13,420
edits
Changes
no edit summary
[[Category:OPS335]][[Category:OPS335 Labs]]
==OBJECTIVE & PREPARATION==
According to the samba.org website:
''"Samba is the standard Windows interoperability suite of programs for Linux and Unix. Samba is Free Software licensed under the GNU General Public License, the Samba project is a member of the Software Freedom Conservancy."''
Although a Samba server can provide many features such as printer sharing and backups, this lab's primary focus is to set up a Samba server on a Linux server in order to allow MS Windows users to share common files from the Linux's Samba server.
This lab will first install, setup, and enable a Samba server. Then users will access files on the Linux Samba server from Linux and Windows client machines (both graphically and command line).
=== Online Resources===
* (Course Notes on Samba Server)
*[http://www.tomsitpro.com/articles/linux-server-configuration-guide-book-excerpt,2-777-2.html Samba Server Setup] (Simple setup guide for samba server]
==INVESTIGATION 1: INSTALLING & CONFIGURING A SAMBA SERVER==
In this investigation, we will set up a '''Samba server''' on our '''VM2''' machine. We will first install, configure and enable the samba server on our virtual machine, and then we will quickly test to see if the Samba server works.
{{Admon/important|Prerequistites|Due to the changes made in lab3, '''you will now need your vm1 running (as the DNS server)''' in order for any of your virtual machines to be able to use the internet.}}
'''Perform the following steps:'''
#Make certain that both your '''VM1''' and '''VM2''' machines are running.
#Switch to your '''VM2''' machine as the '''root''' user.
#Issue the following Linux command to install Samba server utlity:<br>'''yum install samba samba-client'''<br>
#Copy the file '''/etc/samba/smb.conf''' to another filename by issuing the following command:<br>'''cp /etc/samba/smb.conf /etc/samba/smb.conf.original'''
#Clear the contents of the configuration file by running '''cat /dev/null > /etc/samba/smb.conf'''
#Edit '''/etc/samba/smb.conf''' so that the file that contains the following lines:
[global]
workgroup = WORKGROUP
server string = "put your real name here without the quotes"
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
[home]
comment = "put your real name here without the quotes"
path = /home/<yourSenecaID>
public = no
writable = yes
printable = no
create mask = 0765
<ol><li value="3">Append (add) the following parameter to the bottom of the '''[global] section''' that will limit access to the share so that only machines in your virtual network will be able to access it:</li></ol>
hosts allow = 192.168.x. 127.0.0.1
<ol><li value="4">Append (add) the following parameter to the '''[home] section''' so that only your user account can access that share:</li></ol>
valid users = <yourSenecaID>
<ol><li value="5">Create a Samba account and password for yourSenecaID by issuing the following command:<br>'''smbpasswd -a <yourSenecaID>'''</li></ol>
{{Admon/tip|Changing Existing Samba Account Passwords|If you need to change a user's existing Samba account password, you can issue the following command as root: '''smbpasswd username'''.}}
<ol><li value="6">Confirm the user you created has been added using the following command:<br>'''pdbedit -L -v'''</li><li>Test and review your configuration with the command:<br>'''testparm'''</li><li>Use the '''systemctl''' command to start the smb.service and enable the service to run on boot-up</li><li>Since we set SELinux to enforcing, we will need to tell it to allow samba access to home directories: '''setsebool -P samba_enable_home_dirs 1'''</li><li>Use the '''ss -nautp''' command to see with port Samba is running on.</li><li>Use the information in the previous step to modify the firewall on VM2 machine to allow samba traffic.</li><li>Test to see that you can connect to your Samba server (locally) by issuing the following command:<br>'''smbclient -U <yourSenecaID> -L 127.0.0.1'''</li><li>When prompted, enter your Samba account password.</li><li>The output from that issued command show appear similar to example displayed below:</li></ol>
Sharename Type Comment
--------- ---- -------
home Disk Your Name
IPC$ IPC IPC Service ("Your Name")
Domain=[WORKGROUP] OS=[Windows 6.1] Server=[Samba 4.2.3]
Server Comment
------ -------
WorkGroup Master
--------- ------
<ol><li value="13">To access the Samba client shell on your local Samba share, issue the following command:<br>'''smbclient '\\127.0.0.1\home' -U <yourSenecaID>'''</li><li>Enter your Samba account password.</li><li>Issue the help command to note common commands (''dir'', ''cd'', ''ls'', ''put'', ''get''). Note how similar they are to ''sftp'' commands.</li><li>Enter '''exit''' to terminal your local Samba session.</li></ol>
You can use smbclient to access, browse and share files within other Linux and Windows servers using a variety of tools which will be demonstrated in Investigations 2 and 3.
'''Record steps, commands, and your observations in INVESTIGATION 1 in your OPS335 lab log-book'''
==INVESTIGATION 2: CONNECTING TO A LINUX SMB SERVER FROM A LINUX CLIENT==
In this investigation you will explore some of the different ways to access a shared directory from a Linux client machine (VM1).
'''Perform the following steps on your VM1'''
=== Using smbclient ===
*Install the '''samba-client''' and '''cifs-utils''' packages.
*Use the "smbclient" command in a terminal window.
smbclient '\\vm2\home' -U <learnid>
*After entering your password you should get a prompt similar to
smb: \>
*Enter the ls command to see a list of the files in your home directory.
smb: \> ls
*Once you have access to the directory use the get and put commands (similar to ftp) to move files.
*When you are finished close the connection.
*Note that this tool only gave temporary access with a limited set of commands.
=== Using 'mount -t cifs' ===
*The next way is to use the mount command.
*Use the mount command on '''vm1''' to mount your home directory
mkdir /tmp/vm2-home
mount -t cifs //vm2/home /tmp/vm2-home -o username=<learnid>
ls /tmp/vm2-home
*Create a file in that directory, then switch to '''vm2''' to confirm that it was created.
*Use umount on '''vm1''' to unmount that directory.
*Note that this tool would leave the directory mounted until the machine rebooted or it was manually unmounted. It would also allow other users access to the directory, as it effectively became part of the local filesystem. It could even be added to fstab to be mounted on boot (if it didn't need a password).
'''The following steps require a graphical interface; perform them on your HOST'''
=== Using Nautilus to browse Samba shares ===
*Install the '''samba-client''' and '''cifs-utils''' packages.
*Use the "Places" menu from the desktop and open 'Browse Network'.
*From the menu in the side-bar of the files tool, choose 'Connect to Server'.
*Enter 'smb://vm2/home' as the location, and enter your samba password in the prompt.
**Where vm2 is the name of the server, and home is the name of the directory it is sharing.
*After you have checked that you can access your files, unmount the share by right-clicking its icon in the side-bar and clicking 'Unmount'.
=== Using a browser ===
*You can also use a web browser with support for the SMB protocol such as Konqueror.
**Note that firefox does not have such support.
*If Konqueror is not installed then install it with the command:
yum install kdebase
*Start Konqueror, the web/file browser, and in the address bar enter the following
smb://vm2/home
*Enter your username and password when prompted.
*Double click on a file you have some text in.
**Open it with gedit, make some changes, and save it.
**When prompted, choose to upload the file.
*Close Konqueror.
*cat the file on your VM2 to ensure the changes were properly uploaded.
'''Record steps, commands, and your observations from this INVESTIGATION in your OPS335 lab log-book'''
==INVESTIGATION 3: CONNECTING TO A SAMBA SERVER FROM A WINDOWS CLIENT==
This investigation will configure your VM2 machine to act as a Samba File server to allow Windows OS Users access to the Linux Samba server files.
===Accessing Files on a Linux Samba Server via Windows Explorer ===
With some additional "tweaking" to your Linux Samba server configuration file, you should be able to access files on that file from a Windows machine on the same network. You will be creating a Samba share for your home directory of your regular user account.
'''Perform the following tasks:'''
# Make certain that your '''VM2''' machine is running, is still allowing samba traffic through the firewall, and is still running the samba service.
# Power up a Windows system in the lab and login.
# Add the prerouting and forwarding rules to your host's iptables necessary to redirect samba traffic from outside your network to your VM 2.
# Modify the hosts allow setting on your '''vm2''' to also accept connections from the windows machine you are using.
# Open the Windows Explorer application.
# At the top of the application, enter the following:<br>'''\\IPADDR_OF_HOST_MACHINE\home'''
{| width="40%" align="right" cellpadding="10"
|- valign="top"
|
[[Image:samba-login.png|thumb|right|300px|You will be prompted (once only) for the Samba user-name and password for your '''VM2''' machine). ]]
|
[[Image:samba3-map-drive.png|thumb|right|300px|You can create a '''mapped network drive (z:)''' for your Linux Samba server network share). ]]
|}
<ol><li value="5"> You will be prompted to enter your VM2 username and password (one time only). Refer to diagram on right.<br><br>'''NOTE:''' It may take approximately 30 seconds to display the file contents.<br><br></li><li>Where your successful? If not, try to troubleshoot the problem first, then ask your lab assistant or instructor for assistance.</li><li>Close the Windows Explorer application window.</li><li>Click on the '''START''' menu, and click on '''This PC'''.</li><li>Click on the Map Network Drive button, and create a '''mapped network drive''' (called it drive '''Z:''') which is a Samba share of your VM2 machine for the home directory.</li><li>When finished, click on '''Network''' in Windows file manager to confirm that the network share is present.</li><li>Try to create a file on Windows on your Linux Samba machine. Were you able to create a save a file?</li><li>Switch to your VM2 machine and check to see if that file was created in your home directory.</li></ol>
{{Admon/important |Backup your VMs!|You MUST perform a '''full backup''' of ALL of your VMs whenever you complete your '''OPS335 labs''' or when working on your '''OPS335 assignments'''. You should be using the dump command, and you should use the Bash shell script that you were adviced to create in order to backup all of your VMs.}}
'''Record steps, commands, and your observations from this INVESTIGATION in your OPS335 lab log-book'''
==COMPLETING THE LAB==
In completing this lab you have gained experience using a service that allows remote access to files stored on a Linux server. You have also learned how to use several different tools to access those files, both from a Linux and Windows client..
'''Depending on your professor you will either be asked to submit the lab in class, or online. Follow the appropriate set of instructions below.'''
===Online Submission (Peter Callaghan's Classes only)===
Follow the instructions for lab 6 on moodle.
===In Class Submission===
'''Arrange evidence (command output) for each of these items on your screen, then ask your instructor to review them and sign off on the lab's completion:'''
::<span style="color:green;font-size:1.5em;">✓</span> Proof of network share of VM2 machine from Windows VM via Windows Explorer application
::<span style="color:green;font-size:1.5em;">✓</span> Firewall settings on your Windows VM to allow Linux Samba network share
::<span style="color:green;font-size:1.5em;">✓</span> Display contents of '''/etc/samba/smb.conf''' file on VM2 machine
::<span style="color:green;font-size:1.5em;">✓</span> Firewall exceptions (both machines) to allow Samba traffic
::<span style="color:green;font-size:1.5em;">✓</span>Download the labcheck6.bash checking bash shell script by issuing the command:<br><br>'''wget http://matrix.senecac.on.ca/~peter.callaghan/files/OPS335/labcheck6.bash'''<br><br>set execute permission and run the shell script on your '''c7host''' machine.
::*For '''Peter's classes''', follow his Online Submission instructions in Moodle.
::*For '''Murray's classes''', run command (piping to the '''more''' command) and show output to instructor.
::<span style="color:green;font-size:1.5em;">✓</span>Completed Lab6 log-book notes.
==EXPLORATION QUESTIONS==
#What does SMB stand for?
#What does CIFS stand for?
#What is the purpose of the '''testparm''' command?
#What does the text inside square brackets in the '''smb.conf''' file mean? (e.g., "[home]").
#Explain the meaning of the line "create mask = 0765" in the smb.conf file?
#What does the '''smbpasswd''' command do?
