1
edit
Changes
no edit summary
[[Image:Acs32.png|thumb|widthpx| ]]
Testing of the Cyclades ACS32 involved crossing the RX and TX of two [DB9 to RJ45] converters ([which are in turn connected to cat5 via CAT5 (or better) cables between the converter and the port on the Cyclades)]. This is done by connecting pin 2 of connector A to pin 3 of connector 3B, and vice versa.
The ports on the Cyclades are then configured to accept SSH connection, and enabled.
Make sure the ports are assigned the correct privilege user/group to connect to them, and ssh to them in the fashion shown on the enclosed PNGto the right -> .
Result: What you type in the SSH connection of one session, should appear on the ssh session of the corresponding port connected by the crossover cable. After testing that all ports can transmit and receive properly, one can conclude that the ports seem to be in working order.