: There are more than thirty network virtual LAN segments (VLS) in the OPS535 Virtual Lab, each network Virtual LAN segment should use the private network address space 192.168.x.0/24 for local traffic. VMs in each local LAN segment should be reachable via the gateway (your VM1) with the IP address 172.20.x.1 from VMs in other LAN segment VLSs in the lab. The value of x is also ranging from 1 to 43.* On each VM in your LAN segmentVLS, you can either add a custom route for each LAN segment other VLS in the labusing your VM1's private IP (192.168.x.1) as the gateway. You may In this case, you need to add a maximum of 42 routes in order to reach all the VMs in the other 42 LAN segments managed by your classmatesVLS. You <b>DO NOT</b> need a custom route to your own LAN segmentVLS. You can also simply add a single route to 192.168.0.0/16 using your VM1's private IP as the gateway. * Use You can either use the nmtui utility to add a static custom route for each network VLS y that you want to reach. Replace y with or use the actual value when running nmtui utility.nmcli command as given in [[VLS2VLS-routing here]]* Use Before moving on to the next step, use the "rip ip route" command to check confirm your current kernel routing table on your VM1.