70
edits
Changes
→Accessing the SheevaPlug serial console from a Windows 7 box
# You might need to press ENTER once or twice to get the prompt to actually show (sounds silly but it took me a while to figure that out lol).
# Login using the default authentication information (username = root ) (password = nosoup4u)
= Accessing SheevaPlug serial console from a Linux box =
# Connect the device using the mini USB -> USB cable.
# You will find a new /dev/ttyUSBx device (/dev/ttyUSB0 if there are no other USB serial ports).
# Connect to this port using the cu command(found in the ''uucp'' package):
cu -l ttyUSB0 -s 115200