=== Steps to Perform a Fresh Install ===Create an administrator accountmplet

# Make certain computer system is '''connected ''' to the Internet, and peripherals.# Make certain that Edubuntu installation DVD is placed in the CD/DVD drive, and '''boot-up the machine'''.<br />'''Note:''' The current server is configured to boot-up from the CD/DVD drive. If you are installing on a new system, you need to have system boot-up from CD/DVD drive (either by selecting BOOT menu, or configuring BIOS settings).# Upon boot-up, select '''"Check (test) for errors" ''' to make certain there were no errors during the downloading or burning process.# If the error checking process was successful, then '''reboot the system'''.

:# '''Select "Third Party Applications" ''' in one of the initial installation screen.:# '''Select the LTSP option, and select the "connected" network interface card'''. The other network interface card will be connected to the switch that will, in turn, are connected to the workstations (thin clients).:# '''I would recommend an advanced partitioning if you have more than one hard disk'''. The current system has two hard disk drives. The first drive is the main system under the mount-point called "/" and the second hard drive has the mount-point called /backup for backing up the system. By correctly specifying these mount-points at this point will allow the system to identify and use these directories when the system is in use.Here are the recommended settings:<br /><br />'''Hard drive A ''' (/dev/sda): '''Add swap partition ''' (double size for amount of RAM), and '''add remainding remaining partition aS ''' as file-system called '''ext4 ''' with the mount-pointcalled: '''/'''<br /><br />'''Hard drive B ''' (/dev/sdb): '''Add entire file-system ''' called '''ext4 ''' with the mount-point called: '''/backup'''<br /><br />:# '''Create an administrator account''' (do NOT use the username "admin" (that name is already taken) ).# When the installation process has completed, '''remove the installation DVD''', and then '''re-boot the computer'''.