1
edit
Changes
Created page with 'Category:Fedora ARM Meeting CDOT Fedora ARM Team 2012-05-09 = Updates = * agreene: bconoboy's nightly setup is configured/tested/communicated to blc. '''(agreene to follow…'
[[Category:Fedora ARM Meeting]]
CDOT Fedora ARM Team
2012-05-09
= Updates =
* agreene: bconoboy's nightly setup is configured/tested/communicated to blc. '''(agreene to follow up)'''
* backup from chile to romania is set up, host keys present an error '''(maxam)'''
* IRCC announcement went out yesterday afternoon
* pwhalen has autoqa set up on Japan, will be using two builders remotely
= OCE Discovery =
* Raspi+40"+22" screen
* Need some 3D demos
* Need handout
* Test+practice on Thu/Fri
= Disk Upgrades for Chile =
* Plan for Friday afternoon - start at noon EDT - 1700 UTC
* Disable builders at ~ 11:30 am EDT
* Tell the list about the downtime '''(ctyler)'''
* Affected services:
** armpkgs.fedoraproject.org
** Koji buildsystem - hub
* Upgrade plan:
*# Add 3TB disk + 600GB SSD + PCIe SATA controller
*# Stop + remove md6 array
*# Add SSD to md1 array
*# Remove /dev/sdf1 from md6 array
*# Add /dev/sdX to new RAID1 array (replacing old md6)
*# Adjust /etc/mdadm.conf
*# Adjust dracut - insert new /etc/mdadm.conf
*# Reboot to test
# Use fdisk to partition the new SSD and disk
mdadm --stop /dev/md6
mdadm --stop /dev/md2
mdadm /dev/md1 --grow -l 0 -n 4 -a /dev/sdX1 # sdX1 is the 600GB SSD
mdadm --stop /dev/md6 # needed? check for other device numbers too?
fdisk -l /dev/md1
mdadm --create /dev/md6 -n 2 -l 1 /dev/md1 -W /dev/sdZ1 # sdZ1 is the 3TB mechanical disk
* For dracut, add the --mdadmconf option
= Raspi =
* Firstboot - '''(frojoe)'''
* Waterbear - needs testing on Pi '''(agreene)''', in review '''(ctyler)'''
* Scratch - needs new spec '''(maxam)'''
* Kidsruby + Rubywarrior - needs changes to spec file '''(fossjon)'''
* Kernels - need testing '''(ctyler)'''
= Goals and Action Points =
* Waterbear - re-review by Friday '''(ctyler)'''
* Kidsruby - ready for re-review by Friday '''(fossjon)'''
* Chile backup - working by Thursday night '''(maxam)'''
* Scratch - packaged by Friday '''(maxam)''' (could be submitted for review next week)
* Kernels - test 4x kernels by Friday '''(ctyler)'''
* Firstboot - forked/patched packages by Friday '''(frojoe)'''
* Oscar and Felix - ???
* Posted to the wiki '''(agreene)'''
= Supplies =
* HDMI splitter +
* Ethernet cables
* PSU for Felix
* Shelf liners
* Lucite box for raspi
= Notes on Using GIT to Create a Patch =
git init
git add *
git commit -a -m "Initial commit"
(make some changes)
git commit -a -m "Some useful changelog message"
git log --oneline
git format-patch HEAD^1
In the spec file in the preamble:
Patch0: name-of-file.patch
In the spec file in the %prep:
%patch0 -p1
CDOT Fedora ARM Team
2012-05-09
= Updates =
* agreene: bconoboy's nightly setup is configured/tested/communicated to blc. '''(agreene to follow up)'''
* backup from chile to romania is set up, host keys present an error '''(maxam)'''
* IRCC announcement went out yesterday afternoon
* pwhalen has autoqa set up on Japan, will be using two builders remotely
= OCE Discovery =
* Raspi+40"+22" screen
* Need some 3D demos
* Need handout
* Test+practice on Thu/Fri
= Disk Upgrades for Chile =
* Plan for Friday afternoon - start at noon EDT - 1700 UTC
* Disable builders at ~ 11:30 am EDT
* Tell the list about the downtime '''(ctyler)'''
* Affected services:
** armpkgs.fedoraproject.org
** Koji buildsystem - hub
* Upgrade plan:
*# Add 3TB disk + 600GB SSD + PCIe SATA controller
*# Stop + remove md6 array
*# Add SSD to md1 array
*# Remove /dev/sdf1 from md6 array
*# Add /dev/sdX to new RAID1 array (replacing old md6)
*# Adjust /etc/mdadm.conf
*# Adjust dracut - insert new /etc/mdadm.conf
*# Reboot to test
# Use fdisk to partition the new SSD and disk
mdadm --stop /dev/md6
mdadm --stop /dev/md2
mdadm /dev/md1 --grow -l 0 -n 4 -a /dev/sdX1 # sdX1 is the 600GB SSD
mdadm --stop /dev/md6 # needed? check for other device numbers too?
fdisk -l /dev/md1
mdadm --create /dev/md6 -n 2 -l 1 /dev/md1 -W /dev/sdZ1 # sdZ1 is the 3TB mechanical disk
* For dracut, add the --mdadmconf option
= Raspi =
* Firstboot - '''(frojoe)'''
* Waterbear - needs testing on Pi '''(agreene)''', in review '''(ctyler)'''
* Scratch - needs new spec '''(maxam)'''
* Kidsruby + Rubywarrior - needs changes to spec file '''(fossjon)'''
* Kernels - need testing '''(ctyler)'''
= Goals and Action Points =
* Waterbear - re-review by Friday '''(ctyler)'''
* Kidsruby - ready for re-review by Friday '''(fossjon)'''
* Chile backup - working by Thursday night '''(maxam)'''
* Scratch - packaged by Friday '''(maxam)''' (could be submitted for review next week)
* Kernels - test 4x kernels by Friday '''(ctyler)'''
* Firstboot - forked/patched packages by Friday '''(frojoe)'''
* Oscar and Felix - ???
* Posted to the wiki '''(agreene)'''
= Supplies =
* HDMI splitter +
* Ethernet cables
* PSU for Felix
* Shelf liners
* Lucite box for raspi
= Notes on Using GIT to Create a Patch =
git init
git add *
git commit -a -m "Initial commit"
(make some changes)
git commit -a -m "Some useful changelog message"
git log --oneline
git format-patch HEAD^1
In the spec file in the preamble:
Patch0: name-of-file.patch
In the spec file in the %prep:
%patch0 -p1