1,885
edits
Changes
Created page with 'Basic information about the X-Gene Servers == Boot Software == The systems ship with uBoot in SPI flash with console on serial /dev/ttyS0 at 115200/8/n/1 == Default Linux Inst…'
Basic information about the X-Gene Servers
== Boot Software ==
The systems ship with uBoot in SPI flash with console on serial /dev/ttyS0 at 115200/8/n/1
== Default Linux Installation ==
User/pass: root/root
User/pass: default/NULL
~800MB
IP Address is preset to 10.x.x.x
== Ethernet port assignments ==
With the default Linux installation:
eth0: 1GBE upper-right corner (above USB ports)
eth1: 1GBE lower-left corner
eth2: 1GBE upper-left corner
eth3: 10GBE sfp+
All four ports have been confirmed to work. <code>iperf</code> reports 9.41 GB/s on the 10GBE port when directly connected to another X-Gene.
== DHCP ==
DHCP can be invoked with "dhcp eth0" from the serial port.
These machines are currently connected to Iraq, with static IPs locked to the eth0 mac addresses.
Iraq has the corresponding hostnames ''red'', ''blue'', and ''green'' assigned in /etc/hosts (these names match the ethernet cable colours).
== Boot Software ==
The systems ship with uBoot in SPI flash with console on serial /dev/ttyS0 at 115200/8/n/1
== Default Linux Installation ==
User/pass: root/root
User/pass: default/NULL
~800MB
IP Address is preset to 10.x.x.x
== Ethernet port assignments ==
With the default Linux installation:
eth0: 1GBE upper-right corner (above USB ports)
eth1: 1GBE lower-left corner
eth2: 1GBE upper-left corner
eth3: 10GBE sfp+
All four ports have been confirmed to work. <code>iperf</code> reports 9.41 GB/s on the 10GBE port when directly connected to another X-Gene.
== DHCP ==
DHCP can be invoked with "dhcp eth0" from the serial port.
These machines are currently connected to Iraq, with static IPs locked to the eth0 mac addresses.
Iraq has the corresponding hostnames ''red'', ''blue'', and ''green'' assigned in /etc/hosts (these names match the ethernet cable colours).
