Changes

[[Category:OSTEP EquipmentEnterprise Hyperscale Lab]]

== Default Linux Installation (Factory Image) ==

* eth0: 1GBE upper-right corner (above USB ports)* eth1: 1GBE lower-left corner* eth2: 1GBE upper-left corner* eth3: 10GBE sfp+

All four ports have been confirmed to work. <code>iperf</code> reports 9.41 GBGb/s on the 10GBE port when directly connected to another X-Gene.

== DHCP IP Information ==

DHCP can be invoked These machines are currently connected to Iraq, with "dhcp static IPs on the eth0" from the serial portmac addresses.

These machines are currently connected to Iraqhas the corresponding hostnames ''red'', ''blue'', and ''green'' assigned in /etc/hosts (these names match the original ethernet cable colours, with static IPs locked to though red is not used within the eth0 mac addresses[[EHL]] because it is reserved for serial connections).

Iraq has The serial console port of each system is connected to the corresponding hostnames ''red'', ''blue'', and ''green'' assigned in /etc/hosts (these names match the ethernet cable colours)[[Cyclades Terminal Server]].