198
edits
Changes
→Known Bugs and Features
{{Pidora}}[[Category:Pidora 18 (Raspberry Pi Fedora Remix)]]
{{Admon/important| Security Warning! | If you are going to use headless mode it is critical that you change the root password as soon as possible, because Pidora is set with a default root password that is publicized.}}
Additionally, Headless Mode will enable services to read your IP Address through plugged in speakers or headphones. It will also flash the IP Address to you on the Raspberry Pi LEDs.
To enable Headless Mode, create a file named "headless" inside the boot file system on the Raspberry Pi's SD card. Create this "headless" file before you boot your Raspberry Pi.
Tutorial Video: http://youtu.be/ALUAmw6Mz_o
Insert the SD card into your system, and create a file named "headless" in the filesystem labelled "boot".
{{Admon/important| Note | If you are using a Windows OS you will need to remove the .txt file extension on the headless file.
[http://www.ehow.com/how_6394953_create-file-extension.html More information on removing file extensions on eHow]}}
Insert the SD card into your system. Only the boot filesystem will be made available, because Windows will not be able to read other partitions on the card. Create a file named "headless" on that partition
There are two possible configurations for Headless Mode "DHCP" configuration and "Static" configuration.
If you would like to configure the Raspberry Pi to use DHCP, ''leave the "headless" file empty'', and the Raspberry Pi should be assigned an IP Address dynamically.
====Optional Configuration====If "RESIZE" is in the "headless" file, the root filesystem will be expanded to the maximum size of the sd card via the service rootfs-resize. If "SWAP"(requires the value in megabytes) exists in the "headless" file, a swap file will be created of the specified size, and then activated. RESIZE SWAP=[Size of swap in megabytes] ====How do I find my IP Address? ==== Once Headless Mode has been Enabled, and the Raspberry Pi has finished booting, the IP Address of the Raspberry Pi will be read out through the speakers or headphones that are connected to the Raspberry Pi. Additionally, the IP Address will be flashed through the LED on the Raspberry Pi soon after the IP Address is read through the speakers. 1 - 9 short flashes indicate the digits 1 - 9 10 short flashes indicate the digit 0 a long flash indicates an octet separator (dot) a brief pause separates digits [https://github.com/ctyler/ip-info/blob/master/README.md For more information about IP Address reading and IP Address flashing, click here] == Static Configuration ===
If you would like to set a static, non-changing, IP Address on your Raspberry Pi, you will need to modify the "headless" file, adding an IP Address, Gateway, and Netmask, to the file for the configurations to work properly(see samples configs below).
IPADDR=[IP Address of Raspberry Pi]
GATEWAY=[IP Address of router/gateway]
If "RESIZE" is in the "headless" file, the root filesystem will be expanded to the maximum size of the sd card via the service rootfs-resize. If "SWAP"(requires the value in megabytes) exists in the "headless" file, a swap file will be created of the specified size, and then activated.
SWAP=[Size of swap in megabytes]
Below are sample configurations, they may require you to enter valid ip information specific to the network you are running it on. ====Static Configuration(without rootfs resizing or swap creation):====
IPADDR=192.168.1.105
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
====Static Configuration(with rootfs resizing and swap creation):====
IPADDR=192.168.1.105
NETMASK=255.255.255.0
SWAP=512
== Headless Mode DHCP ==Dynamic Configuration -- How do I find my IP Address? (with rootfs resizing and swap creation)==== RESIZE SWAP=512 = SSH to The Headless Pi = Default User: root Default Password: raspberrypi ssh root@{ip_address}
