Grabbing Workstation Material for Off-Site Printing and Storage

Purpose

The following sequence of steps, outlines how to transfer (or "grab") work from all Computer Lab workstations to the "Teacher" account unto a USB stick for off-site printing and storage.

This computer program was custom-created for the Westminster Computer Lab to make it easier for volunteer instructors to quickly obtain student work...

Procedures for Starting-up Computer Server

NOTE: You are NOT required to power-on Workstations and log into student accounts to "grab" previously completed work on the student accounts...

Start-up the computer server. Log into the Teacher account (on the server). Double-click the "Grab Work" icon that is located on the left-hand side of the Teacher account Desktop. If you are running this application for the first time during the computer session, you will be required to enter a password. If you are prompted for a password, enter the same password that you used to log into the Teacher account. The first dialog box provides a brief purpose of the application. After reading the explanation, click OK or press ENTER to proceed. Another dialog box will ask you to plug in a USB device. You can plug your USB device at the front of the computer server (near the bottom). NOTE: After a few moments, a folder window for your USB device will appear. Take the time to study the name (or label) of your USB device near the top of the folder window. Do NOT close this folder window, but instead minimize it, since you will want to verify the transfer (or "grabbing") of student work when the program is finished. Power on the Red Button located on the Power-bar (below the server cupboard). Locate the Data Display Unit (also referred to as the projector). Press button at top of data display unit to power-on (Wait until amber light stops flashing, Green indicates that project bulb is on). Get wireless keyboard. This wireless keyboard is located on top of the server's CPU in the server cupboard. Power-on the wireless keyboard. Allow a few seconds until you can use the keyboard and touch-pad. Here is a diagram of the wireless keyboard for reference: [ png ] Log into the teacher account.

Step #5 Step #6 Step # Step # Step # Step # Step #

NOTE: You need to take an AVIT Computer Lab Training Session prior to using the Teacher account. Upon completing the AVIT training session, you will be provided a password (along with a “Lab Manual”) for the Teacher account. You are NOT allowed to share this Teacher account password (or "Lab Manual) with any other individual.