932
edits
Changes
m
Updating host names for winter semester.
{{Admon/important|Prerequisites|
Your hard drive should have Centos 6.5, 64 bit already installed.<br />
You have Fedora 20, 64bit version on VM01VM1, VM02VM2, and VM03VM3.<br />
Both your host and all VMs should have SELinux enabled.<br />
Both host and all VMs should have all software updated.<br />
*Ensure you can access the web on your host machine and all your VMs.
=== Install and test Apache on your VM01 VM1 and VM03 VM3 ===*Login to vm01 vm1 and install the following packages:
yum install httpd httpd-tools
*Still on vm01 vm1 you can now start your web server with this command and enable the service to start at boot.
systemctl start httpd.service
systemctl enable httpd.service
* Using a text browser such as lynx on vm01 vm1 go to localhost. You should get the "Fedora Test Page" which indicates your web server is running on the local virtual machine.*backup your existing iptables rules on vm01 vm1 (make sure it still meets the specifications set out in the earlier labs) and add a rule to allow new traffic to your http server.*Using Firefox on the <b>host</b> go to address for vm01 vm1 "192.168.X.2" (your ip addressing may differ). You should get the "Fedora Test Page" which indicates you can access your web server on VM01 VM1 via network connection. Do not continue until this step works.
**Once you have this working, save your iptables.
*You should also be able to open the webpage using the hostname of vm01vm1.
*Now create your <b>own</b> test page named index.html in the directory /var/www/html/. This does not have to anything fancy, just a [http://validator.w3.org/docs/help.html#validation_basics valid] html page with enough content for you to recognize it as your own. Reload the web page on the host - you should see your own test page now instead of the default page from apache.
*Repeat the above steps for vm03vm3. Remember that it is using a different firewall.*Now, as root on the gateway/host, try to forward incoming http connections to your host to the web server on vm01vm1. Use an iptables command something like this
iptables -t nat -A PREROUTING -i *yourinterface* -p tcp --dport 80 -j DNAT --to 192.168.X.2
*You will also need to create a rule in the FORWARD chain in the default table to accept connections to port 80.
*To test this setup you'll need to ask a classmate on another PC to try to use Firefox to view your web page. S/he'll have to enter your host's external interface IP number (142.204.141.yyy) in Firefox's address window.
*Login to your vm01 vm1 (and then vm03vm3) as root, edit the Apache configuration file and change the port your webserver is listening for incoming connections from 80 to 8080.
vi /etc/httpd/conf/httpd.conf
*Change your firewall rules on vm01 vm1 (and also vm03vm3) to allow connections to this port (8080), and remove the previous rule to allow connections to port 80.*Restart the apache server on vm01 vm1 and vm03 vm3 (this may take a minute).*Go back to the host and redo your iptables command to forward connections to port 80 (on your host) to the new port 8080 on vm01vm1, removing the previous rule for port 80.
*Verify that other students on their PCs can still view your web page.
=== Load balancing using iptables ===
*Iptables can be used for load balancing connections. On your host machine add a rule(s) to the PREROUTING chain that will alternate connections bound for port 80 on your host machine to vm01 vm1 and vm03 vm3 (remove the other prerouting rules you created before doing this).
iptables -t nat -I PREROUTING -p tcp --dport 80 -m state --state NEW -m statistic --mode nth --every 2 --packet 1 -j DNAT --to-destination 192.168.X.4:8080
iptables -t nat -I PREROUTING -p tcp --dport 80 -m state --state NEW -m statistic --mode nth --every 2 --packet 0 -j DNAT --to-destination 192.168.X.2:8080
=== Add missing DNS resource records ===
* Edit your forward look-up zone file and add the following resource records.
** A mail exchange record that points mail for the domain to vm02vm2.
** Alases as follows:
***host - alias router
***vm02 vm2 - alias mail***vm01 vm1 - alias www1***vm03 vm3 - alias www2
**Add text records that identify the roles on each of these machines and a text record for the domain "This is < your full name here>'s OPS335 Domain".
**Once these records have been added, be sure to increment your Serial number for the zone file. While not crucial for the lab as we do not yet have a slave DNS server, getting into the habit ensures slaves will be informed of the changes.
=== Adding Webmail to your domain ===
*In order for our domain to offer webmail services to its users you will need to install the following packages on vm02vm2
yum install squirrelmail httpd dovecot
*The SquirrelMail files are in /usr/share/squirrelmail, create the a symbolic link to share those files on the internet.
chmod 0600 /var/mail/*
*you should now start and enable dovecot, httpd and restart postfix if it was already running.
*test your connection to SquirrelMail by opening a browser and navigating to vm02vm2/mail. You should see a log in page. Sign in using your login credentials on vm02vm2.
**You may receive an error stating: 'Error connecting to IMAP server: localhost. 13 : Permission denied'. If you do, run the command 'setsebool -P httpd_can_network_connect=1'. This will set an SELinux boolean to allow httpd connections across the network.
*You will need to open ports on your firewall to allow connections to the webserver, and port forwarding on the host so that any web traffic sent to it will be redirected to your VM2.
#What user/group does Apache run under on Fedora 20?
#What % share of the web server market was running apache as of December 2013?
#What specific command (give full details) would you need to use on your host to forward all ssh connections to vm01vm1?
#What is the web site for Apache?
#What is Apache's highest version number? What is the version running on your system?
