OPS435 Python3 Lab 9
Currently under review and will be updated for Winter 2020 - Check back until this line is removed
Objective
- Install and configure Ansible on a controller Linux machine
- Explore Ansible's ad hoc commands
- Explore Ansible's built-in modules
- Explore and create Ansible playbooks
Overview
- Ansible is an agentless IT automation engine for automating cloud provisioning, configuration management, application deployment, intra-service orchestration, and many other IT system administration tasks.
- Ansible uses no additional custom security infrastructure, and it uses a very simple human readable language called 'YAML', to compose an Ansible Playbook which allow you to describes the tasks you want to automate.
Reference
- For more detail information about ansible, check out the ansible web site at www.ansible.com
- Overview on how ansible works
- Ansible Latest User Guide
- Learning Ansible - Second Edition via Seneca Library
- A System Administrator's guide to getting started with Ansible
System requirements
- You must have at lease two networked machines
- control machine - run ansible to configure remote node - need Ansible 2.x (latest version 2.7)
- managed machine(s) - to be managed by the control node
- You should be able to ssh from your control machine as a regular user to any of your remote machines as regular user without supplying a login password.
- You account on the remote machine should be a sudoer and can run sudo without password.
- You should also be to ssh from your control machine as a regular user to any of your remote machines as root without supplying a login password
- Python 2.7+ on all nodes
Investigation I: Introduction to Ansible
- In this introduction, we explore the main components of the Ansible configuration management system and its operating environment. we also study a simple playbook for managing the configuration of a CentOS 7.x VM.
- You need at least two VMs for this lab: one VM to be used as the control machine and one or more VMs to be used as the managed machines. You only need to install Ansible on the control machine.
Key Concepts when using Ansible
- YAML - a human-readable data serialization language use by Ansible's playbooks. To know more, your can check out the wikipedia page here or a simple introduction here
- Control machine - the host on which you use Ansible to execute tasks on the managed machines
- Managed machine - a host that is configured by the control machine
- Hosts file - contains information about machines to be managed - click here for sample hosts file
- Idempotency - is an operation that, if applied twice to any value, gives the same result as if it were applied once.
- Ad hoc commands - a simple one-off task:
- shell commands
- ansible 192.168.99.153 -a 'date'
- ansible 192.168.99.153 -a 'df'
- ansible 192.168.99.153 -a 'iptables -L -n -v' -u root
- shell commands
- Built-in modules - code that performs a particular task such as copy a file, installing a package, etc:
- copy module
- ansible 192.168.99.153 -m copy -a "src=/ops435/ansible.txt dest=/tmp/ansible.txt"
- Package management
- ansible 192.168.99.153 -m yum -a "name=epel-release state=latest"
- copy module
- Playbooks - contains one or multiple plays, each play defines a set of repeatable tasks on one or more managed machines. Playbooks are written in YAML. Every play in the playbook is created with environment-specific parameters for the target machines:
- ansible-playbook -i 192.168.99.153, setup_webserver.yaml
- ansible-playbook firstrun.yaml
Part 1: Installing Ansible on CentOS 7
- You only need to install the "ansible" package on your control VM.
- Login as a regular user, change to the directory ~/ops435/lab9
- Issue the following command to install the "ansible" package:
sudo yum install ansible -y
- You may have to install the following dependent packages:
Dependencies Resolved ===================================================================================================================== Package Arch Version Repository Size ===================================================================================================================== Installing: ansible noarch 2.9.1-1.el7 epel 17 M Installing for dependencies: python-babel noarch 0.9.6-8.el7 base 1.4 M python-cffi x86_64 1.6.0-5.el7 base 218 k python-enum34 noarch 1.0.4-1.el7 base 52 k python-httplib2 noarch 0.9.2-1.el7 extras 115 k python-idna noarch 2.4-1.el7 base 94 k python-jinja2 noarch 2.7.2-4.el7 base 519 k python-markupsafe x86_64 0.11-10.el7 base 25 k python-paramiko noarch 2.1.1-9.el7 base 269 k python-ply noarch 3.4-11.el7 base 123 k python-pycparser noarch 2.14-1.el7 base 104 k python2-cryptography x86_64 1.7.2-2.el7 base 502 k python2-jmespath noarch 0.9.0-3.el7 extras 39 k python2-pyasn1 noarch 0.1.9-7.el7 base 100 k sshpass x86_64 1.06-2.el7 extras 21 k Transaction Summary ===================================================================================================================== Install 1 Package (+14 Dependent packages) Total download size: 21 M Installed size: 120 M Is this ok [y/d/N]:
- You may have to install the following dependent packages:
- To confirm that you have Ansible installed, try the following command:
[rchan@c7-rchan ~]$ ansible --help usage: ansible [-h] [--version] [-v] [-b] [--become-method BECOME_METHOD] [--become-user BECOME_USER] [-K] [-i INVENTORY] [--list-hosts] [-l SUBSET] [-P POLL_INTERVAL] [-B SECONDS] [-o] [-t TREE] [-k] [--private-key PRIVATE_KEY_FILE] [-u REMOTE_USER] [-c CONNECTION] [-T TIMEOUT] [--ssh-common-args SSH_COMMON_ARGS] [--sftp-extra-args SFTP_EXTRA_ARGS] [--scp-extra-args SCP_EXTRA_ARGS] [--ssh-extra-args SSH_EXTRA_ARGS] [-C] [--syntax-check] [-D] [-e EXTRA_VARS] [--vault-id VAULT_IDS] [--ask-vault-pass | --vault-password-file VAULT_PASSWORD_FILES] [-f FORKS] [-M MODULE_PATH] [--playbook-dir BASEDIR] [-a MODULE_ARGS] [-m MODULE_NAME] pattern ... - Take a look of all the available command line options for the "ansible" command. There are a lots of options when running Ansible. Let's move on to try a few simple ones.
Part 2: Sample runs for some of the Ad hoc commands
[rchan@centos7 ansible]$ ansible 192.168.99.153 -m copy -a "src=/home/rchan/ops435/ansible/ansible.txt dest=/tmp/ansible.txt"
192.168.99.153 | SUCCESS => {
"changed": true,
"checksum": "837affc90674fb92cdb0ebac6e49ad31a586b37e",
"dest": "/tmp/ansible.txt",
"gid": 1001,
"group": "rchan",
"md5sum": "78ae49d77d28d06173cf2194a3909732",
"mode": "0664",
"owner": "rchan",
"secontext": "unconfined_u:object_r:user_home_t:s0",
"size": 106,
"src": "/home/rchan/.ansible/tmp/ansible-tmp-1542902119.15-117618539513309/source",
"state": "file",
"uid": 1001
}
- 192.168.99.153 is the remote machine's IP address.
- "-m copy" tells ansible to use the copy module
- after '-a' is the arguments to the copy module, which specify the source file and the destination for the copy action.
- If you got the same "SUCCESS" message, login to the remote machine (in this example, it is 192.168.99.153) and check the directory "/tmp" for the file ansible.txt.
Part 3: Sample runs for using some Ansible's built-in modules
- You can get a complete list of all the ansible modules installed on you system with the following command:
ansible-doc --list_files
- "yum" is a built-in ansible module. You can get the detail information about any ansible module with the following command:
ansible-doc yum
- The following command demonstrates how to install the "epel-release" package with the "yum" module with different module arguments and under different remote user (your result may be differ from what is show below):
[rchan@centos7 ansible]$ ansible 192.168.99.153 -m yum -a "name=epel-release state=present"
192.168.99.153 | SUCCESS => {
"changed": false,
"msg": "",
"rc": 0,
"results": [
"epel-release-7-11.noarch providing epel-release is already installed"
]
}
[rchan@centos7 ansible]$ ansible 192.168.99.153 -m yum -a "name=epel-release state=present" -u root
192.168.99.153 | SUCCESS => {
"changed": false,
"msg": "",
"rc": 0,
"results": [
"epel-release-7-11.noarch providing epel-release is already installed"
]
}
[rchan@centos7 ansible]$ ansible 192.168.99.153 -m yum -a "name=epel-release state=latest" -u root
192.168.99.153 | SUCCESS => {
"changed": false,
"msg": "",
"rc": 0,
"results": [
"All packages providing epel-release are up to date",
""
]
}
Part 4: Gather software and hardware information available on remote machine
- One of the main ansible module is called "setup", it is automatically called by ansible playbook to gather useful "facts" about remote hosts that can be used in ansible playbooks. It can also be executed directly by the ansible command (/usr/bin/ansible) to check what "facts" are available to a host.
[rchan@centos7 ansible]$ ansible 192.168.99.153 -m setup
192.168.99.153 | SUCCESS => {
"ansible_facts": {
"ansible_all_ipv4_addresses": [
"192.168.122.99",
"192.168.99.153"
],
"ansible_all_ipv6_addresses": [
"fe80::5054:ff:fe11:6767",
"fe80::5054:ff:fe8c:b67c"
],
"ansible_architecture": "x86_64",
"ansible_bios_date": "04/01/2014",
"ansible_bios_version": "1.9.1-5.el7_3.2",
"ansible_cmdline": {
"BOOT_IMAGE": "/vmlinuz-3.10.0-862.14.4.el7.x86_64",
"LANG": "en_CA.UTF-8",
"console": "ttyS0",
...
"ansible_userspace_bits": "64",
"ansible_virtualization_role": "guest",
"ansible_virtualization_type": "kvm",
"module_setup": true
},
"changed": false
}
Investigation II: Ansible Playbook
What is a playbook?
- * Playbook is one of the core features of Ansible.
- * Playbook tells Ansible what to execute by which user on the remote machine.
- * Playbook is like a to-do list for Ansible
- * Playbook is written "YAML".
- * Playbook links a task to an ansible module and provide needed arguments to the module which requires them.
Part 1: A playbook to update the /etc/motd file
Name: motd-play.yml
---
- hosts: 192.168.99.153
user: root
vars:
apache_version: 2.6
motd_warning: 'WARNING: use by ICT faculty/students only.'
testserver: yes
tasks:
- name: setup a MOTD
copy:
dest: /etc/motd
content: "{{ motd_warning }}"
Sample Run:
[rchan@centos7 playbooks]$ ansible-playbook motd-play.yml PLAY [192.168.99.153] ********************************************************** TASK [Gathering Facts] ********************************************************* ok: [192.168.99.153] TASK [setup a MOTD] ************************************************************ changed: [192.168.99.153] PLAY RECAP ********************************************************************* 192.168.99.153 : ok=2 changed=1 unreachable=0 failed=0
Part 2: A playbook to install and start Apache Server
Name: httpd-play.yml
---
- hosts: 192.168.99.153
user: root
vars:
apache_version: 2.6
motd_warning: 'WARNING: use by ICT faculty/students only.'
testserver: yes
tasks:
- name: install apache
action: yum name=httpd state=installed
- name: restart apache
service:
name: httpd
state: restarted
Sample Run:
[rchan@centos7 playbooks]$ ansible-playbook httpd-play.yml PLAY [192.168.99.153] ********************************************************** TASK [Gathering Facts] ********************************************************* ok: [192.168.99.153] TASK [install apache] ********************************************************** changed: [192.168.99.153] TASK [restart apache] ********************************************************** changed: [192.168.99.153] PLAY RECAP ********************************************************************* 192.168.99.153 : ok=3 changed=2 unreachable=0 failed=0
Investigation III: Using Playbook to configure an OPS435 Linux VM machine
- Assume you have just installed the latest version of CentOS 7.x on a VM with GNOME Desktop. You need to configure it so that you can use it for doing the Labs for OPS435. The following configuration tasks need to be done on that VM:
- update all the packages installed on the VM
- install extra packages repository for enterprise Linux
- install python3 if it is not already installed
- set the host name to your Seneca user name
- install the git package
- create a new user with your Seneca_id with sudo access
- configure the new user account so that you can ssh to it without password
- setup a directory structs for completing and organizing labs as shown below:
/home/[seneca_id]/ops435/lab0 /home/[seneca_id]/ops435/lab1 /home/[seneca_id]/ops435/lab2 /home/[seneca_id]/ops435/lab3 /home/[seneca_id]/ops435/lab4 /home/[seneca_id]/ops435/lab5 /home/[seneca_id]/ops435/lab6 /home/[seneca_id]/ops435/lab7 /home/[seneca_id]/ops435/lab8 /home/[seneca_id]/ops435/lab9 - create a playbook named "config_ops435.yml" to perform the tasks mentioned above.
- test and capture its output for a successful run of your playbook to a file named "lab9_[seneca_id].txt"
Lab 9 Sign-off (Show Instructor)
Have the following items ready to show your instructor:
- * The Ansible playbook called "config_ops435.yaml" for configuring the VM mentioned in Lab 1.
- * The result of running the playbook "config_ops435.yaml". Save the result in a file called "lab9_[seneca_id].txt"
Upload the following files to blackboard
- * config_ops435.yaml
- * lab9_[seneca_id].txt