OPS435 Python Lab 4

OBJECTIVES

The first investigation in this lab will focus on Data Structures. Each data structure has its own advantages and limitations. This lab will emphasize the most important differences as they relate to Python scripting.

The second investigation will focus closely on strings. You have been using and storing strings since our first class, however in this lab we will dive into the more complex nature of string manipulation. Finally, this lab will cover how to use a variety of different regular expression functions, for searching and input validation.

PYTHON REFERENCE

As you develop your Python scripting skills, you may start to be "overwhelmed" with the volume of information that you have absorbed over these labs. One way to help, is to learn to use online references effectively in order to obtain information regarding Python scripting techniques and tools.

Below is a table with links to useful online Python reference sites (by category). You may find these references useful when performing assignments, etc.

Data Structures	Lists & List Comprehension	Strings	Regular Expressions	Miscellaneous
Tuples Sets	Lists More on Lists List Comprehensions	Strings String Comparisons	Regular Expression Operations Regular Expressions (HOWTO)	Dictionaries

INVESTIGATION 1: DATA STRUCTURES

In this investigation, you will learn several tools when using data structures in Python scripting.

These tools include tuples, sets, dictionaries, and more advanced list functions.

PART 1 - Tuples

Many often confuse a tuple with a list (which you learned about in a previous lab). A tuple is a type of list whose values cannot be changed. In fact, nothing in a tuple can be changed after it's created (like adding, removing list elements).

There are many advantages to using tuples when creating Python scripts:

• Data protection (eg. values are are NOT allowed to change so you won't modify them accidentally)
• The data structure in a tuple cannot be changed (eg. structure cannot be corrupted)
• Tuples can be used as keys in data dictionaries (which are NOT allowed to change)
• Tuples allow for faster access than lists

The term to indicate that a data structure cannot be changed is called immutable (as opposed to "mutable" which means the data structure can be changed).

Perform the Following Steps:

1. Launch your Centos VM, open a shell terminal (as a regular user) and start a new ipython3 session:

   ipython3

   Let's create two tuples, so we can learn how to use them and learn how they differ from lists.
   
   Note: tuples are defined by using parenthesis ( ) as opposed to lists are defined by using square brackets [ ]
   
   
2. Issue the following:

   t1 = ('Prime', 'Ix', 'Secundus', 'Caladan')
   t2 = (1, 2, 3, 4, 5, 6)

3. Values from a tuple can be retrieved in the same way as a list. For example, issue the following:

   t1[0]
   t2[2:4]

4. You can also check to see whether a value exists inside a tuple or not. To demonstrate, issue the following:

   'Ix' in t1
   'Geidi' in t1

   Let's now see how a tuple differs from a list. We will now create a list and note the difference between them.
   
   
5. Issue the following to create a list:

   list2 = [ 'uli101', 'ops235', 'ops335', 'ops435', 'ops535', 'ops635' ]

6. See if you can change the value of your list by issuing the following:

   list2[0]= 'ica100'
   list2[0]
   print(list2)

   You should have been successful in changing the value of your list.
   
   
7. Now, try changing the value of your previously-created tuple by issuing:

   t2[1] = 10

   Did it work? Once created the tuple values will not be able to change.
   
   If you would like a tuple with different values than the tuple you currently have, then you must create a new one.
   
   
8. To create a new tuple, issue the following:

   t3 = t2[2:3]

9. You can use most of the basic operations with tuples as you did with lists.
   
   
10. To demonstrate, issue the following:

    len(t1)     # list the length of the tuple
    t1 * 3      # repetition
    t1 + t2     # concatenation, remember this is creating a new tuple, not modifying

11. Also, as with lists, you can use loops with tuples. Issue the following to demonstrate:

    for item in t1:
        print('item: ' + item)

PART 2 - Sets

So far, you have been exposed to two structures that are used to contain data: lists and tuples. You can modify the values within a list as well as modify the structure of a list (i.e. add and remove elements), whereby you cannot with a tuple.

In this section, you will learn about sets. A set has similar characteristics as a list, but there are two major differing characteristics:

• Sets are un-ordered
• Sets cannot contain duplicate values

Since new duplicate entries will be automatically removed when using sets, they are very useful for performing tasks such as comparisons: finding similarities or differences in multiple sets. Also, sets are considered to be fast!

Perform the Following Steps:

1. Within your ipython3 shell, create a few sets to work with by issuing the following:

   s1 = {'Prime', 'Ix', 'Secundus', 'Caladan'}
   s2 = {1, 2, 3, 4, 5}
   s3 = {4, 5, 6, 7, 8}

   Note: Sets are defined by using braces { } as opposed to tuples that use parenthesis ( ), or lists that use square brackets [ ]
   
   
2. Try to issue the following to access a set through the index.

   s1[0]

   This should have created an error, this is not how to access data inside a set because they are un-ordered. Instead, you should use the method (used in the previous section) to check to see if a value is contained within the set.
   
   
3. To demonstrate, issue the following:

   'Ix' in s1
   'Geidi' in s1

   
   Sets can be combined, but it is important to note that any duplicate values (shared among sets) will be deleted.
   
   
4. Issue the following, and note the items (and values) that are common to the following sets:

   s2
   s3

5. Now, issue the following to return a set containing only UNIQUE values (no duplicates) from both sets:

   s2 | s3         # returns a set containing all values from both sets
   s2.union(s3)    # same as s2 | s3

   Notice that both methods above provides the same result, but the first method requires less keystrokes.
   
   Instead of combining sets, we can display values that are common to both sets. This is known in mathematical terms as an intersection between the lists.
   
   
6. To demonstrate intersection between sets s2 and s3, issue the following:

   s2 & s3             # returns a set containing all values that s2 and s3 share
   s2.intersection(s3) # same as s2 & s3

7. Sets can also have their values compared against other sets. First find out what items are in s2 but not in s3. This is also called a difference. But notice that it only shows values that s2 contains, specifically values that s3 doesn't have. So this isn't really the true difference between the sets.

   s2
   s3
   s2 - s3             # returns a set containing all values in s2 that are not found in s3
   s2.difference(s3)   # same as s2 - s3

8. In order to see every difference between both sets, you need to find the symmetric difference. This will return a set that shows all numbers that both sets do not share together.
   
   
9. To demonstrate, issue the following:

   s2 ^ s3                     # returns a set containing all values that both sets DO NOT share
   s2.symmetric_difference(s3) # same as s2 ^ s3

   Note: the set() function can make lists into sets, and the list() function can make sets into lists
   
   These powerful features can be useful and efficient. Unfortunately, lists cannot perform these operations, unless we have to convert the lists into sets. In order to that, you should first perform a comparison, then convert the list to a set.
   
   There are two problems with performing the above-mentioned technique:

• Sets are un-ordered so if the list order is important this will cause problems and remove order
• Sets cannot contain duplicate values, if the list contains any duplicate values they will be deleted.

However, if the list does not have any of the above requirements this is a great solution to some problems.

10. To demonstrate, issue the following:

l2 = [1, 2, 3, 4, 5]
l3 = [4, 5, 6, 7, 8]
new_list = list(set(l2).intersection(set(l3)))  # '''set()''' can make lists into sets. '''list()''' can make sets into lists
new_list

Create a Python Script Demonstrating Comparing Sets

Perform the Following Instructions

1. Create the ~/ops435/lab4/lab4a.py script. The purpose of this script will be to demonstrate the different way of comparing sets. There will be three functions, each returning a different set comparison.
2. Use the following template to get started:

   #!/usr/bin/env python3
   
   def join_sets(s1, s2):
       # join_sets will return a set that has every value from both s1 and s2 inside it
   
   def match_sets(s1, s2):
       # match_sets will return a set that contains all values found in both s1 and s2
   
   def diff_sets(s1, s2):
       # diff_sets will return a set that contains all different values which are not shared between the sets
   
   if __name__ == '__main__':
       set1 = set(range(1,10))
       set2 = set(range(5,15))
       print('set1: ', set1)
       print('set2: ', set2)
       print('join: ', join_sets(set1, set2))
       print('match: ', match_sets(set1, set2))
       print('diff: ', diff_sets(set1, set2))

• The join_sets() function should return a set that contains all values from both sets
• The match_sets() function should return a set that contains all values found in both sets
• The diff_sets() function should return a set that contains all values which are not shared between both sets
• All three functions should accept two arguments both are sets
• The script should show the exact output as the samples
• The script should contain no errors

Sample Run 1:

run lab4a.py
set1:  {1, 2, 3, 4, 5, 6, 7, 8, 9}
set2:  {5, 6, 7, 8, 9, 10, 11, 12, 13, 14}
join:  {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}
match:  {8, 9, 5, 6, 7}
diff:  {1, 2, 3, 4, 10, 11, 12, 13, 14}

Sample Run 2 (with import):

import lab4a
set1 = {1,2,3,4,5}
set2 = {2,1,0,-1,-2}
lab4a.join_sets(set1,set2)
{-2, -1, 0, 1, 2, 3, 4, 5}
lab4a.match_sets(set1,set2)
{1, 2}
lab4a.diff_sets(set1,set2)
{-2, -1, 0, 3, 4, 5}

3. Exit the ipython3 shell, download the checking script and check your work. Enter the following commands from the bash shell.

cd ~/ops435/lab4/
pwd #confirm that you are in the right directory
ls CheckLab4.py || wget https://raw.githubusercontent.com/Seneca-CDOT/ops435/master/LabCheckScripts/CheckLab4.py
python3 ./CheckLab4.py -f -v lab4a

4. Before proceeding, make certain that you identify any and all errors in lab4a.py. When the checking script tells you everything is OK before proceeding to the next step.

Create a Python Script Demonstrating Comparing Lists

Perform the Following Instructions

1. Create the ~/ops435/lab4/lab4b.py script. The purpose of this script will be to improve the previous script to perform the same joins, matches, and diffs, but this time on lists.
2. Use the following as a template:

   #!/usr/bin/env python3
   
   def join_lists(l1, l2):
       # join_lists will return a list that contains every value from both l1 and l2 inside it
   
   def match_lists(l1, l2):
       # match_lists will return a list that contains all values found in both l1 and l2
   
   def diff_lists(l1, l2):
       # diff_lists will return a list that contains all different values, which are not shared between the lists
   
   if __name__ == '__main__':
       list1 = list(range(1,10))
       list2 = list(range(5,15))
       print('list1: ', list1)
       print('list2: ', list2)
       print('join: ', join_lists(list1, list2))
       print('match: ', match_lists(list1, list2))
       print('diff: ', diff_lists(list1, list2))

• The match_lists() function should return a list that contains all values found in both lists
• The diff_lists() function should return a list that contains all values which are not shared between both lists
• The join_lists() function should return a list that contains all values from both sets
• All three functions should accept two arguments both are lists
• The script should show the exact output as the samples
• The script should contain no errors

Sample Run 1:

run lab4b.py
list1:  [1, 2, 3, 4, 5, 6, 7, 8, 9]
list2:  [5, 6, 7, 8, 9, 10, 11, 12, 13, 14]
join:  [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14]
match:  [8, 9, 5, 6, 7]
diff:  [1, 2, 3, 4, 10, 11, 12, 13, 14]

Sample Run 2 (with import):

import lab4b
list1 = [1,2,3,4,5]
list2 = [2,1,0,-1,-2]
join_lists(list1,list2)
[0, 1, 2, 3, 4, 5, -2, -1]
match_lists(list1,list2)                                                                                                                  
[8, 9, 5, 6, 7]
diff_lists(list1,list2)                                                                                                                   
[1, 2, 3, 4, 10, 11, 12, 13, 14]

3. Exit the ipython3 shell, download the checking script and check your work. Enter the following commands from the bash shell.

cd ~/ops435/lab4/
pwd #confirm that you are in the right directory
ls CheckLab4.py || wget matrix.senecac.on.ca/~acoatley-willis/CheckLab4.py
python3 ./CheckLab4.py -f -v lab4b

4. Before proceeding, make certain that you identify any and all errors in lab4b.py. When the checking script tells you everything is OK before proceeding to the next step.

PART 3 - Dictionaries

By now, you have probably been exposed to database terminology. For example, a database is a collection of related records. In turn, records are a collection of related fields. In order to access a record in a database, you would need to access it by key field(s). In order words, those key field(s) are a key that unlocks the access to a record within a database.

In Python, a dictionary is a set of key-value pairs. Dictionaries are unordered, like sets, however any value can be retrieved from a dictionary if you know the key. This section will go over how to create, access, and change dictionaries, providing a new powerful tool to store and manipulate data.

Perform the Following Steps:

1. Launch the ipython3 shell:

   ipython3

2. Let's begin by creating a new dictionary (for practice):

   dict_york = {'Address': '70 The Pond Rd', 'City': 'Toronto', 'Postal Code': 'M3J3M6'}

   You should note that the syntax to define a dictionary is similar to defining sets (i.e. using {}).
   Unlike sets, dictionaries use key:value pairs within the dictionary, each key:value pair in turn, are separated by commas.
   
   You can get help associated with your dictionary by using functions such as dir() and help().
   
   
3. Issue the following and note all the available functions available and how to obtain assistance with dictionary objects:

   dir(dict_york)
   help(dict_york)

   All values can be viewed by using the dictionary.values() function. This particular function provides a list containing all values.
   
   
4. To demonstrate, issue the following:

   help(dict_york.values)
   dict_york.values()

   All keys to access the key:pair values within a dictionary can be viewed by using the dictionary.keys() function. This function provides a list containing all keys
   
   
5. To demonstrate this, issue the following:

   help(dict_york.keys)
   dict_york.keys()

   Armed with this information, We can retrieve individual values from a dictionary by provide the key associated with the key:pair value
   
   
6. For example, issue the following:

   dict_york['Address']
   dict_york['Postal Code']

7. Dictionary keys can be any immutable values (i.e. not permitted for value to be changed). Types of values include: strings, numbers, and tuples. Trying adding a couple new keys and values to the dictionary by issuing:

   dict_york['Country'] = 'Canada'
   dict_york
   dict_york.values()
   dict_york.keys()

8. Let's add another key:value pair to our dictionary to change the province key:pair value to BC:

   dict_york['Province'] = 'BC'
   dict_york
   dict_york.values()
   dict_york.keys()

   WARNING: Dictionary keys must be unique. Attempting to add a key that already exists in the dictionary will overwrite the existing value for that key!
   
   
9. To demonstrate, issue the following:

   dict_york['Province'] = 'ON'
   dict_york
   dict_york.values()
   dict_york.keys()

   You should notice that key value for 'Province' has been changed back to 'ON'.
   
   These lists that contain the values and keys of the dictionary are not real python lists - they are "views of the dictionary" and therefore are immutable. You could change these views into usable lists by using the list() function (where the index can be used to access individual values).
   
   
10. For example, issue the following:

    list_of_keys = list(dict_york.keys())
    list_of_keys[0]

11. In addition, lists can be changed into sets if we would like to perform comparisons with another set. To demonstrate, issue the following:

    set_of_keys = set(dict_york.keys())
    set_of_values = set(dict_york.values())
    set_of_keys | set_of_values

12. Lists can be used with for loops. To Demonstrate, issue the following:

    list_of_keys = list(dict_york.keys())
    for key in list_of_keys:
        print(key)
    for value in dict_york.values()
        print(value)

    Additional Information regarding Dictionaries:
    • The values and keys can be looped over using the index as well
    • The range() function provides a list of numbers in a range.
    • The len() function provides a the number of items in a list.
    • Used together len() and range() can be used to create a list of usable indexes for a specific list
    
    Let's create a dictionary by using lists in order to store our dictionary data. First, we need to pair the keys and values of two separate lists.
    
    
13. Issue the following:

    list_of_keys = list(dict_york.keys())
    list_of_values = list(dict_york.values())
    list_of_indexes = range(0, len(dict_york.keys()))
    list_of_indexes
    list_of_keys[0]
    list_of_values[0]

    Now, let's use these newly-created lists, len() & range() functions with a for loop to construct our dictionary:
    
    
14. Issue the following:

    list_of_keys = list(dict_york.keys())
    list_of_values = list(dict_york.values())
    for index in range(0, len(list_of_keys)):
        print(list_of_keys[index] + '--->' + list_of_values[index])

15. Looping using indexes is not the best way to loop through a dictionary. A new dictionary could be created using this method, but this is not good:

    list_of_keys = list(dict_york.keys())
    list_of_values = list(dict_york.values())
    new_dictionary = {}
    for index in range(0, len(list_of_keys)):
        new_dictionary[list_of_keys[index]] = list_of_values[index]

16. The above method uses a lot of memory and loops. The best method to create a dictionary from two lists is to use the zip() function:

    list_of_keys = list(dict_york.keys())
    list_of_values = list(dict_york.values())
    new_dictionary = dict(zip(list_of_keys, list_of_values))

17. Looping through the keys in a dictionary also provides a easy way to get the value for each key at the same time:

    for key in dict_york.keys():
        print(key + '--->' + dict_york[key])

18. An alternative (possibly more efficient) method would be to cause both the key and its value to be extracted into a single (using a for loop, and using a special object):

    for key, value in dict_york.items():
        print(key + ' | ' + value)

Create a Python Script for Managing Dictionaries

Perform the Following Instructions

1. Create the ~/ops435/lab4/lab4c.py script. The purpose of this script will be to create dictionaries, extract data from dictionaries, and to make comparisons between dictionaries.
2. Use the following as a template:

   #!/usr/bin/env python3
   
   # Dictionaries
   dict_york = {'Address': '70 The Pond Rd', 'City': 'Toronto', 'Country': 'Canada', 'Postal Code': 'M3J3M6', 'Province': 'ON'}
   dict_newnham = {'Address': '1750 Finch Ave E', 'City': 'Toronto', 'Country': 'Canada', 'Postal Code': 'M2J2X5', 'Province': 'ON'}
   # Lists
   list_keys = ['Address', 'City', 'Country', 'Postal Code', 'Province']
   list_values = ['70 The Pond Rd', 'Toronto', 'Canada', 'M3J3M6', 'ON']
   
   def create_dictionary(keys, values):
       # Place code here - refer to function specifics in section below
   
   def split_dictionary(dictionary):
       # Place code here - refer to function specifics in section below
          
   def shared_values(dict1, dict2):
       # Place code here - refer to function specifics in section below
   
   
   if __name__ == '__main__':
       york = create_dictionary(list_keys, list_values)
       print('York: ', york)
       keys, values = split_dictionary(dict_newnham)
       print('Newnham Keys: ', keys)
       print('Newnham Values: ', values)
       keys, values = split_dictionary(york)
       print('York Keys: ', keys)
       print('York Values: ', values)
       common = shared_values(dict_york, dict_newnham)
       print('Shared Values', common)

• The script should contain three functions:

create_dictionary()

1. accepts two lists as arguments keys and values, combines these lists together to create a dictionary
2. returns a dictionary that has the keys and associated values from the lists

split_dictionary()

1. accepts a single dictionary as a argument and splits the dictionary into two lists, keys and values
2. returns two lists: The return function can return multiple lists (separated by a comma). In our case, use: return keys, values

shared_values()

1. accepts two dictionaries as arguments and finds all values that are shared between the two dictionaries
   (Tip: generate sets containing only values for each dictionary, then use a function mentioned in a previous section to store the values that are common to both lists)
2. returns a set containing ONLY values found in BOTH dictionaries

• make sure the functions have the correct number of arguments required
• The script should show the exact output as the samples
• The script should contain no errors

Sample Run 1:

run lab4c.py
York:  {'Country': 'Canada', 'Postal Code': 'M3J3M6', 'Address': '70 The Pond Rd', 'Province': 'ON', 'City': 'Toronto'}
Newnham Keys:  ['Country', 'Postal Code', 'Address', 'Province', 'City']
Newnham Values:  ['Canada', 'M2J2X5', '1750 Finch Ave E', 'ON', 'Toronto']
York Keys:  ['Country', 'Postal Code', 'Address', 'Province', 'City']
York Values:  ['Canada', 'M3J3M6', '70 The Pond Rd', 'ON', 'Toronto']
Shared Values {'Canada', 'ON', 'Toronto'}

Sample Run 2(with import):

import lab4c
dict_york = {'Address': '70 The Pond Rd', 'City': 'Toronto', 'Country': 'Canada', 'Postal Code': 'M3J3M6', 'Province': 'ON'}
dict_newnham = {'Address': '1750 Finch Ave E', 'City': 'Toronto', 'Country': 'Canada', 'Postal Code': 'M2J2X5', 'Province': 'ON'}
list_keys = ['Address', 'City', 'Country', 'Postal Code', 'Province']
list_values = ['70 The Pond Rd', 'Toronto', 'Canada', 'M3J3M6', 'ON']

york = create_dictionary(list_keys, list_values)

york
{'Address': '70 The Pond Rd',
 'City': 'Toronto',
 'Country': 'Canada',
 'Postal Code': 'M3J3M6',
 'Province': 'ON'}

keys, values = split_dictionary(dict_newnham)

keys
['Country', 'Postal Code', 'Address', 'Province', 'City']

values
['Canada', 'M2J2X5', '1750 Finch Ave E', 'ON', 'Toronto']

keys, values = split_dictionary(york)

keys
['Country', 'Postal Code', 'Address', 'Province', 'City']

values
['Canada', 'M3J3M6', '70 The Pond Rd', 'ON', 'Toronto']

common = shared_values(dict_york, dict_newnham)

common
{'Canada', 'ON', 'Toronto'}

3. Exit the ipython3 shell, download the checking script and check your work. Enter the following commands from the bash shell.

cd ~/ops435/lab4/
pwd #confirm that you are in the right directory
ls CheckLab4.py || wget https://raw.githubusercontent.com/Seneca-CDOT/ops435/master/LabCheckScripts/CheckLab4.py
python3 ./CheckLab4.py -f -v lab4c

4. Before proceeding, make certain that you identify any and all errors in lab4c.py. When the checking script tells you everything is OK before proceeding to the next step.

INVESTIGATION 2: STRINGS

Strings are basically a list of characters (bits of text). Strings store text so that they can be later for manipulation (by a wide range of functions). This section will investigate strings in more detail such as cutting strings into sub-strings, joining strings, formatting strings, searching through strings, and matching strings against patterns.

Strings are immutable data objects - this means that once a string is created, it cannot be modified. In order to make a change inside a string, you would first make a copy of the part of the string (i.e. sub-string) for manipulation.

PART 1 - Strings and Substrings

This first part will explain basic concepts of using strings, printing strings, and manipulating sub-strings.

Perform the Following Steps:

1. Launch the ipython3 shell

   ipython3

2. Issue the following to create strings:

   course_name = 'Open System Automation'
   course_code = 'OPS435'
   course_number = '435'

   Strings can contain any characters inside them, whether they are letters, numbers, or symbols. In our ipython3 shell the values inside each string variable can be seen just by typing the string variable name. However, when writing python scripts, these string variables should be placed inside print() functions in order to display on the screen.
   
   Strings can also be concatenated (i.e. "combined together") by using the + sign, just make sure string are only concatenating other strings(no lists, no numbers, no dictionaries, etc.).
   
   
3. To demonstrate what was previously mentioned, issue the following:

   course_name
   course_code
   course_number
   print(course_name)
   print(course_code)
   print(str(course_number))
   print(course_name + ' ' + course_code + ' ' + str(course_number))

   Strings can also use special syntax for string repetition by multiplying the string by a number. This will repeat that string that many times. Repetition with * is useful whenever a string needs to be repeated more than once
   
   
4. Issue the following:

   print(course_name + '-' + course_code)
   print(course_name + '-'*5 + course_code)
   print(course_name + '-'*25 + course_code)
   print('abc'*2)
   print(course_code*5)

   When using the print() function, you can display special characters. One such special character is the is the newline character (denoted by the symbol: \n). This allows you to separate content between new lines or empty lines.
   
   
5. To demonstrate, issue the following:

   print('Line 1\nLine 2\nLine 3\n')

6. By using both string repetition and a newline character, multiple lines can be created at once. Issue the following:

   print('Line 1' + '\n'*4 + 'Line 5\nLine 6')

7. Strings have many built-in functions that we can use to manipulate text. Let's take a look at the strings name space and the available functions:

   dir(course_name)
   help(course_name)

8. Lets try out several different functions. Refer back to the help() function for more information, these are quick ways to view strings in different ways. Issue the following:

   course_name.lower()         # Returns a string in lower-case letters
   course_name.upper()         # Returns a string in upper-case letters
   course_name.swapcase()      # Returns a string with upper-case and lower-case letters swapped
   course_name.title()         # Returns a string with upper-case first letter of each word, lowercase for remaining text
   course_name.capitalize()    # Returns a string with upper-case first letter only, lowercase for remaining text

9. These values can be saved inside new strings and then reused:

   lower_name = course_name.lower()    # Save returned string lower-case string inside new string variable
   print(lower_name)

10. If a string contains many values separated by a single character, such as a space, the string can be split on those values and create a list of values

    lower_name.split(' ')       # Provide the split() function with a character to split on

    The above example will return a list of strings, which we can access just like all of lists.
    
    
11. Let's practice more string manipulation by issuing the following:

    list_of_strings = lower_name.split(' ')     # Split string on spaces and store the list in a variable
    list_of_strings                             # Display list
    list_of_strings[0]                          # Display first item in list

    Since lists are actually a list of strings, you should be able to use any function that works with a string on a list.
    
    
12. To demonstrate, issue the following:

    list_of_strings[0].upper()           # Use the function after the index to affect a single string within a list
    first_word = list_of_strings[0]
    first_word
    print(first_word)

    The index that is used to access items within a list, can also be used to access characters within a string. For practice, let's create a new string, and start accessing the strings index.
    
    
13. Issue the following:

    course_name = 'Open System Automation'
    course_code = 'OPS435'
    course_number = 435
    course_code[0]                          # Return a string that is the first character in course_code
    course_code[2]                          # Return a string that is the third character in course_code
    course_code[-1]                         # Return a string that is the last character in course_code
    str(course_number)[0]                   # Turn the integer into a string, return first character in that string
    course_code[0] + course_code[1] + course_code[2]

    You can use a technique that uses index numbers of a string to cut-out or "parse" smaller portions of text within a string. This term is referred to as a substring. We can use this to create a new string or display only a small portion of it
    
    
14. To demonstrate, issue the following:

    course_name[0:4]                        # Return the first four characters (values of index numbers 0,1,2, and 3) 
    first_word = course_name[0:4]           # Save this substring for later use
    course_code[0:3]                        # Return the first three characters (values of index numbers 0,1,and 2)

15. The index allows a few extra functions using the same parsing technique:

    course_name = 'Open System Automation'
    course_name[12:]                        # Return the substring '12' index until end of string
    course_name[5:]                         # Return the substring '5' index until end of string
    course_name[-1]                         # Return the last character

    With negative indexes, -1 index would represent the last character, -2 index would represent the second last character, etc.
    
    
16. To demonstrate, issue the following:

    course_name = 'Open System Automation'
    course_name[-1]
    course_name[-2]

17. Issue the following to practice some of the skills that you have learned in this section:

    course_name = 'Open System Automation'
    course_name[-10:]                                   # Return the last ten characters
    course_name[-10:-6]                                 # Try and figure out what this is returning 
    course_name[0:4] + course_name[-10:-6]              # Combine substrings together
    substring = course_name[0:4] + course_name[-10:-6]  # Save the combined substring as a new string for later
    substring

18. The real power found in substrings goes beyond just manually writing index values and getting back words. The next part of this investigation will cover how to search through a string for a specific word, letter, number, and return the index to that search result.

Create a Python Script Demostrating Substrings

Perform the Following Instructions

1. Create the ~/ops435/lab4/lab4d.py script. The purpose of this script is to demonstrate creating and manipulating strings. There will be four functions each will return a single string.
2. Use the following template to get started:

   #!/usr/bin/env python3
   # Strings 1
   
   str1 = 'Hello World!!'
   str2 = 'Seneca College'
   
   num1 = 1500
   num2 = 1.50
   
   def first_five():
       # Place code here - refer to function specifics in section below
   
   def last_seven():
       # Place code here - refer to function specifics in section below
   
   def middle_number():
       # Place code here - refer to function specifics in section below
   
   def first_three_last_three():
       # Place code here - refer to function specifics in section below
   
   
   if __name__ == '__main__':
       print(first_five(str1))
       print(first_five(str2))
       print(last_seven(str1))
       print(last_seven(str2))
       print(middle_number(num1))
       print(middle_number(num2))
       print(first_three_last_three(str1, str2))
       print(first_three_last_three(str2, str1))

• The script should contain four functions (use your own argument names):

first_five():

1. Accepts a single string argument
2. Returns a string that contains the first five characters of the argument given

last_seven():

1. Accepts a single string argument
2. Returns a string that contains the last seven characters of the argument given

middle_number():

1. Accepts a integer as a argument
2. Returns a string containing the second and third characters in the number

first_three_last_three():

1. Accepts two string arguments
2. Returns a single string that starts with the first three characters of argument1 and ends with the last three characters of argument2

• Example: first_three_last_three('abcdefg', '1234567') returns single string 'abc567'

Sample Run 1

run lab4d.py 
Hello
Senec
World!!
College
50
.5
Helege
Send!!

Sample Run 2(import)

import lab4d
str1 = 'Hello World!!'
str2 = 'Seneca College'
num1 = 1500
num2 = 1.50
lab4d.first_five(str1)
'Hello'
lab4d.first_five(str2)
'Senec'
lab4d.last_seven(str1)
'World!!'
lab4d.last_seven(str2)
'College'
lab4d.middle_number(num1)
'50'
lab4d.middle_number(num2)
'.5'
lab4d.first_three_last_three(str1, str2)
'Helege'
lab4d.first_three_last_three(str2, str1)
'Send!!'

3. Exit the ipython3 shell, download the checking script and check your work. Enter the following commands from the bash shell.

cd ~/ops435/lab4/
pwd #confirm that you are in the right directory
ls CheckLab4.py || wget matrix.senecac.on.ca/~acoatley-willis/CheckLab4.py
python3 ./CheckLab4.py -f -v lab4d

4. Before proceeding, make certain that you identify any and all errors in lab4d.py. When the checking script tells you everything is OK before proceeding to the next step.

LAB 4 SIGN-OFF (SHOW INSTRUCTOR)

Students should be prepared with all required commands (system information) displayed in a terminal (or multiple terminals) prior to calling the instructor for signoff.

Have Ready to Show Your Instructor:

✓ Output of: ./CheckLab4.py -f -v

✓ Output of: cat lab4a.py lab4b.py lab4c.py lab4d.py

LAB REVIEW

1. What is the purpose of a tuple? How does a tuple differ from a list?
2. How do you define elements within a tuple?
3. Write Python code to confirm if the string 'OPS435' exists within the tuple called courses.
4. What is the purpose of a set? How do sets differ from lists or tuples?
5. How do you define elements within a set?
6. Assuming you have defined two sets called set1 and set2. Write Python code to:
   1. Return a set containing all values of both sets
   2. Returns a set containing all values in set1 that are not found in set2
   3. Return a set containing all values that both sets DO NOT share
7. What is the purpose of a dictionary?
8. How do you define elements within a dictionary?
9. Write Python commands to display for a dictionary called my_dictionary the dictionary key called my_key and a dictionary value for that key?
10. What is the purpose for the range(), len(), append(), and map() functions for a dictionary?
11. List and briefly explain the following functions (methods) that can be used with strings:
    lower() , upper() , swapcase() , title() , captilize() , split()
12. Assume you issued the following command in your ipython3 shell:
    course_name = 'Programming with Python'
    What will be the output for each of the following Python commands?
    1. course_name[3:11]
    2. course_name[10:]
    3. course_name[-1]