NAD810 LAN Setup
End-node Host A / Host B / Host C
- Stop the dhclient
- Host A: IP 10.0.0.1 / MAC xx:xx:xx:xx
- Host B: 10.0.0.2 / MAC
- Host C: 10.0.0.3 / MAC
- Gateway: 10.0.0.254 / MAC1, MAC2
Task 0: collect the MAC addresses on all the machine
Task 1: To find out which network interface on the gateway is connected to the LAN
- boot up and configure end-nodes
- nics=$(/sbin/ifconfig -a | grep eth | awk '{print $1}')
- assign 10.0.0.254 to the first device
- ping host A or host B, or host C
- check for result
- assgin 10.0.0.254 to the second device if the first one failed
Task 2: Configure route(s)
