This page will serve as a table of contents for the Seneca-CD CDOT research project.

People

Blog

1 Figure out what OpenNebula is capable of, how hard it is to set up, perhaps go through one setup.
2 Read about iSCSI, check out OpenFiler, hopefully set it up, at least as a test if we don't yet have a dedicated box for the storage.
Test the local network speed, confirm it's close to Gbps.
~~Connect the two PCs into the local network.~~

~~Verify that the two desktops we start with are working and capable of supporting virtualization.~~
~~Verify two of the network sockets work, and what the IP/subnet/DNS numbers to use are.~~
~~Get setup on the project blog, start posting on it.~~
~~Download and set up the latest CentOS, confirm kvm/libvirt/virt-manager work.~~

Arrange a visit to CloudDynamics for a tech demo.
Discuss the idea of weekly short conference calls to make sure we're on the right track.
Ask Peter about writing on the wall.
~~Print the network diagram.~~
Ask Dawn about moving the mac somewhere else.
~~Get more network cables.~~
~~Talk to Diana about paperwork.~~

~~Get at least two more boxes (better 3).~~ On order due week of the 12th of Nov.
~~Talk to Jordan / Chris T. about Trac on monday or tuesday.~~
~~Figure out the workspace network settings.~~
~~Figure out whether a gigabit switch is necessary to support running VMs with the disk on another machine and figure out what it would cost.~~
~~Obtain 8-port switch~~ and 8 cables. On order due week of the 12th of Nov.
~~Obtain a port-forwarding-capable NAT router.~~
~~Meet with David G. about project plan.~~
~~Ask about keys for cabinets~~