ICT USB Sticks

Download Install Disk Image

1. You'll need an ADATA UV128/32GB USB stick. You can use a different one but it has to be at least 31,037,849,600 bytes in size. A USB3 stick is highly recommended, even if you're using it in a USB2 port (the flash inside is faster).
2. The process of downloading, extracting, and writing the image may take a long time depending on the speed of your network, computer, and USB port.
3. Once you have the stick, insert it into your computer, preferably into a USB3 port (it's either blue in colour or has SS writen on it, short for SuperSpeed).
4. Download the compressed image from here:
   • asd
5. Then unzip it. You'll obviously need enough disk space for that, a total of probably 36GB (one compressed + one uncompressed file).
6. Write the image to your USB stick:
   • If you're currently using linux - you can use the dd command to write to the USB stick. Make sure you write to the device file (e.g. /dev/sdb) and not any existing partition (e.g. /dev/sdb1). You'll need root permissions to be able to write to that device file.
     • e.g. dd bs=4K if=linuxmint-17.1-cinnamon-64bit-seneca-ict-2014-v1.adata32.img of=/dev/sdb
   • On windows you'll need to use Win32 Disk Imager. It's a free program.
     • 
7. Once it's done writing - it's ready to use!

Problems

Please go to bugzilla to see existing problems and file new ones. Or if you can't be bothered to register there, send Andrew and email.