OSTEP Infrastructure

OSTEP Infrastructure SOP

This page should be used for all OSTEP Infrastructure. Explaining the standard operating procedure of all tools, configuration, and programs.

Pidora Repos

• The Pidora Repositories are hosted at: http://pidora.ca/pidora/

Symbolic Link Setup

Mash Repos

~/pidora-rsync/mash/pidora-18-latest/
├── mash.log
├── pidora-18
│   ├── armhfp
│   └── source
├── pidora-18-rpfr-updates
│   ├── armhfp
│   └── SRPMS
├── pidora-18-rpfr-updates-testing
│   ├── armhfp
│   └── SRPMS
├── pidora-18-updates
│   ├── armhfp
│   └── SRPMS
└── pidora-18-updates-testing
    ├── armhfp
    └── SRPMS

Pidora main repo sym links

~/public_html/pidora/releases/18/packages/
├── armhfp
│   ├── debug -> ~/pidora-rsync/mash/pidora-18-latest/pidora-18/armhfp/debug
│   └── os -> ~/pidora-rsync/mash/pidora-18-latest/pidora-18/armhfp/os
└── source
    └── SRPMS -> ~/pidora-rsync/mash/pidora-18-latest/pidora-18/source/SRPMS

Pidora updates repo sym links

~/public_html/pidora/
├── rpfr-updates
│   ├── 18
│   │   ├── armhfp ->~/pidora-rsync/mash/pidora-18-latest/pidora-18-rpfr-updates/armhfp/
│   │   └── SRPMS ->~/pidora-rsync/mash/pidora-18-latest/pidora-18-rpfr-updates/SRPMS/
│   └── testing
│       └── 18
│           ├── armhfp ->~/pidora-rsync/mash/pidora-18-latest/pidora-18-rpfr-updates-testing/armhfp/
│           └── SRPMS ->~/pidora-rsync/mash/pidora-18-latest/pidora-18-rpfr-updates-testing/SRPMS/
└── updates
    ├── 18
    │   ├── armhfp ->~/pidora-rsync/mash/pidora-18-latest/pidora-18-updates/armhfp/
    │   └── SRPMS -> ~/pidora-rsync/mash/pidora-18-latest/pidora-18-updates/SRPMS/
    └── testing
        └── 18
            ├── armhfp ->~/pidora-rsync/mash/pidora-18-latest/pidora-18-updates-testing/armhfp/
            └── SRPMS ->~/pidora-rsync/mash/pidora-18-latest/pidora-18-updates-testing/SRPMS/

Ansible Builder Configuration Management

Details About Ansible

Ansible allows for remotely managing the configuration of all builders in a simple and efficient way. Ansible works by running a playbook, a playbook is a way to organize plays and run plays. A play is a set of ansible "command" or "modules" that are used on each builder, these modules can: copy files, change permissions, modify files, run commands, run scripts, and much more.

host = japan directory = /etc/ansible hosts file = /etc/ansible/ansible_hosts ansible config = /etc/ansible/ansible.cfg playbook = /etc/ansible/install_builder.yml plays = /etc/ansible/builders_tasks/ builders files = /etc/ansible/builders/

How To Use Ansible

• Log in to japan as root

ssh japan

• Change to the ansible directory

cd /etc/ansible

• Check the status of all hosts connected to ansible
  • The word builders in the command below is specifying an ansible group

ansible -m ping builders

• Copy over all configurations required and start the koji service

ansible-playbook install_builders.yml --verbose

Change Builder Configurations

The best way to edit a play in ansible is to find the ansible module that is needed and read about it. Ansible modules have great documentation and there are tons of them, so many that there is one for every task that needs to be completed.

• The ansible modules can be found here:Ansible Modules

• All builder plays can be found inside /etc/ansible/builders_plays/ on japan.
• Make sure that if a new play is created, it is added into the playbook at /etc/ansible/install_builders.yml on japan

How To Set Up A New Builder

Before adding a builder to ansible, there are a few things that need to be completed.

Network

• Add a hostname to the /etc/hosts file on japan
• Add a hostname to the /etc/ansible/builders/config_files/hosts file on japan

• If it uses DHCP, then link the hostname to a host in /etc/dhcp/dhcpd.conf by specifying the mac address and host name

or

• If the builder has a changing mac address and can't use DHCP, get access to the builder and set the ip manually

ifconfig <interface> <ipaddr> netmask 255.255.255.0 up
route add default gw 192.168.1.254

Services

• Initially change services on the builder, since ansible needs to gain access to the builder there are a few things that need to be done.
• NetworkManager - If it is a static address, stop this service, or if you have already setup DHCP on japan, start network manager

systemctl start NetworkManager

or

systemctl stop NetworkManager

• sshd - Start this service

systemctl start sshd

• firewalld - Stop this service

systemctl stop firewalld

• selinux - Stop selinux for now as it interferes with ansible ssh

setenforce 0

SSHD

• Copy the file /etc/ansible/builder/config_files/authorized_keys from japan to the builder
  • This file contains public keys for users and ansible

scp /etc/ansible/builder/config_files/authorized_keys root@builder:

• Login to the builder

ssh root@builder

• Setup ssh and authorized keys

mkdir .ssh
mv authorized_keys .ssh/
chmod 700 .ssh/
chmod 600 .ssh/authorized_keys

• Ansible should now have access to this builder

Ansible Groups

The following ansible groups are used to change the type of configuration that each builder receives. Once each builder has been added to the groups they should be in, run ansible and each group will get treated slightly differently, configuring all builders.

Group Structure

The following is a structure of groups, this shows parent groups with child groups.

• builders
  • builders_default
    • trimslices
    • arndales
    • cubies
    • specials
  • builders_nfs
  • builders_swap
    • trimslices
  • builders_staticip
    • arndales

The child groups link back to a list of hostnames.

• trimslices
  • tri-1-1
  • tri-1-2
  • tri-1-3
  • tri-1-4
• cubies
  • cub-2-1
  • cub-2-2
• arndales
  • arn-3-1
  • arn-3-2
• specials
  • arm-4-1
  • arm-4-2
  • arm-4-3
  • arm-4-4

builders_default

This group is a default group to for all builders. All builders should be in this group.

builders_nfs

This group is used for nfs configuration. This was previously used on older builders that did not have hard drives and required more building space and speed.

builder_swap

This group will allow for ansible to generate a 4GB swap file on the builders and turn that swap file on. This is primarily used for builders that require more swap than is set up on their swap partitions.

builder_staticip

This group should be used for all builders that require static ip addresses. It will setup the custom ip address based on the resolved hostname inside the /etc/ansible/ansible_hosts file.