SYA710 Lab01

SYA710 Lab #1

PART A (Container is a file):

Perform the following steps:

1. Power on your PC and boot up Fedora 8 Test and login as 'joker' with password 'seneca99'.
2. Open a console window and switch to superuser with this command:
   
   su -
   
   
3. Create a regular file (filled with zeros) which will be the container for our file system. Use this command:
   
   dd if=/dev/zero of=fakedisk bs=1024 count=10000
   
   
4. Use the losetup command to associate your file with /dev/loop0 like this:
   
   losetup /dev/loop0 fakedisk
   
   
5. Now create a file system in the container:
   
   mkfs -t ext2 /dev/loop0
   
   
6. Make a directory to be a mount point for the file system:
   
   mkdir /mnt1
   
   
7. Mount the file system:
   
   mount /dev/loop0 /mnt1
   
   
8. Record the output of the following command:
   
   df -Thi /dev/loop0
   
   
9. Unmount the file system
   
   umount /mnt1
   
   
10. Delete the loop device
    
    losetup -d /dev/loop0
    
    
11. Delete the fakedisk file.
    
12. Answer the questions 1 to 4 in PART D, then do PART B.
    

PART B (Container is a partition):

Perform the following steps:

1. Use fdisk to make primary partition #4 of about 1GB size.
   
2. Inform the kernel of the change in the partition table with the command:
   
   partprobe
   
   
3. Make an ext3 file system in the new partition:
   
   mkfs -t ext3 /dev/sda4
   
   
4. Make a new directory (mkdir /mnt1) and mount the file system onto it like this
   
   mount /dev/sda4 /mnt1
   
   
5. Now copy the contents of your /home directory to this new file system like this:
   
   cp -a /home/* /mnt1
   
   
6. Add the following line for your /etc/fstab file
   

   /dev/sda4 	/home 	ext3 	defaults 	1 3

7. Unmount /mnt1
8. Close the console window and logout of joker.
9. Login as root and open a console window.
10. Enter the command
    
    mount -a
    
    
11. Enter the 'df -Thi' command to verify that /dev/sda4 is mounted as /home.
12. Close the console window and logout.
13. Login as joker, open a console window and use the df command to verify that /dev/sda4 is mounted at /home.
14. Answer the rest of the questions in PART D.
    

PART C (Container is a logical volume):

Perform the following steps:

1. Reboot (start with a fresh image) and login to your Fedora 8 Test system as root.
2. Open a shell and use fdisk to create an extended partition of 3GB. This should be partition 4. Also create two logical partitions of sizes 1GB and 2GB respectively.
   
3. So this is what your partition table should look like:

   Device	Size	Type
   /dev/sda1	400M	/boot
   /dev/sda2	5G	/
   /dev/sda3	500M	swap
   /dev/sda4	3G	Extended
   /dev/sda5	1G	Unused
   /dev/sda6	2G	Unused

4. When you are done with partitioning with fdisk, use the partprobe command to inform Linux of your changes.
5. Now initialize the two unused partitions so they will be avialable to LVM.

   	pvcreate /dev/sda5 /dev/sda6

6. Create a volume group with the name of 'seneca' and put physical volume /dev/sda5 into it.

   	vgcreate seneca /dev/sda5

7. Run the 'vgscan' command to verify the previous step worked.
8. Now create a logical volume with name 'home' and a size of 500MB.

   	lvcreate -n home --size 500M seneca

9. This logical volume you created can now be accessed as device '/dev/seneca/home' and can be formatted and mounted just like any other partition.
10. Format this logical partition as ext3 type.

    	mkfs.ext3 /dev/seneca/home

11. We'll now mount this file system on empty directory /mnt.

    	mount /dev/seneca/home /mnt

12. Use the 'df -Ti' command to verify the mount was successful. Save the output, you'll need it for PART D.
    
13. Now use the 'e2label' command to give this partition a label named 'myhome' like this

    	e2label /dev/seneca/home myhome

14. Verify the labeling worked with the command

    	e2label /dev/seneca/home

15. Use the 'lvdisplay' command to view your logical volume.
16. Now move your old /home contents to your new logical volume.

    	mv /home/* /mnt

17. In order to use your new /home directory you'll have to update your /etc/fstab file. You can do this by adding in the following line:

    	LABEL=myhome          /home                   ext3    defaults        1 3

18. Unmount /mnt and then remount all file systems listed in /etc/fstab with the command
    

    	mount -a

19. Again record the output of the 'df -Ti' command which you will need for PART B.
    
20. You should now be able to logout of root and login as joker. If this was successful, you can go on to the next step, otherwise you have a problem which must be fixed first, so see your teacher or lab tutor for assistance.
21. As joker open a BASH shell and switch to root with the command

    	su -

22. Now we'll increase the size of our home directory by first adding the second unused partition, /dev/sda6, to the volume group like this

    	vgextend seneca /dev/sda6

23. Ok, our volume group has two physical volumes in it and therefore is larger, so we can now expand by 1 GB our logical volume, home, with this command

    	lvextend -L+1G /dev/seneca/home

24. So now our 'home' logical volume should be about 1.5GB. However, if you use the 'df' command you'll see that nothing has changed - the size of our home directory is still 500MB. So now we need to resize the ext3 file system to fill all the space of the logical volume. We can do this with the command

    	resize2fs /dev/seneca/home

25. Once again record the output of the 'df -Ti' command.