[http://svnbook.red-bean.com/ svn (Subversion)] is a source code repository. It is a program capable of storing the source code of a project and can keep track of all the changes made (contributions) to a project by its developers. We use it to keep track of changes to our source code.

svn can* Stores Store your work (source code) safely on a remote server so you will never lose your that work.* Lets Let several students work on the same project at the same time.* Keeps track Track the history of all the work done with history (who have done did what, and when), this . This means that you can:*: undo your work to any of the past stages of the workstage.*: look at different stages of the work and see all compare the changes.*: check other team members' work, their progress , and their contribution.*: ask others for help from others to help you with your work and help others with their work.* to be continuedSubmit a paper-less assignment.*: Once you have tagged your work, your professor can*:# checkout and evaluate your work*:# mark your assignment fairly seeing each student's contribution.*:# help you with your assignment by commenting and correcting your work remotely.

# Create a directory to hold all of your team's work# Checkout the entire repository into that directory#: Look and make sure that you have the 3 directories (branches, tags, trunk)# Open the branches directory and create a sub-directory using your login name#: this becomes the root of your own (each students') workspace#: ''' note: do not use the operating system's file management to copy, move, etc any of the '''''versioned''''' files# Update the whole repo to see all of the changes from all team members# Branch the trunk into a sub-dir of your workspace (name this sub-dir with your assigned task)#: the verb branch means copy (in the repository)You are good to go - you can start working on your task ==start Start working on a project(start a new task)== ==Start # If you have not already branched trunk:#: branch/tag trunk into a sub-directory under your workspace. Use your task name/description so you can refer to it easily later.# do your work within your branch/task directory and commit anytime you have something worth committing. Make sure that you comment each commit. #: '''Note that in your branch you can commit your work even if it is incomplete. In fact, commit your work anytime you are leaving your computer and comment it like: "going for lunch". But again you should only do this when you are working in '''''YOUR OWN BRANCH''''' # When your task==is complete ## Update the repository to apply all of the changes to your local copy## Merge your changes back to trunk #: Note that, the merging happens on the local copy and not the repository # Edit possible conflicts, save and mark them as resolved when done.# Compile the trunk, test and make sure that the changes are what you want# In trunk, apply more changes and do debugging if needed.#: note that this is the only time you should be doing any work in trunk# When everything is perfect prepare to commit the trunk:## Make sure that you are logged in to IRC.## Go to team page and set trunk's status to committing with following info: User ID, email, IRC Nick, time and date## If trunk's status is already committing by another user, communicate with them and find out when they are going to be done so you can do your commit.##: ''Never commit to trunk with out checking and setting the status of trunk in your team page''## Update the repository# Commit the trunk# Edit, save and resolve possible conflicts and go to previous step# When done, go to the team page and set trunk's status back to committed with the same info as before. ==Continue working on a your current task on a new computer(public computer)==# Checkout only your branch/task# Work on your task and keep committing the changes as you go.# When done, do final commit, noting that the work period is done# Delete the checked-out directory from the public computer.# '''''Reboot the computer'''''#: this will remove your userid and password if you chose to save them.#: Note that you are responsible to keep you work safe. If someone gains access to your code and repository, YOU are responsible for it and its consequences. ==Continue working on a your task (everyday work)==# Update the repository to get the most recent changes.# (optional and only if needed:) If trunk is updated by someone else since the time you branched it, you can merge the '''updated''' trunk into your branch to get the latest additions and modifications of trunk in your branch.# Continue working on your task and keep committing often.# when done for the time being, commit your work and comment, noting the stage of your work. ==Release your completed task (submit an assignment or a release)==# Do this when a major task is finished and it is time to present it to your professor.#: This is not necessarily to hand in a new release. It could be at any time you feel you are one step closer to the end of the project.# Update and make sure the trunk has the latest modifications.# Do all possible changes and fixes to make this release final.# Tag (branch) the trunk into a sub-directory in '''tags'''. #: Name the tagged directory relative to its state (i.e. name it '''R0.4''' and comment it with task name '''Text Editor''')#: If this is a fix to a previously released trunk, add the release revision after the release number: (i.e R0.41 and comment it as '''Fixed backspace bug in Text Editor''') # Your prof will later update the repo on their computer and get your Release. 

=Svn == Directory Structure ===<big><pre>|-- Team_Repository_Account +--branches | +-- member-id1 <-- this is a team member's home within branches | +-- Task1 | +-- Task2 | +-- member-id2 <-- this is a team member's home within branches | +-- Task1 | +-- Task2 | +-- Task3 | +-- member-id3 <-- this is a team member's home within branches | +-- Task1 +--tags | +-- R0.1 | +-- R0.11 | +-- R0.2 | +-- R0.21 | +-- ... | +-- R0.5 | +-- ... | +-- R1.0 | +-- R1.1 | +-- R1.2 | +-- R1.21 +--trunk</pre></big> ==== branches ====* '''branches''' is the common directory for all team members' workspaces. * Each team member should create within '''branches''' their own home directory or '''workspace''' (member-id1, member-id2,...) for their own tasks. * Each team member should divide their '''workspace''' into several sub-directories (workspaces) during the development of the project. These workspaces (Task1, Task2, ...) are usually copies of the '''trunk''' to be worked on.*: ''These sub-directories (Task1, Task2,...) are called branches of trunk. The word '''branch''' used as a verb means copying the whole '''trunk''' into a sub-directory, within '''branches'''. ==== tags ====* '''tags''' is the directory that holds '''copies''' of successful stages of '''trunk''' throughout the development of the project. (''Also called as '''milestones''''')* '''tags''' are never modified or edited. ''You may branch a directory of tag into branches under a workspace and then modify the branch and apply the changes back to trunk, but you should never change the contents of a tag''*: The verb '''tag''' means copy the whole trunk into a sub-directory, in '''tags'''.* The action of '''tag'''ing the trunk into '''tags''' is referred to as a '''release'''.* We use the '''tags''' directory to submit the work for marking. ''Your instructor will specify the requirements of a release.''** A release is usually tagged by a version number like: R0.1, Prj0.2, As1_1.0 ** When a release is due, your instructor will always mark the latest version of that release. **: ''If R0.3 is due, and R0.3, R0.31, R0.32 are present in '''tags''', then your instructor will mark R0.32 ==== trunk ====* '''trunk''' is the directory that holds the project in its current stage, '''complied and run-able'''* '''trunk''' should never hold non-compiled code. Usually trunk is an exact copy (or better than) the latest version in '''tags'''.* If the repository only contains one project, then trunk has no project level sub-directory and is the root of the project. If the repository holds more than one project, trunk is divided into several sub-directories - one for each project.*: ''In this case, we divide '''tags''' into exactly the same project sub-directories as in '''trunk''''' =svn basic commands=A few important facts and terminology to clarify basic actions:* The purpose of a code repository is to track all of the modifications done to a project by its team members. **In a project tracked by a code repository (version-controlled, or in short, versioned), you can focus on any change during the project's development life; such as, who modified/added/deleted what and when. You can undo work or rollback the work to any development stage.* SVN is a client/server repository;** Code resides on a server and members who have access can copy the whole or parts of the code to their local machines, work on the whole or parts and then apply their changes back to the server.** Because the code resides on a server, one member may be unaware of the changes made by another, unless the other has applied the changes to the server and the member has updated their local copy. ** That is why timely and frequent communication amongst team members is vital to the project's success. This is easily accomplished through the project wiki page (team page) and IRC* A code repository manages the merging of modifications of different members' code. When this fails, the repository will be in a conflict state.** Conflicts can be easily edited, saved, and resolved using the tools provided by SVN.* A '''version-controlled or versioned''' file is a file that is being tracked by a repository.<hr>* If the userid and password are not set to be saved in svn, then you need to add<big><pre> --username stdId --password stpassword</pre></big>: to the end if each svn command. (userid and password '''are''' set to be saved by default. Make sure to reboot your lab computer for the userid and password to be erased)   == checkout ==To '''checkout''' is to download the code from a repository server as a whole or partially to a versioned directory on the client, so that you can start working on the code.*GUI: # Create a directory on your local machine# Right click on the directory and select '''SVN Checkout'''# Enter the path of the repository or a sub-directory inside the repository and click OK# Enter userid and password if needed*Command Line:<big><pre>svn co svn://zenit.senecac.on.ca/repoid local_directory --username stdId --password stpasswordORsvn checkout svn://zenit.senecac.on.ca/repoid local_directory --username stdId --password stpassword</pre></big> == commit ==To '''commit''' is to submit the changes in the local files to the repository (on the server)* GUI# Right click on the directory or file that you wish to commit and click on '''SVN Commit''' # In the Commit Dialog box enter a short description (a few words) explaining what you have modified and are committing and then click on OK.* Command Line<big><pre>svn commit locdir\branches\stdId\SomeDirectory -m "Added comments to foo() in faa.cpp and fee() in boo.h"</pre></big>OR<big><pre>svn commit locdir\branches\stdId\SomeDirectory\somefile.cpp -m "Added comments to foo() is somefile.cpp"</pre></big>'''''IMPORTANT: committing as often as you can makes you visible and shows that you are actively working on your project. When working on your branch, commit as often as you save your work, and comment your commits as much as you can. A consistent and regular number of commits per week is the best demonstration of your commitment to your project.''''' == update ==To '''update''' is to download and apply the modifications made by others to the repository (on the server) to the local files on your own computer* GUI: Right click on the directory or file that you want to update and click on "SVN update"* Command Line: while in the local directory <big><pre>svn update</pre></big>: OR from anywhere<big><pre>svn update LocalDirectoryPath</pre></big>: OR for a single file<big><pre>svn update LocalDirectoryPath/somefile.whatever</pre></big> == branch/tag ==To '''branch''' or to '''tag''' is to copy one directory into another on the server. The purpose of the copying dictates calling this action either a '''branch''' or a '''tag'''.*To '''branch''' is to '''copy''' into the '''branches''' directory or one of its sub-directories for further development*To '''tag''' is to '''copy''' into the '''tag''' directory as a release of the next stage of your project (also called a milestone)*GUI, Branching # Right click on '''trunk''' in your local repository files and under the "TortoiseSVN" sub-menu click on "Branch/tag"# Click on the button at right side of '''To URL''' to browse and find your '''workspace''' under '''branches''' directory (e.g. ''svn://zenit.senecac.on.ca/oop344_113repXX/branches/stdId'') and select that '''workspace'''.# Add the task name to the end of the selected path: ''svn://zenit.senecac.on.ca/oop344_113repXX/branches/stdId/'''nameOfTask'''''# In '''Log message''' type ''"Branching to do nameOfTask"''# Leave the rest of the options as they are and click on OK.#: This will make a copy of trunk within '''workspace/nameOfTask''' on the server.*GUI, Tagging# Right click on '''trunk''' in your local repository files and under the "TortoiseSVN" sub-menu click on "Branch/tag"# Click on the button at right side of '''To URL''' to browse and find your the '''tags''' directory (e.g. ''svn://zenit.senecac.on.ca/oop344_113repXX/tags'') and select that '''workspace'''.# Add the tag name (usually a release id like R0.6) to the end of the selected path: ''svn://zenit.senecac.on.ca/oop344_113repXX/tags/'''R0.X'''''# In '''Log message''' type ''"Tagging release whatever"''# Leave the rest of the options as they are and click on OK.#: This will make a copy of trunk within '''tags/R0.X''' on the server.* Command Line, Branching<big><pre>svn copy svn://zenit.senecac.on.ca/oop344_113repXX/trunk svn://zenit.senecac.on.ca/oop344_113repXX/branches/stdId/nameOfTask -m "Branching to work on nameOfTask"</pre></big>: This type of branching is called a [http://svnbook.red-bean.com/en/1.5/svn-book.html#svn.branchmerge.commonpatterns.feature Feature Branch]* Command Line, Tagging<big><pre>svn copy svn://zenit.senecac.on.ca/oop344_113repXX/trunk svn://zenit.senecac.on.ca/oop344_113repXX/tags/R0.6 -m "R0.6 is released"</pre></big>'''''Note that branching or tagging occurs on the server. Therefore to have this action applied to your local copy, you need to update your repository (for this see [[#update|Update]]) == merge ==To '''merge''' is to integrate the changes made in a branch in the '''branches''' directory back in the '''trunk''' directory.*GUI# First [[#update|Update]] the whole repository.# Right click on '''trunk''' and then in '''TortoiseSVN''' sub-menu click on '''merge'''# In merge options, select the second one that is '''Reintegrate a branch''' and click on next# In '''From Url''' browse and find the sub-directory under '''branches''' with your completed task and then click on Next. (e.g. svn://zenit.senecac.on.ca/oop344_113repXX/branches/stdId/nameOfTask)#: If browsing is not available you can use the '''repo browser''' to find the path to the sub-directory and copy and paste it.# Before merging you can click on test merge to run a simulation and see if the merge succeeds# Click on merge to merge the branch back into trunk. #: note that merging occurs on your local copy of the code and not in the repository on the server# Edit and resolve possible conflicts# Compile and test the merged trunk# Communicate with other team members to make sure that no one else is committing to trunk.# '''[[#commit|Commit]]''' your changes to trunk # Notify other team members that you have finished your commit!*Command line#Follow all the precautionary steps stated above and then:<big><pre>cd locdirsvn update cd trunksvn merge --reintegrate svn://zenit.senecac.on.ca/oop344_113repXX/branches/stdId/nameOfTask -m "merging back nameOfTask to trunk"</pre></big># Compile and test the trunk<big><pre>svn commit -m "committing work done on nameOfTask"</pre></big> =Resources=== Demo ==* Here is a [http://www.youtube.com/watch?v=ANFTtpGSOgM video demonstration] for using svn, thanks to [[User:Tvirutthasalam|Thevakaran Virutthasalam]]== Links ==* [http://subversion.tigris.org/ Subversion (SVN)]* [http://subversion.apache.org/packages.html Subversion (SVN) Binary Packages]* [http://tortoisesvn.net/downloads Download Page of TortoiseSVN]* [http://tortoisesvn.net/docs/release/TortoiseSVN_en/index.html TortoiseSVN Documentation]* [http://svnbook.red-bean.com/ SVN book at red-bean.com] or download [https://cs.senecac.on.ca/~fardad.soleimanloo/oop344/notes/svn-book.pdf the PDF from here].* [http://www.rapidsvn.org/download/release/0.12/RapidSVN-0.12.0-8051.dmg RapidSVN] a SVN Client for Mac* [http://ankhsvn.open.collab.net/ AnkhSVN - Free Visual Studio SVN Integration Alternative To VisualSVN]