br><br><ol type="a"><li>Select '''Network Installation''' using the installation source URL displayed above.</li><li>When customizing your partitions, do the same operation that you did in centos2, but after automatically creating the partitions, reduce the size of the root LVM partition to '''8000 MB''' and add an LVM partition with a size of '''2000 MB''' (mount point: '''/home''', name: '''home''', and make certain root and /home partitions have '''ext4''' file system).</li><li>Don't forget to install the GNOME desktop here as you will need a GUI for Centos2<br><br></li></ol># Complete the installation. Login to your regular user account, and perform a yum update for the centos2 VM (reboot if required). Make certain to adjust your screen-saver settings if desired.# Repeat the steps as you did to '''start the SSH service''', '''set iptables to accept connections via ssh''', '''test connections between centos2 and centos1''', and '''disable SELinux''' (refer to lab1).# Record the time taken to install, and compare this to the time taken by the previous installations. Record your findings in the Installation Comparison chart in lab2 logbook.  === Part 4: Installing from a Network using a Kickstart File === :'''VM Details:''' :: '''VM Name (and hostname):''' centos3:: '''Boot media:''' Network installation:: '''Installation source URL:''' http://belmont.senecac.on.ca/centos/7/os/x86_64/:: '''Kickstart File URL:''' http://matrix.senecac.on.ca/~andrew.smith/ops235/centos7-kickstart-v01.cfg:: '''VM Image Pathname:''' /var/lib/libvirt/images/centos3.qcow2:: '''Memory:''' 2048MB:: '''Disk space:''' 15GB:: '''CPUs:''' 1 # Create the VM as you did with the ''centos2'' virtual machine, specifying a network install as before, but specify the kickstart location under the "options section" for network install. What do you think is the purpose of this kickstart file?# Observe the installation. How is it different from booting from a downloaded image?# Complete the installation. Record the time taken to install, and compare this to the time taken by the previous installations.<br><br>If the during the installation, you see the message at the bottom '''Pane is Dead''', click the '''Virtual Machine''' menu at the top, select '''Shut Down''' -> '''Force Off''', '''right-click''' on '''centos3''' in the ''virtual manager'' window and select '''Delete'''. Redo the VM setup for a new instance of the ''centos3'' VM.# What happens when the installation is finished?# Take a look at the kickstart file (eg. view url in a webj-browser) to determine the root password as well as the name and password for the first user account!# Boot the virtual machine and log in (use the user ID and password information from the previous step). Compare the experience to the first time you booted the other virtual machines. Record this information in the '''table contained in Investigation 4'''.# Repeat the steps as you did to '''start the SSH service''', '''set iptables to accept connections via ssh''', '''test connections between centos3 and centos1''', and '''disable SELinux''' (refer to lab1).# Remember that centos3 is text-based interface only (no graphics). To recover from a blank screen, press a key (like the SPACE key) to return to the screen display.# Record the time taken to install, and compare this to the time taken by the previous installations. Record your findings in the Installation Comparison chart in lab2 logbook.  '''Answer the Investigation 1 observations / questions in your lab log book.'''  =INVESTIGATION 2: COMMON POST-INSTALL TASKS= ===Part 1: Perform Software Updates==={|width="40%" align="right" cellpadding="10"|- valign="top"|{{Admon/caution|Allow Time to Perform Yum Updates|Allow sufficient time in order to perform updates prior to the end of the lab. Since you will be updating ALL of your VMs, allow 15-20 "lead-time" to start your updates and to backup your VMs prior to the end of the lab. '''NEVER force a shut-down of your VM while updates are running, since this will ruin your VM''', and you will have to restore from a backup, or redo your labs for that VM!}}|} It is important as a Linux System Administrator to update software on your Linux system periodically. Performing periodic updates will fix software bugs and inefficiencies as well as apply security patches in order to better secure your Linux server. '''You are required to perform the following command for ALL of your 4 VMs:''' <b><code><span style="color:#3366CC;font-size:1.2em;">yum update</span></code></b>  This will download and install all of the packages that have been updated since the installation DVD image was created. If you complete this command at Seneca, it should run quite fast as Seneca College hosts a CentOS Repository mirror (a copy of all of the current CentOS packages, on a local web server). You will be reminded at the end of each of the remaining labs to perform software updates on ALL of your VMs.  === Part 2: Backing Up Virtual Machines ==={| width="40%" align="right" cellpadding="10"|- valign="top"|colspan="2"|{{Admon/important|Backing up VMs|There are two general processes in order to back up your images:<ol><li>'''Compressing your images''' (also recommended to backup up to external storage USB Key) using the '''gzip''' command.</li><li>'''Backup the VM xml configuration file''' (preferably to USB key) using '''virsh''' shell command to add VM to virtual machine manager list (in the event that the HOST machine is "wiped" and re-installed, but VM images and xml configuration files have been backed up external storage).</li></ol><br />Taking the time to backup the image of the Operating System's file system allows the user to return to a '''"restoration point"''' using the '''gunzip''' command in case something bad occurs to the OS during a lab.<br />Failure to take the time to make and confirm backups can result in loss of lab work for the student!|}}|}# Shut down all of the virtual machines.# Change to the directory <b><code>/var/lib/libvirt/images/</code></b>. Note the size of the files in this directory. What do these files contain?# Make a compressed backup of the '''centos3.qcow2''' file to your home directory with this command:<br><b><code><span style="color:#3366CC;font-size:1.2em;">gzip < centos3.qcow2 > ~YourUserId/centos3.qcow2.backup.gz</span></code></b><br />(Note: Make certain to use the redirection signs "<" and ">" properly in the command!)# Compare the size of the compressed and original files (hint: use '''ls -lh'''). If file is very large (like 15GB), you didn't compress it and you need to remove that file and perform the previous step until you get it right!# Start the '''''centos3''''' VM.# '''Make certain that you are in your VM and <u>not</u> in your main system!''' # Wreck <u>only</u> your centos3 system! Try this command inside the centos3 virtual machine:<b><code><span style="color:#3366CC;font-size:1.2em;">rm -rf /*</span></code></b> (ignore error messages).# Shut down the centos3 VM. If you tried to start the centos3 VM, it would not boot since all system files have been removed!# Restore the original image from the backup in your home directory by typing this command:<br><b><code><span style="color:#3366CC;font-size:1.2em;">gunzip < ~YourUserId/centos3.qcow2.backup.gz > centos3.qcow2'''</span></code></b># Restart the VM. Is it working normally?# Create compressed backups of your other virtual machines (ie. '''centos1''' and '''centos2''').# You should make a copy of the xml configuration file in case you "wipe" and re-install the host machine, and want to add a restored VM backups to the virtual machine manager list. We will demonstrate using the centos3 xml configuration file, and prove that a "clone" can be added to your list.Please perform the following step:# Execute the following command: <b><code><span style="color:#3366CC;font-size:1.2em;">virsh dumpxml centos3 > centos3.xml</span></code></b># Examine the file <b><code><span style="color:#3366CC;font-size:1.2em;">centos3.xml</span></code></b>. What does it contain? What format is it in?<br><br># We will now learn how to download a compressed image file and xml configuration file and add it as a VM to the virtual manager menu.# Issue the following commands:<ul><li><b><code><span style="color:#3366CC;font-size:1.2em;">wget http://cs.senecac.on.ca/~murray.saul/ops235/practical1.qcow2.gz</span></code></b></li><li><b><code><span style="color:#3366CC;font-size:1.2em;">wget https://scs.senecac.on.ca/~murray.saul/ops235/practical1.xml</span></code></b><br><br></li></ul><ol><li value="17">Copy these files to the '''/var/lib/libvirt/images''' directory and decompress the image</li><li>Make certain your present working directory is: '''/var/lib/libvirt/images'''</li><li>Issue the command: <b><code><span style="color:#3366CC;font-size:1.2em;">virsh define practical1.xml</span></code></b></li><li>What happened in the virtual manager window? To remove a VM entry in the Virtual Manager window, simply issue the command: '''virsh undefine vm_name''' (without the '''.xml''' file extension)</li><li> Launch the VM to see if it boots-up</li><li>Can you log into this VM? Perhaps your instructor will give you a clue in week #7... >;p<br><br></li></ol>{| width="40%" align="right" cellpadding="10"|- valign="top"|colspan="2"|{{Admon/tip|Shutting Down the Host while Virtual Machines are Running|If you shut down your host system while virtual machines are running, they will be suspended, and will resume the next time you boot your host system.}}|}<ol> <li value="22">For the remainder of these labs, it is assumed that you will backup <u>'''both'''</u> the images and xml configuration files for <u>'''all'''</u> Virtual machines, when asked to backup your virtual machines. It is also highly recommended to backup these files to an external storage device (eg. USB key) in case the host machine gets "wiped" and you need to rebuild your HOST machine and then restore your Virtual Machines...</li><li>Answer this question in your log book:</li></ol>::* In order to fully back up a virtual machine, what information should be saved in addition to the virtual machine image?<ol><li value="24">A previous OPS235 student graciously created a shell script that you can download and run to check to see how you performed this lab (to see if you are on the right track).<br>Simply issue the command: <b><code><span style="color:#3366CC;font-size:1.2em;">wget http://matrix.senecac.on.ca/~murray.saul/ops235/lab2check2.bash</span></code></b> and run on your '''c7host machine'''.<br><br>'''If the shell script indicates any major errors, please inform your OPS235 instructor or lab assistant to advise what to do'''.<br><br></li></ol>   === Part 3: Manipulating VM Backup &amp; Management by Shell Scripts ==={|width="40%" align="right" cellpadding="10"|- valign="top"|{{Admon/tip|Bash Shell Scripting Tips:|<br>'''<u>Data Input</u>'''<br><ul><li>A shell script can obtain data from a number of methods: '''reading input files''', using '''arguments when issuing command''' (positional parameters), or '''prompting for data to store in a variable'''. The later method can be accomplished by using the '''read''' command.<br><br></li><li>Example:<br><br>''read -p "Enter your name: " userName''.<br><br></li></ul>'''<u>Mathematical Expressions</u>'''<br><ul><li>In shell scripting, data is stored in variable as text, not other data types (ints, floats, chars, etc) like in compiled programs like C or Java. In order to have a shell script perform '''mathematical operations''', number or variable need to be surrounded by two sets of parenthesis '''((..))''' in order to convert a number stored as text to a binary number.<br><br></li><li>Examples<br><br>''var1&#61;5;var2&#61;10''<br>''echo "$var1 + $var2 &#61; $((var1+var2))"''<br><br>'''Note:''' shell does not perform floating point calculations (like '''5/10'''). Instead, other commands like '''awk''' or '''bc''' would be required for floating point calculations (decimals)<br><br></li></ul><u>'''Loops (for / while / until)'''</u><ul><li>Determinant loops (such as '''for''' loops) usually repeat for a preset number of times (eg. counts, positional parameters stored). In-determinant loops (such as '''while''' or '''until''' loops) may repeat based on unknown conditions (like waiting for user to enter correct data).<br><br></li><li>Conditional statements '''&amp;&amp;''' (run if previous command or test is true) and '''&#124;&#124;''' (run is previous command or test is false) can also be used when testing multiple conditions.<br><br></li><li>Examples:<br>''set ops235 is fun''<br>''for x''<br>''do''<br>&nbsp;''echo "argument is $x"''<br>''done''<br><br>''for x in $(ls)''<br>''do''<br> &nbsp;''echo "Filename: $x"''<br>''done''<br><br>''read -p "enter a whole number: " num''<br>''until echo $num &#124; grep -q "^[0-9][0-9]*$"''<br>''do''<br> &nbsp;''read -p "Incorrect. Please enter WHOLE NUMBER: " num''<br>''done''<br><br>''read -p "pick a number between 1 and 10: " num''<br>''while [ $num -lt 1 ] &#124;&#124; [ $num -gt 10 ]<br>''do''<br> &nbsp;''read -p "Incorrect. Please pick number between 1 and 10: " num''<br>''done''<br><br></li></ul>}}|} You will continue our use of Bash Shell scripting by first creating a Bash Shell script that will allow the Linux sysadmin to select their created VMs for backup to root's home directory. Afterwards you will download, view and run a couple Bash Shell scripts that use the virsh command to start and stop your virtual machines. Perform the following steps: # Start the '''centos1''' virtual machine, and stop the '''centos2''' and '''centos3''' virtual machines.# Switch to the '''c7host''' machine, and open a shell terminal.# Enter these admin commands into your '''c7host''' machine and note the result::: <b><code><span style="color:#3366CC;font-size:1.2em;">virsh list</span></code></b>:: <b><code><span style="color:#3366CC;font-size:1.2em;">virsh list --all</span></code></b>:: <b><code><span style="color:#3366CC;font-size:1.2em;">virsh list --inactive</span></code></b><ol><li value="4">Now, shut-down your centos1 VM normally, and close the centos1 VM window.</li><li>Switch to your terminal and issue the command: <b><code><span style="color:#3366CC;font-size:1.2em;">virsh start centos1</span></code></b></li><li>Using the appropriate command check to see if your centos1 VM is now running.</li><li>There are other commands that can be used (such as '''suspend''', or '''shutdown'''). The "shutdown" command may not always work since it relies on the guest handling a particular ACPI event. Why do you think it is useful to have commands to manipulate VMs?</li><li>Since this is a text-based version of Linux, you do not need to turn off the screen-saver.</li></ol>{{Admon/important|Virtual Machine Does not Shutdown from Command|If the Virtual machine fails to shutdown from the <code>virsh shutdown</code> command, then you can go to the '''Virtual Machine manager''' and '''halt''' or '''shutdown''' within the VM itself, then you can click the '''PowerOff''' button in the VM window. You'll want to avoid a forced shutdown since those are equivalent to yanking the power cord out of the wall on a physical machine!|}}<ol><li value="9">Open a Bash shell terminal and login as root.</li><li>Use a text editor (such as <b><code><span style="color:#3366CC;font-size:1.2em;">vi</span></code></b> or <b><code><span style="color:#3366CC;font-size:1.2em;">nano</span></code></b>) to create a Bash Shell script called: <b><code><span style="color:#3366CC;font-size:1.2em;">backupVM.bash</span></code></b> in /root's home directory.</li><li>Enter the following text content into your text-editing session:<code style="color:#3366CC;font-family:courier;font-size:.9em;margin-left:20px;"><br>&#35;!/bin/bash  &#35; backupVM.bash<br>&#35; Purpose: Creates system info report<br>&#35;<br>&#35; USAGE: ./report.bash<br>&#35;<br>&#35; Author: *** INSERT YOUR NAME ***<br>&#35; Date: *** CURRENT DATE ***  if [ $PWD != "/root" ] # only runs if in root's directory<br>then<br>&nbsp;echo "You must be located in /root" >&2<br>&nbsp;exit 1<br>fi</code><br></li><ol><li value="12">Save your editing session, but remain in the text editor.</li><li>This shell script is designed particularly for your centos1, centos2, and centos3 VMS.</li><li>The code displayed below will prompt the user if they wish for all VMs to be backed-up; otherwise, allow the user the option of specifying which VMs to be backed-up. Add the following code</li></ol><br><code style="color:#3366CC;font-family:courier;font-size:.9em;"> read -p "Backup all VMs? (y|n):" answer # prompt if all VMs to be backed-up if [ "$answer" = "y" ] # Backup all VMs if answer is yes<br>then<br>&nbsp;for num in 1 2 3 # Determinant loop for 3 arguments: 1, 2, and 3<br>&nbsp;do<br>&nbsp;&nbsp;echo "Backing up VM #$num"<br>&nbsp;&nbsp;gzip < /var/lib/libvirt/images/centos$num.qcow2 > /root/centos$num.qcow2.backup.gz<br><br>&nbsp;&nbsp;echo "VM #$num BACKUP DONE"<br>&nbsp;done<br><br>elif [ "$answer" = "n" ]<br>then<br>&nbsp;read -p "Which VM should be backed up? (1/2/3): " numanswer<br>&nbsp;until echo $numanswer | grep "^[123]$" >> /dev/null # Look for match of single digit: 1,2, or 3<br>&nbsp;do<br>&nbsp;&nbsp;read -p "Invalid Selection. Select 1, 2, or 3: " numanswer<br>&nbsp;done<br>&nbsp;echo "Backing up VM #$numanswer"<br>&nbsp;gzip < /var/lib/libvirt/images/centos$numanswer.qcow2 > /root/centos$numanswer.qcow2.backup.gz<br><br>&nbsp;echo "VM #$numanswer BACKUP DONE":<br>else<br>&nbsp;echo "Invalid Selection... Aborting program"<br>&nbsp;exit 2<br>fi </code>  <ol><li value="15">Save, set permissions, and then run that shell script to backup centos1. Confirm that this script did backup this image to root's home directory</li><li>Use the <b><code>wget</code></b> command to download, study, and run the following shell scripts on-line:<blockquote><b><code><span style=" pointer-events:none;cursor:default;color:#3366CC;font-size:1.2em;">https://scs.senecac.on.ca/~murray.saul/vm-start-text.bash<br>https://scs.senecac.on.ca/~murray.saul/vm-stop-text.bash</span></code></b><br><b><code><span style=" pointer-events:none;cursor:default;color:#3366CC;font-size:1.2em;">https://scs.senecac.on.ca/~murray.saul/vm-start.bash<br>https://scs.senecac.on.ca/~murray.saul/vm-stop.bash</span></code></b></blockquote></li><li>Try to understand what these Bash Shell scripts do.</li><li>You have completed lab2. Proceed to Completing The Lab, and follow the instructions for "lab sign-off".</li></ol>    '''Answer INVESTIGATION 2 observations / questions in your lab log book.'''  = LAB 2 SIGN-OFF (SHOW INSTRUCTOR) ={{Admon/important|Backup ALL of your VMs!|If you have successfully completed this lab, make a new backup of all of your virtual machines onto your UBS Key.}} '''Perform the Following Steps:''' # Make certain ALL of your VMs are running.# Switch to your '''centos2''' VM, open a terminal, login as root, and change directory to '''/root/bin'''.# Issue the Linux command: <b><code><span style="color:#3366CC;font-size:1.2em;">wget http://matrix.senecac.on.ca/~murray.saul/ops235/lab2-check-vm.bash</span></code></b># Give the '''lab2-check.bash''' file execute permissions (for the file owner).# Run the shell script and if any warnings, make fixes and re-run shell script until you receive "congratulations" message.#Arrange proof of the following on the screen: ::&#x2713; '''<u>All</u> VMs''':<blockquote><ul><li>All 4 VMs '''created''' and '''running'''</li><li> Proof of '''yum updates''' on ALL VMs (i.e. results from '''yum update''' command)</li></ul></blockquote>::<span style="color:green;font-size:1.5em;">&#x2713;</span>'''centos2 VM''':<blockquote><ul><li>Output from running the '''lab2-check.bash''' script with all OK messages</li></ul></blockquote>::<span style="color:green;font-size:1.5em;">&#x2713;</span> Lab2 logbook notes and '''Installation Comparison chart''' completed. = Practice For Quizzes, Tests, Midterm &amp; Final Exam = # What is the name of the CentOS installation program?# What is the name of the file created by the CentOS installation program?# Which type of installation works best for confirming compatibility with hardware before installation? Why?# Which type of installation works best for installing large numbers of computers? Why?# How can you reduce the number of software updates required immediately after installation?# How do you start and stop virtual machines?# How do you SSH into your virtual machines?# List the steps to install a VM from:<ul><li>Downloaded iso file</li><li>Network install (without kickstart file)</li><li>Network install (with kickstart file)</li></ul># What is the purpose of the virsh command?# How to start and stop VMs using the virsh command?# List the steps to correctly backup your VMs to a USB disk# List the steps to correctly restore your VMs from a USB disk to your c7host VM.  [[Category:OPS235]]REDIRECT [[Category:OPS235 Labs]]
13,420
edits

Navigation menu