Open main menu

CDOT Wiki β

Review Questions for Test 1

What command will list all partitions on all hard drives?

  • fdisk
  • fdisk -l
  • partprobe
  • FDISK

what is wrong with this statement?

dd if=/dev/zero of=/tmp/mytest.img bs-1024 count-10000

  • wrong of file type
  • cannot have zeroes in an img file
  • typing error
  • if and of in the wrong order

Which directory usually contains the GNU/Linux boot files?

  • /
  • /root
  • /boot
  • /home directory of user who is booting the system

The user password are stored in which file?

  • /etc/passwd
  • /etc/shadow
  • /etc/password
  • none of above

Grub is a boot loader. It is used to load Linux kernel & driver module files in to memory by reading the configuration file. The name and path of GRUB configuration file is

  • /etc/grub/grub.conf
  • /root/grub.conf
  • /etc/grub.conf
  • /boot/grub.conf

resize2fs command is used ?

  • to enlarge or shrink the size of partitions on harddisks
  • to change the physical volumes (PVs)
  • to enlarge or shrink the size of Logical Volumes (LVM)
  • to enlarge or shrink the ext2 and ext3 file systems

The Name and path of the linux kernel is

  • /boot/vmlinux.2.6.25.14-108.fc9.i686
  • /boot/initrd.2.6.25.14-108.fc9.i686
  • /boot/Linus.torvalds.2.6.25.14-108.fc9.i686
  • /boot/vmlinuz-2.6.26.3-29.fc9.i686

Linux need at least two minimum partitions for installation named

  • /root & swap
  • /root & /boot
  • / & swap
  • /root & /red knot

File system must requires a container. The container may be

  • Disk Partition
  • File
  • Logical volume (LVM)
  • All of above

To mount a new file system permanently, so that it is available automatically across the rebooting,a entry is required to made in a file, The name of the file is

  • /etc/inittab
  • /etc/fstab
  • /boot/grub/grub.conf
  • /etc/automounttab

What is the purpose of the sudo command?

  • to allow a permitted user to execute ftp
  • to start the Suse linux kernel
  • to allow a permitted user to execute a command as the superuser or another user
  • to switch to the root user

What command would you use to set the maximum mount count of the file system to 100?

  • tune2fs /dev/sda7 -c 100
  • tune2fs /dev/sda2 -m 100
  • resize2fs /dev/sda3 -c 100
  • resize2fs /dev/sda5 -m 100

There is one line "#chkconfig: 3 92 08" in your script file. Its name is carpal and it is saved in /etc/init.d/ directory. When you execute the command "chkconfig --add carpal", What will happen?

  • to produce links: "/etc/rc5.d/S92carpal" and "/etc/rc3.d/K08carpal"
  • to produce links: "/etc/rc5.d/S92carpal" and "/etc/rc0.d/K08carpal"
  • to produce links: "/etc/rc3.d/S92carpal" and "/etc/rc0.d/S08carpal"
  • to produce links: "/etc/rc3.d/S92carpal" and "/etc/rc0.d/K08carpal"

Different Linux distributions uses different tools to install a package. Which one of following statements is true ?

  • Ubuntu uses apt-get, Opensuse uses zypper and Fedora uses yum or pkcon
  • Ubuntu uses pkcon or zypper, Opensuse uses yum and Fedora apt-get
  • Ubuntu uses zypper, Opensuse uses apt-get and Fedora uses yum or pkcon
  • Ubuntu uses yum, Opensuse uses pkcon and Fedora uses yum or apt-get

How to unpack the file "linux-2.6.26.tar.bz2"?

  • tar cvjf linux-2.6.26.tar.bz2
  • tar xvjf linux-2.6.26.tar.bz2
  • tar tvjf linux-2.6.26.tar.bz2
  • gunzip linux-2.6.26.tar.bz2|tar cvf -

How to compile kernel and modules?

  • make oldconfig
  • make
  • make modules
  • rpmdev-setuptree
  • make modules_install

How to create a initial ram disk image?

  • initrd (hd1,0)/initrd-2.6.26.5-45.fc9.i686.img
  • initrd /initrd-2.6.26.5-45.fc9.i686.img
  • mkinitrd -k vmlinuz-2.6.26 -i initrd-2.6.26
  • mkinitrd (hd1,0)/initrd-2.6.26.5-45.fc9.i686.img

What is a daemon?

  • Just a process to stop another program
  • A software process that runs in the background and provides the service to client upon request
  • A process that runs one time. Once done it will stop
  • A process that prevents multiple occurances from running at one time

What's the default run-level in Fedora ?

  • 1
  • 2
  • 3
  • 4
  • 5
  • 7

Which command can reboot the system?

  • init 0
  • init 2
  • init 4
  • init 6
  • telinit 6
  • reboot

Circle one, which is true for findfs command ?

  • find a filesystem by label or UUID
  • find a filesystem by label and UUID
  • find a filesystem by UUID
  • none of the above

Arrange them in proper order, going first process to last process

  • A) kernel loads the needed kernel modules
  • B) init program
  • C) GRUB
  • D) ROM BIOS loads loader from MBR
  • E) loader finds and loads linux kernel and initial ram disk

D C E A B


The file system structure in GNU/Linux is like a inverted tree. The top of this inverted tree is started from

  • /root
  • /
  • /etc/root
  • /boot

option two (2) / is correct

What is the command to label as "videogames" the filesystem in the device /dev/bdisk ?

  • resize2fs /dev/bdisk videogames
  • fdisk /dev/bdisk videogames
  • e2label /dev/bdisk "videogames"
  • resize2fs /dev/bdisk videogames
  • e2label /dev/bdisk videogames

What is the device represented in the file grub.conf as (hd0,0) ?

  • /dev/hda3
  • /dev/sdc2
  • /dev/hda2
  • /dev/sda1
  • /dev/sdd2
  • /dev/sda2
  • /dev/sdb1

What is the device represented in the file grub.conf as (hd1,0) ?

  • /dev/hda3
  • /dev/sdd2
  • /dev/hda2
  • /dev/sdc2
  • /dev/sda1
  • /dev/sda2
  • /dev/sdb1

What is the device represented in the file grub.conf as (hd1,1) ?

  • /dev/sdb2
  • /dev/hda2
  • /dev/sdd2
  • /dev/sda1
  • /dev/sdc2
  • /dev/sda2
  • /dev/sdb1

What is the device represented in the file grub.conf as (hd0,2) ?

  • /dev/hda3
  • /dev/hda2
  • /dev/sda2
  • /dev/sda3
  • /dev/sdb1
  • /dev/sdc2
  • /dev/sdd2

pvcreate command is used for ?

  • Initialize a disk or partition for use by LVM
  • Creating a LVM
  • Scanning a LVM
  • none of above

_____ command is used to scan all the disks for volume groups and rebuild caches

  • vgchange
  • lvcreate
  • vgscan
  • lvm

When is a good time to use the "partprobe" command ?

  • After creating, deleting or modifying partitions
  • After reboot the system
  • Sometimes
  • In a sunny day

What does the command "partprobe" do ?

  • Query a database
  • Query the kernel version
  • Look for modifications in the partitions of the system and then if something was modified, load the new informations in to the kernel
  • Look for new partitions

Which command can be used to fill your hard drive with 0s ?

  • dd if=/dev/zero of=/dev/sda bs=1M
  • ff
  • e2fs
  • fdisk

Which linux command can be used to make a image ?

  • dd
  • mkisofs
  • dd if=/dev/random of=/dev/device
  • mkimage

What does the command losetup do ?

  • It associates a file to a device (Ex:losetup /dev/loop0 fakedisk)
  • nothing
  • reboot the computer
  • It erases the setup (lose setup)

The Operating system on our computers, we usually call it Linux. But Linux is actually a name for

  • Operating System
  • Kernel
  • boot loader
  • none of above

The easiest way to recover the root password for GNU/LINUX in case we lost it, is

  • open the /etc/passwd file in vi editor & look for root password
  • boot the computer form CD/DVD in run level 5 and run the passwd command
  • boot the computer with MS-Linux Xp/Vista Live CD then click Start->Control Panel->Change MSlinux Password option.
  • boot the system in single user mode & change the root password with /usr/bin/passwd command