1,885
edits
Changes
Created page with 'Category:Winter 2016 SPO600 == Overview == The Winter 2016 SPO600 Project consists of: * Phase 1: Identifying a Possible Place for Optimization in a compression or check…'
[[Category:Winter 2016 SPO600]]
== Overview ==
The Winter 2016 [[SPO600]] Project consists of:
* Phase 1: Identifying a Possible Place for Optimization in a compression or checksum tool
* Phase 2: Optimizing
* Phase 3: Committing the Changes Upstream
== Phase 1: Identifying a Possible Optimization ==
In this first phase, you will find a possible place for optimization and performance improvement in a compression or checksum tool on Aarch64 systems. This improvement must not cause incorrect behaviour on any platform, and must not reduce performance on other platforms (particularly, on x86_64) Ideally, it should improve performance on multiple (or all) platforms. Note that the ''improvement'' may be a reduction in execution time, memory consumption, both, or through improved utilization of some other resource.
To find possible places for improvement, you may want to use one or more of these techniques:
* Look for platform-specific code used for optimization where no platform-specific code has been provided for Aarch64 (also known as ARM64) platforms. For example, you may find that assembler or runtime CPU feature detection exists in a particular software package when used on a particular architecture(s), but that general C fallback routines are used on other platforms, including Aarch64.
* Use profiling to find functions that take more time than expected, or which take much longer on Aarch64 than on x86_64.
* Examine build instructions to find code that is being compiled with very generic build options, and where specifying a better set of optimizations
You can perform optimization in one of three ways:
* Replace an algorithm with a more efficient algorithm.
* Add additional Aarch64-specific optimizations, where other architectures already have architecture-specific performance code in place.
* Change the build instructions (e.g., compiler options in the Makefile) to build the software with better optimization.
=== Deliverables for Phase 1 ===
Recorded in one or more blog posts:
* The compression or checksum package you are examining, selected from the list on the [[Winter 2016 SPO600 Participants|participants page]] where you will be performing your work. When you select this package, do some analysis to make sure it's a sane choice (e.g., written in a language you can work with, source is available, and the source compiles and runs on AArch64).
* The reason(s) that you have selected this package.
* The place in the software package where you will be applying your optimization(s), e.g., the specific function, method, or portion of the code base you will be working with.
* Baseline benchmarks (and/or profiling), including the methodology used to obtain those baseline results, with sufficient detail that someone else could reproduce your results. This baseline data will be used to gauge the effectiveness of your optimizations later. You'll need to benchmark the baseline performance on both AArch64 and x86_64 systems.
* A clear plan for how you will proceed with the project.
* The details of the upstream community to which you will be contributing your changes. Include the details of the patch revision process used by that community.
== Phase 2: Optimizing ==
Optimize the software identified in Phase 1.
* Prove that your changes improve performance on Aarch64 in a significant and useful way.
* Quantify the improvement.
* Prove that the changes you have made do not cause regressions in the software (e.g., slower performance, more memory usage, incorrect operation, crashes, and so forth) on either architecture. Use the test suite provided by upstream, if there is one.
* Submit your change to the upstream community. Ensure that your patches are formatted correctly, properly documented, and submitted in accordance with the community's requirements and procedures.
=== Deliverables for Phase 2 ===
Recorded in one or more blog posts:
* The details of the change(s) you are making to the software. Describe the changes and the reason for them, and link to an appropriate form of the changes (e.g., a git repository).
* Your test results quantifying the improvement. Be methodical and present the information in an appropriate and convincing way.
* Regression test results.
* A link showing that you have submitted the changes upstream -- e.g., a bugzilla issue, mailing list archive entry, or GitHub pull request.
== Phase 3: Committing the Changes Upstream ==
Ensure that the changes you have made are accepted upstream. Respond appropriately to any requests from the upstream community and maintainers for additional information, clarification, documentation, and code or formatting changes.
Many communities may respond slowly to patches, especially from new contributors. Be patient, but do not let your changes linger; contact the upstream maintainers, develop a good working relationship, and shepherd your patches through the review process.
=== Deliverables for Phase 3 ===
Recorded in one or more blog posts:
* The details of the interactions with the upstream community/maintainers. It would be a good idea to blog separately about each contact.
* A link showing that the changes were accepted.
== FAQ ==
* '''Q: What if I can't improve performance?'''
** A: You may have selected your area of focus poorly, or be using the wrong approach to optimization. Try alternate approaches.
* '''Q: What if, after trying alternate approaches to optimization, I still can't improve performance?'''
** A: You can complete the project by proving that the code and build instructions, as provided by upstream, cannot be further optimized. Note that in most cases this is '''much''' harder to do that to optimize some portion of the stack.
* '''Q: What if upstream is slow to respond to my patches?'''
** A: Contact the upstream community/maintainers to request that they review and/or commit your changes. Provide everything possible to make it easy for them to accept your changes, including regression tests and benchmarks.
* '''Q: What are the due dates for this project?'''
** A: See the [[Winter 2016 SPO600 Weekly Schedule]].
== Overview ==
The Winter 2016 [[SPO600]] Project consists of:
* Phase 1: Identifying a Possible Place for Optimization in a compression or checksum tool
* Phase 2: Optimizing
* Phase 3: Committing the Changes Upstream
== Phase 1: Identifying a Possible Optimization ==
In this first phase, you will find a possible place for optimization and performance improvement in a compression or checksum tool on Aarch64 systems. This improvement must not cause incorrect behaviour on any platform, and must not reduce performance on other platforms (particularly, on x86_64) Ideally, it should improve performance on multiple (or all) platforms. Note that the ''improvement'' may be a reduction in execution time, memory consumption, both, or through improved utilization of some other resource.
To find possible places for improvement, you may want to use one or more of these techniques:
* Look for platform-specific code used for optimization where no platform-specific code has been provided for Aarch64 (also known as ARM64) platforms. For example, you may find that assembler or runtime CPU feature detection exists in a particular software package when used on a particular architecture(s), but that general C fallback routines are used on other platforms, including Aarch64.
* Use profiling to find functions that take more time than expected, or which take much longer on Aarch64 than on x86_64.
* Examine build instructions to find code that is being compiled with very generic build options, and where specifying a better set of optimizations
You can perform optimization in one of three ways:
* Replace an algorithm with a more efficient algorithm.
* Add additional Aarch64-specific optimizations, where other architectures already have architecture-specific performance code in place.
* Change the build instructions (e.g., compiler options in the Makefile) to build the software with better optimization.
=== Deliverables for Phase 1 ===
Recorded in one or more blog posts:
* The compression or checksum package you are examining, selected from the list on the [[Winter 2016 SPO600 Participants|participants page]] where you will be performing your work. When you select this package, do some analysis to make sure it's a sane choice (e.g., written in a language you can work with, source is available, and the source compiles and runs on AArch64).
* The reason(s) that you have selected this package.
* The place in the software package where you will be applying your optimization(s), e.g., the specific function, method, or portion of the code base you will be working with.
* Baseline benchmarks (and/or profiling), including the methodology used to obtain those baseline results, with sufficient detail that someone else could reproduce your results. This baseline data will be used to gauge the effectiveness of your optimizations later. You'll need to benchmark the baseline performance on both AArch64 and x86_64 systems.
* A clear plan for how you will proceed with the project.
* The details of the upstream community to which you will be contributing your changes. Include the details of the patch revision process used by that community.
== Phase 2: Optimizing ==
Optimize the software identified in Phase 1.
* Prove that your changes improve performance on Aarch64 in a significant and useful way.
* Quantify the improvement.
* Prove that the changes you have made do not cause regressions in the software (e.g., slower performance, more memory usage, incorrect operation, crashes, and so forth) on either architecture. Use the test suite provided by upstream, if there is one.
* Submit your change to the upstream community. Ensure that your patches are formatted correctly, properly documented, and submitted in accordance with the community's requirements and procedures.
=== Deliverables for Phase 2 ===
Recorded in one or more blog posts:
* The details of the change(s) you are making to the software. Describe the changes and the reason for them, and link to an appropriate form of the changes (e.g., a git repository).
* Your test results quantifying the improvement. Be methodical and present the information in an appropriate and convincing way.
* Regression test results.
* A link showing that you have submitted the changes upstream -- e.g., a bugzilla issue, mailing list archive entry, or GitHub pull request.
== Phase 3: Committing the Changes Upstream ==
Ensure that the changes you have made are accepted upstream. Respond appropriately to any requests from the upstream community and maintainers for additional information, clarification, documentation, and code or formatting changes.
Many communities may respond slowly to patches, especially from new contributors. Be patient, but do not let your changes linger; contact the upstream maintainers, develop a good working relationship, and shepherd your patches through the review process.
=== Deliverables for Phase 3 ===
Recorded in one or more blog posts:
* The details of the interactions with the upstream community/maintainers. It would be a good idea to blog separately about each contact.
* A link showing that the changes were accepted.
== FAQ ==
* '''Q: What if I can't improve performance?'''
** A: You may have selected your area of focus poorly, or be using the wrong approach to optimization. Try alternate approaches.
* '''Q: What if, after trying alternate approaches to optimization, I still can't improve performance?'''
** A: You can complete the project by proving that the code and build instructions, as provided by upstream, cannot be further optimized. Note that in most cases this is '''much''' harder to do that to optimize some portion of the stack.
* '''Q: What if upstream is slow to respond to my patches?'''
** A: Contact the upstream community/maintainers to request that they review and/or commit your changes. Provide everything possible to make it easy for them to accept your changes, including regression tests and benchmarks.
* '''Q: What are the due dates for this project?'''
** A: See the [[Winter 2016 SPO600 Weekly Schedule]].