DPI908/SBR600 RPM Signing Lab

From CDOT Wiki
Revision as of 13:35, 19 September 2012 by Chris Tyler (talk | contribs) (Created page with 'Category:DPI908/SBR600 Labs = Purpose = To learn how to create a repository. = Background Resources = Signing and Creating a Repository for RPM Packages = Required Re…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Purpose

To learn how to create a repository.

Background Resources

Signing and Creating a Repository for RPM Packages

Required Resources

Before starting this lab, you will need:

  1. The RPMs from the previous lab.

Preparation

  • Install these packages if they are not already installed:
    1. rpm-sign
    2. gnupg

Steps

Using the procedures on the Signing and Creating a Repository for RPM Packages page:

  1. Create gpg certificates
  2. Sign your RPM packages
  3. Create the ASCII public key file

Deliverable

Create a blog post describing your experience. Include:

  • Notes on what you did, and what worked and didn't work.
  • The results, including a link to one signed RPM package and your ASCII public key file.
  • Your reflections on the tools, process, and experience.
Retrieved from "https://wiki.cdot.senecapolytechnic.ca/w/index.php?title=DPI908/SBR600_RPM_Signing_Lab&oldid=87860"