OPS335 DNS Lab

Domain Name System

In this lab you will configure a Linux host to be a DNS server for the rest of the machines in your intranet. You'll use your learn ID as your domain with IP addresses in the range 192.168.X.1 - 192.168.X.254. The server will handle all queries for names in the <learnid>.org domain and all reverse lookups for addresses in the given range of local IP numbers. The server will pass DNS queries for other names and addresses out to the Internet (i.e. to Seneca's DNS server).

Instructions

You're going to populate your server with the following records:

Fully Qualified Domain Name  IP Address
f16.<learnid>.org            192.168.X.1
vm01.<learnid>.org           192.168.X.2
vm02.<learnid>.org           192.168.X.3
vm03.<learnid>.org           192.168.X.4

Here's what your network will look like (f13=f16):

Perform these steps on your gateway/firewall/DNS machine

• Start up your Fedora 16 PC, open a terminal window and "su -" to root. This PC will be named "f16". It will be your gateway/firewall as well as the domain name server for your intranet.
• Ensure you are connected to the Internet. Use firefox to authenticate yourself so you can surf the web outside of the Seneca domain.
• Use yum to update your system if necessary.

yum update

• Use yum to install the DNS server.

yum install bind

• If you have not already done so, permanently set the host name of the 'host' machine to "f16.<learnid>.org".

Edit /etc/named.conf

• Create a back up of the existing '/etc/named.conf', delete the existing contents and add the following: But use your own X value where applicable.

 options {
 	directory "/var/named/";
	allow-query {127.0.0.1; 192.168.X.0/24;};
	forwarders { 142.204.1.2; 142.204.43.43;};
 };
 zone "localhost" {
 	type master;
 	file "localhost.zone";
       notify NO;
 };
 zone "X.168.192.in-addr.arpa" {
 	type master;
 	file "mydb-for-192-168-X";
       notify NO;
 };
 zone "<learnid>.org" {
 	type master;
 	file "mydb-for-<learnid>-org";
       notify NO;
 };

• Create the file /var/named/localhost.zone and enter the following (note: if you copy-paste this code, there should be NO leading spaces before the "@" or the "$"):

 $TTL	3D
 @	IN	SOA	f16.<learnid>.org.	<learnid>.<learnid>.org. ( 
 			1	; Serial
 			8H	; Refresh
 			2H	; Retry
 			1W	; Expire
 			1D	; Negative Cache TTL
 ); 
 @	IN	NS	localhost.
	IN	A	127.0.0.1

• Now edit /var/named/mydb-for-<learnid>-org and enter the following: But use your own X value where applicable.

 $TTL	3D
 @	IN	SOA	f16.<learnid>.org.	<learnid>.<learnid>.org.(
 			1	; Serial
 			8H	; Refresh
 			2H	; Retry
 			1W	; Expire
 			1D	; Negative Cache TTL
 );
 @	IN	NS	f16.<learnid>.org.
 f16	IN	A	192.168.X.1
 vm01	IN	A	192.168.X.2
 vm02	IN	A	192.168.X.3
 vm03	IN	A	192.168.X.4

• Next, edit /var/named/mydb-for-192-168-X and enter the following:

 $TTL	3D
 @	IN	SOA	f16.<learnid>.org.	<learnid>.<learnid>.org. ( 
 			1	; Serial
 			8H	; Refresh
 			2H	; Retry
 			1W	; Expire
 			1D	; Negative Cache TTL
 );
 @	IN	NS	f16.<learnid>.org.
 1	IN	PTR	f16.<learnid>.org.
 2	IN	PTR	vm01.<learnid>.org.
 3	IN	PTR	vm02.<learnid>.org.
 4	IN	PTR	vm03.<learnid>.org.

• Now set up your resolver to point to itself. Edit /etc/resolv.conf, delete what's there and enter this data instead. Remember to use your value for X.

nameserver 192.168.X.1
search <learnid>.org

• Start your DNS server with the command

systemctl start named.service

• Check that your name server is running

ps ax | grep named

• or

systemctl status named.service

• When starting or restarting your name server view the log file (/var/log/messages) to ensure it started without error.
• Try a few lookups:

 host f16.<learnid>.org
 host vm01.<learnid>.org
 host vm02.<learnid>.org
 host vm03.<learnid>.org
 host cbc.ca

• Now try a few reverse lookups:

 host 192.168.X.1
 host 192.168.X.2
 host 192.168.X.3
 host 192.168.X.4

Perform these steps on your Intranet machine

Use virt-manager on Fedora 16 and open vm01.

• On this machine edit the /etc/resolv.conf file and enter the following:

 nameserver 192.168.X.1
 domain <learnid>.org

• Now try the commands

 host f16.<learnid>.org
 host vm01.<learnid>.org
 host vm02.<learnid>.org
 host vm03.<learnid>.org
 host yahoo.ca

• And the commands

 host 192.168.X.1
 host 192.168.X.2
 host 192.168.X.3
 host 192.168.X.4

• Now, still on the second machine, try surfing the web with Firefox. NOTE: you should not need to authenticate yourself through SeneNet on this machine.

• Finally, on all machines in your network, experiment with the following commands. Be sure to use several different command options to learn and understand how they work.

 host
 dig
 nslookup

Completing the Lab

Answer the following questions in your lab book:

1. What iptables rules apply to DNS?
2. Under what circumstances does DNS use TCP vs UDP?
3. What is a zone file and what is it used for?
4. Name the zone files used in this lab, and their purpose.
5. What is the purpose of /etc/nsswitch.conf?
6. What is the purpose of /etc/resolv.conf?
7. What is meant by the term "negative cache"?
8. What are MX records used for? Add the needed entry to point the MX record to VM02.
9. What security features are available for DNS?