1
edit
Changes
New page: End-node Host A / Host B / Host C * Stop the dhclient * Host A: IP 10.0.0.1 / MAC xx:xx:xx:xx * Host B: 10.0.0.2 / MAC * Host C: 10.0.0.3 / MAC * Gateway: 10.0.0.254 / MAC1, MAC2 Task 0:...
End-node
Host A / Host B / Host C
* Stop the dhclient
* Host A: IP 10.0.0.1 / MAC xx:xx:xx:xx
* Host B: 10.0.0.2 / MAC
* Host C: 10.0.0.3 / MAC
* Gateway: 10.0.0.254 / MAC1, MAC2
Task 0: collect the MAC addresses on all the machine
Task 1: To find out which network interface on the gateway is connected to the LAN
* boot up and configure end-nodes
* nics=$(/sbin/ifconfig -a | grep eth | awk '{print $1}')
* assign 10.0.0.254 to the first device
* ping host A or host B, or host C
* check for result
* assgin 10.0.0.254 to the second device if the first one failed
Task 2: Configure route(s)
Host A / Host B / Host C
* Stop the dhclient
* Host A: IP 10.0.0.1 / MAC xx:xx:xx:xx
* Host B: 10.0.0.2 / MAC
* Host C: 10.0.0.3 / MAC
* Gateway: 10.0.0.254 / MAC1, MAC2
Task 0: collect the MAC addresses on all the machine
Task 1: To find out which network interface on the gateway is connected to the LAN
* boot up and configure end-nodes
* nics=$(/sbin/ifconfig -a | grep eth | awk '{print $1}')
* assign 10.0.0.254 to the first device
* ping host A or host B, or host C
* check for result
* assgin 10.0.0.254 to the second device if the first one failed
Task 2: Configure route(s)