1,885
edits
Changes
no edit summary
The easiest way to install the Remix is to use the <!-- [[:fedora:Fedora_ARM_Installer|installer]] --> installer program.
'''For the most up to date information on using the Installer, please visit the [[:fedora:Fedora ARM Installer|Fedora ARM Installer Wiki Page]]'''
Needed:
Steps:
# Download the installer from the appropriate link:#* On a Fedora 18 (link to be provided after mirrors sync upor higher)system: <code>yum install fedora-arm-installer</code>#* Windows (link to be provided after mirrors sync up)#* Other Linux (link to be provided after mirrors sync up)For other operating systems, see the [[:fedora:Fedora ARM Installer|Fedora ARM Installer]] wiki page.
# Run the installer.
# Click the refresh (circle-arrow) button beside the Download list to retrieve a list of available images.
# Select the image you wish to install ("Raspberry Pi Fedora Remix 14Pidora 18") -- or, if you have already downloaded the image file, browse to that file's location.
# Click the refresh (circle-arrow) button beside the Device list to retrieve a list of possible target devices for the installation.
# Select the device on which you wish to install the image (WARNING: all data on this device will be deleted! - be sure you have selected the correct device).
Steps:
# Download the image .# Decompress the image with a Zip-compatible program such as "unzip" (link to be provided after mirrors sync upLinux)or WinZip (Windows).
# Insert your SD/SDHC card into the card reader, and attach to the computer if necessary.
# Identify the device node of the SD card (this will be something like <code>/dev/sdc</code> or <code>/dev/mmcblk0</code>).
#* An easy way to identify the card is to list the device nodes (<code>ls -l /dev/sd* /dev/mmcblk*</code>) before and after inserting the SD card. Device nodes that that appear when the card is inserted correspond to the card.
# Ensure that the device is unmounted.
# Copy the image file to the card: <code>dd if=/dev/''NameOfImageFile'' of=/dev/''DeviceNode''</code>
# Ensure that the image is fully written onto the card: <code>sync</code>
# Remove the card.
