Changes

Jump to: navigation, search

OPS335 Lab 1

279 bytes removed, 19:11, 4 January 2021
Generating a Public/Private Key Pair & Sharing the Public Key
== OBJECTIVE & PREPARATION==
In OPS235, you learned how to configure a virtual private network for your '''centos1vm1''', '''centos2vm2''' and '''centos3vm3''' virtual machines. You were required to configure a static network connection for your VMs. In OPS335, you will also be setting up a static network connection for all of your VMs (which all VMs will be text-based). All of the services that we install and configure for this course '''require a working network connection'''; therefore, it is very important that you know how to configure a network connection for your VMs, whether via command line for trouble-shooting purposes, or to create a persistent (permanent) network connection that uses static IP address (as opposed to DHCP).
This lab is a <u>review</u> of the material from labs 6 ( [http://zenit.senecac.on.ca/wiki/index.php/OPS235_Lab_6_-_CentOS7#Part_4:_Configuring_VM_Network_Setup_via_Command_Line_.28centos3.29 CLI Network Configuration] ), but will also additional topics.
*[https://www.tty1.net/blog/2010/ifconfig-ip-comparison_en.html ip vs ifconfig]
*[http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch04_:_Simple_Network_Troubleshooting#.VppvTZeVtQI Simple Network Troubleshooting]
*[http://zenit.senecac.on.ca/wiki/index.php/OPS235_Lab_6_-_CentOS7 OPS235 - Lab6]
*[http://zenit.senecac.on.ca/wiki/index.php/OPS235_Lab_7_-_CentOS7 OPS235 - Lab7]
*[https://www.digitalocean.com/community/tutorials/how-to-use-rsync-to-sync-local-and-remote-directories-on-a-vps rsync Howto]
*[https://help.ubuntu.com/community/CronHowto Cron HowTo]
=== Checking Your Current Network Settings ===
In OPS235, you have used the deprecated '''ifconfig''' and '''route''' commands. In this course we'll use the '''ip''' command instead. You may , so that you'll be familiar with the deprecated ifconfig and route both sets of commands, but you are expected to know the newer ip command as well.
<tr> <td>Obtain Hostname</td><th>uname -n</th><th>uname -n</th></tr>
 
<tr> <td>See MAC cache</td><th>arp -n</th><th>ip neighbour</th></tr>
</table>
<ol><li value="2">Run the '''ifconfig''' command on your '''c7hosthost''' machine. Check and record the IPADDR for your default (dhcp) network interface card (possibly eno1) and the virtual bridge.</li><li>Issue the '''ip''' command on your '''c7hosthost''' machine to determine the IPADDR and GATEWAY information (refer to above chart). How are the result similar or different than the ifconfig command?</li><li>Issue the ifconfig command on your VMs. what happened?</li><li>Use the '''ip''' command for your VMs to list the IPADDR and GATEWAY information.</li><li>Refer to the man pages or refer to following article [http://www.tecmint.com/ip-command-examples/ 10 Useful ip Commands] to see how to issue the above commands to create a <u>temporary</u> connection to your existing network.</ol>
=== Making Persistent (Permanent) Network Setting Changes ===
In order to have your network settings become permanent, you need to edit and save the settings changes in a file.
For the IP address, subnet mask, default gateway, and DNS server you edit that file is contained in a directory called: '''network-scripts'''.
'''Perform the following steps:'''
# From Change to the ''network-scripts'' directory (see your ''OPS335''/''OPS235''/''ULI101'' notes, issue a command to provide the full path-name of the directory: ''network-scripts''. If that command or utility does not exist, simply install it).
# The name of the file that contains your persistent network settings has the following name format:<br>'''ifcfg-''interfacename'''''
# Which file-name in your network-scripts directory do you think contains your current network settings?
<ol>
<li value="7">Edit the '''ifcfg-''interfacename''''' (most likely ifcfg-eth0) file for each of your VMs to use a static IP address (refer to previous OPS235 lab on networking: [ [httphttps://zenitwiki.senecaccdot.onsenecacollege.ca/wiki/index.php/OPS235_Lab_6_-_CentOS7OPS235_Lab_6#Part_4Part_3:_Configuring_VM_Network_Setup_via_Command_Line_.28centos328centos3_and_centos2.29 Network Config - CLI] ].<br> You should be configuring the BOOTPROTO ('''static''' instead of dhcp), IPADDR, PREFIX (or NETMASK), GATEWAY, HWADDR, and DNS1 for this file. Note the following information for this setup:<ul><li>Set your IPADDR for each VM with the following rules:<ol type="a"><li>Your IPADDR's third octet will use the last 2 digits in your student number.</li><li> Make certain that the 4th octet for your VMs does not start with '''1''' since that is reserved for the '''GATEWAY''' or '''DNS'''by your host machine.<br>For example, Use the forth recommended fourth octets: '''2 for vm1''', '''3 for vm2''', and '''4 for vm3'''.</li></ol></li><li>Don't forget to set the default gateway and DNS server for your VMs. You can use your host's IP address as a gateway and DNS server<br>(''libvirt'' will proxy the requests to the real DNS server).</li><li> You can refer to your previous lab to obtain information for setup of these options: [ [httphttps://zenitwiki.senecaccdot.onsenecacollege.ca/wiki/index.php/OPS335_Installation_Lab#Configuring_a_VM_host Configuring a VM Host] ]<br><br></li></ul><li>Make note of the files used and entries required and note them in your lab log-book.</li><li>Save your editing session, and then restart each VM and run the following command to ensure they still have the network configuration you set:<ul><li>'''ping''' (what is the purpose of this command?). Try to ping matrix and google from your host machine.<br>Try to ping matrix and google from each of your VM's to ensure you can reach the outside world.</li><li>'''ssh''' (into another server, like Matrix) </li></ul></li><li>After setting the network configuration for EACH VM, then either the the ifdown and ifup commands or reboot each VM, to verify that you can connect to the Internet with the new static IP network configuration. If you cannot connect to the Internet, then check the network configuration file and make corrections until you have a workable network connection for each VM from boot-up.</ol>
# '''IS THE NETWORK ON VM PLUGGED IN?''' On a physical network you would check whether the cable is plugged in and the link light is on on your network card. In a virtual network environment, you don't have a physical network adapter. Instead, you will need to check the NIC settings in the <u>'''virtual'''</u> machine details to view and confirm the appropriate network connection.
# '''IS THE NETWORK ENABLED?''' This is a problem more common with virtual networks than physical networks. Check in your :<br> '''VirtManager'''->'''ConnectionDetails'''->'''VirtualNetworks''' that your network is active.
# '''DO YOU HAVE AN IP ADDRESS?''' Run '''ip address''' to check.
# '''CAN YOU PING THE HOST BY IP?''' (by its internal IP address). If not - check all of the above, check if you have an IP address conflict, and check that your subnet mask is correct.
There are a number of other problems that could prevent your network connection from functioning but the above are the most common problems.
==== "Run Script to Break My Network" script Connection for Troubleshooting ====
You will now download, set execute permissions and run a Bash shell script to try to "break" the network connection for your vm1. This will provide troubleshooting practice to check your network configuration file, look and correct errors and restart your network interface connection.
#Try to temporarily connect to the Internet
#Edit your network settings file to make the changes permanent
#Test your connectivity (including after a reboot of your vm1.)
'''Note:''' You should be able to go through that troubleshooting process pretty quickly. Setting up the network in this course is never a primary task, but it's almost always a prerequisite for anything else we're going to do. You can't have a working web server (or any other kind of server) if you don't have a working network connection.
::* '''systemctl status'''
<ol><li value="2">Launch your '''vm2''' machine, login to the machine, and open a shell terminal.</li><li>Use one of the commands above to check the status of your SSH server (i.e. service: ''sshd'').</li><li>Issue one of the above commands to stop of the ssh server and run a command to verify that the ssh server is no longer running.</li><li>Issue another one of the above commands to start the SSH server and to verify that it is running.</li><li>Issue a command (not listed above) to confirm that the ssh service will run upon when the vm2 server restarts(i.e. "enabled").</li></ol>
===Configuring the SSH Service===
A common (if somewhat blatant ) way) to try to hack into a machine is to try to ssh as '''root''' and brute-force root's password. The root user always exists, meaning the attacker doesn't need to try guessing what user names are on your system. If they can get access to root, they can do anything. To prevent this, we will edit the configuration file for the ssh service to prevent root from ssh'ing into your host machine.
'''Perform the following steps:'''
#Login to your Centos '''host ''' machine for the following steps.
#Use the more command to display '''/etc/ssh/sshd_config''' on your host. This file contains the configuration parameters for the ssh service.
#Take a few moments to view this file. Lines that begin with # are comments. Either simple explanations of parameters, or parameters that have not been set.
#This is because (for most services) the '''changes you make to the configuration file will not take effect until the service restarts'''.
#Restart the sshd service on your host and try to ssh in again. Now it should prevent you.
#The option '''permitRootLoginPermitRootLogin''' for '''all of your VMs''' for both labs and assignments MUST be set to '''yes'''. The reason for this is that you have created a virtual network, so you have protected the host from root login, so you don't have to do the same for your VMs. Also, by allowing root login for your VM's will allow you to automatically backup your VMs to your host machine (via a crontab entry) without being prompted for a root password for each VM.
'''Note: ''' Configuration files for most services follow a very similar format. Some use an = between the parameter and its value, some require you to group certain parameters together, and most use # to be a comment. You will get lots of experience working with the configuration files for services in this course.
=== SSH Key Concepts===
[[Image:ssh_connection_explained.png|thumb|center|600px|A diagram explaining how public / Private keys work. Another term to represent this process is called '''PKI''' (Public/Private Key Infrastructure) ]]
<br />
Put this book on your "must-read" list. You can borrow a copy from the Toronto Public Library. I have yet to see a better introduction to encryption. It's not a reqirement for OPS335 - but if you want to not be clueless about security fundamentals online - read that book and understand it.
 
[[Image:crypto.jpeg|center|"crypto" by Steven Levy]]
=== Generating a Public/Private Key Pair &amp; Sharing the Public Key ===
The public/private key pair needs to be generated on and used on your '''host''' machine (i.e. the user/machine you're connecting '''from'''). The private key is the equivalent of a <u>''password''</u> (that it is why it is considered to be <u>''private''</u> - only to be used by ''<u>one</u>'' owner). That is why the private key is stored in the owner's '''~/.ssh/''' directory.
One very common mistake that students make is to either generate the key pair for the WRONG wrong account, or copy the public key to the WRONG wrong account on the intended remote machine.
'''Perform the following Steps:'''
# Make certain you are in your '''host ''' machine.
# You will be creating a '''key-pair on your host machine with no password''' (i.e. when generating keypair press enter for all prompts including the password).
# You generate Make certain you are logged on as '''root''' on your host machine.# Generate the key-pair by issuing the command:<br><source lang="bash">ssh-keygen -t rsa</source>
'''NOTE:''' When issuing this command, you will end up with the files: '''~/.ssh/id_rsa''' and '''~/.ssssh/id_rsa.pub''' (private and public keys). So far, this topic is generally a repeat of OPS235 lab7. What you may '''<u>not</u>''' know is that by using a '''"trick"''' (the ''magic'' of public key cryptography), you can SSH to a Linux machine without using a password!<br>Learning to perform this trick is <u>'''essential'''</u> in this course and in the industry in general. SSH keys are used everywhere that Linux servers are used.
If you have the private key, you can prove to someone who has your public key that you are indeed the '''actual owner of that public key'''. That is how ssh key authentication works. You are then only required to transfer your public key to a remote server.
<ol><li value="45">You are going to share the public key from the '''root user in your host machine''' with the '''root user of your vm1 machine'''.</li><li>Make certain you are logged on as '''root'''.</li><li>Copy the contents of your '''~/.ssh/id_rsa.pub''' from your host machine, and append the contents to '''~/.ssh/authorized_keys''' on each of your Virtual Machine serversMachines. In your case, you will issue the following command 3 times (for each vm IPADDR):</libr><lisource>Simply issue the Linux command '''ssh-copy-id -i ~/.ssh/id_rsa.pub usernameroot@serverIPADDR_for_vm</source>'''<br><br>In your caseNOTE: ssh-copy-id ''' Press ENTER for all prompted information including the password (although this may seen counter-i ~/.ssh/id_rsaintuitive!).pub root@IPADDR_for_vm1</libr><libr>Make certain to copy the public key for root on your host to your vm2 and vm3 machines as well.</li><li>Use the ssh command to test each ssh connection between your host and each virtual machine that you can connect to the VMs without having to use a password. This is essential to create backups from VMs to your hostmachine without being prompted for password.</li></ol>
When performing labs or assignments in this class, if you fail to make backups and something bad occurs and there is loss of data, it only affects you. On the other hand, if you are supporting a client, or working for a company and fail to adequately perform backups and there is loss of data, then other users are affected by failure to backup essential data.
 
=== Performing Full Backups ===
A full backup represents backing up of all of the files of a computer machine (in our case, a VM). A full backup should be performed at the end of each lab or assignment working session.
In OPS235, you learned to use the command '''gzip''', '''gunzip''', and (plus'''virsh dumpxml''' / '''virsh define''' commands if backing up to external storage device like a usb key) to backup your virtual machines and the '''tar''' command as an archiving tool.We will use the same method to perform a full backup for these labs and assignments.
'''Perform the following steps:'''
#Make certain that your virtual machines are NOT running.
#Make certain that you are logged in as '''root ''' user on your host machine.
#Refer to OPS235 lab2 on backing up your VMs using the '''gzip''' command [https://wiki.cdot.senecacollege.ca/wiki/OPS235_Lab_2_-_CentOS7_-_HD2#Part_1:_Backing_Up_Virtual_Machines OPS235 Lab2 - Backing up VMs]
#Make certain that you have performed a full backup for '''vm1''', '''vm2''', and '''vm3'''.
It is recommended to create a Bash shell script to automate the backing up of ALL your VMs in sequence. You can do this by running a for loop using a list for vm1, vm2, and vm3image file pathnames.
#<ol><li value="5">Create the sub-directory '''/root/bin/'''</li>#<li>You should know how to create full backups of your VMs in your OPS235 course. Create a Bash shell script called :<br>'''/root/bin/fullbackup.bash''' that will backup all of your other vms (i.e. vm1, vm2, and vm3) one at a time using the '''gzip''' command to your host machine into the respective directory path-namesname: '''/backup/full/vm1''', '''/backup/full/vm2''', and '''</backup/full/vm'''li>#<li>Set execute permissions, and run the shell script to verify that you shell script works.</li><li>It is also recommended to backup to your USB key as well (qcow2 images and xml config files).</li></ol>
It will be your responsibility as an administrator of your own Linux system, to backup all of your VMs for labs and assignments at the end of your lab session. Learning to create shell scripts to automate routine tasks (such as backups) will be EXTREMELY useful for your NDD430 course.
 
=== Performing Incremental Backups ===
An incremental backup is a backup of only files that have changed since the last backup. In your case, it may be a good idea to perform incremental backups of your '''/etc/ ''' directory for your VMs upon startup. We will be using the '''rsync''' command to perform incremental backups for all of your VMs.
'''Rsync''' is a very versatile backup tool. As the name suggests, rsync is used for <u>synchronizing</u> files typically across a network. It works over the '''SSH''' protocol, which is useful in our situation since we are running ssh on our server and VMs. You are going to use your ''host machine'' to backup files from the ''virtual machines''.
# On your '''host machine''', run the following commands:
<source lang=bash>mkdir -p /backup/incremental/vm1
rsync -avz 192.168.x.x:/etc /backup/incremental/vm1/ # where 192.168.x.x is the IPADDR of your vm1</source>
<ol><li value="4">If rsync prompts for a password, make certain that you completed the '''SSH key''' section above, and that you assigned the keys for the <u>appropriate user</u><br>(in this case, for the '''root user for both the hostname and vm1'''!)</li><li>When the rsync command runs correctly, you should see all the files from vm1 being copied over to your host machine.</li><li>Run the rsync command again. Notice that the second time nothing is copied over to your host machine since none of the files have changed on your vm1 machine.</li><li>Create a new file in vm1's '''/etc/''' directory, and rerun '''rsync'''. Confirm on your '''host machine''' that only that file that was created on your vm1 machine actually got backed up to your host machine.</li><li>Repeat the above steps to create backups for your '''vm2''' and '''vm3''' machines on your host machine as well (for the respective directories: '''/backup/incremental/vm2''' and '''/backup/incremental/vm3''').</li></ol>
 
=== Automating Backups (cron) ===
'''Cron''' is a ''daemon'' (i.e. a program that runs in the background). The term ''"Cron"'' is short for '''Chronograph''' which was an old fashioned term for a '''stop watch''' or '''timer'''. The role of '''Cron''' is to run tasks periodically. It can run tasks for the system (as root) or for a user (including regular users). Every user has a crontab (Cron Table) which is a list of tasks they want to run periodically. You do not edit this file manually: instead, you edit this table using the command '''crontab -e'''. Once you run the command, you will get an empty file where you have to insert a line like this:
 
 
'''Perform the following steps:'''
# Refer to the following WIKI to learn how to use cron: [[crontab tutorial]]
# In your host machine as root, edit your crontab and enter the line above. Modify modify the setting so it will run that echo command every minute by creating a crontab (via '''crontab -e''') entry with the following line:<br><source>* * * * * echo "Cron ran this job at: "`date` >> /tmp/cron.log</source>
# Save and exit your crontab edit session.
# Wait for one minute to pass, and check the '''/tmp/cron.log''' file to see if it was created with the expected contents.<br>(You can also check '''/var/log/cron''' file to see what jobs were run).
# Edit your crontab entry to run same command every two minutes, save and exit, and then confirm by viewing '''/tmp/cron.log''' and '''/var/log/cron''' files.
# Perform a Net-search to see how to run a cron for a command for every hour.
# Edit your crontab to '''make automatic backups using the rsync command''' of the '''/etc''' directory from '''vm1''', '''vm2''', and '''vm3''' into '''/backup/incremental/vm1''', '''/backup/incremental/vm2''', and '''/backup/incremental/vm3''' every hour and overwrite the previous backup.
'''Record steps, commands, and your observations in INVESTIGATION 2 in your OPS335 lab log-book'''
 
== COMPLETING THE LAB ==
'''Depending on your professor you will either be asked to submit the lab in class, or online. Follow the appropriate set of instructions below.'''
===Online Submission===
Follow the instructions for lab 1 on moodle.
Follow the instructions for lab 1 on blackboard. <!--===In Class SubmissionAndrew's sections===[[ImageYou may choose to:lab1_signoff.png|thumb|right|300px|Students should be prepared with * Submit screenshots of your work on Blackboard, in which case you don'''all required commands (system information) displayed in a terminal (or multiple terminals) prior t need to come to calling the instructor for signoff'''lab.]]'''Arrange evidence (command output) for each of these items on * Or come to the lab, show me your screenwork, then ask your instructor and talk to me about it. I want to review them hear what you've learned and sign off on answer any questions you have. You'll get the same grade regardless of how you choose to submit your work. Expected results of this lab's completionare:'''
::<span style="color:green;font-size:1.5em;">&#x2713;</span> Each of your VMs should now boot to a command prompt (no graphical interface), and should be using a static IP address.
::<span style="color:green;font-size:1.5em;">&#x2713;</span> should be able to ssh from your host to each VM as the root user without a password.
::<span style="color:green;font-size:1.5em;">&#x2713;</span> Display contents of backup script called: '''/root/bin/fullbackup.bash'''
::<span style="color:green;font-size:1.5em;">&#x2713;</span> FULL Full and INCREMENTAL incremental backups of your 3 VMs.
::<span style="color:green;font-size:1.5em;">&#x2713;</span> You have notes in your lab-book about what you've learned in this lab.
::<span style="color:green;font-size:1.5em;">&#x2713;</span> Run a shell script to submit your lab:<br>:::'''Steps:''' :::Issue the following command to download the bash shell script:<br>'''wget http://matrix.senecac.on.ca/~murray.saul/ops335/labcheck_network_backup.sh'''::::*Assign execute permissions, and run the script to check your work: '''labcheck_network_backup.sh'''::::*When prompted for the network interface, use the '''virtual interface'''.-->
== EXPLORATION QUESTIONS ==

Navigation menu