X-Gene Information

Basic information about the X-Gene Servers

Boot Software

The systems ship with uBoot in SPI flash with console on serial /dev/ttyS0 at 115200/8/n/1

Default Linux Installation

User/pass: root/root User/pass: default/NULL

~800MB

IP Address is preset to 10.x.x.x

Ethernet port assignments

With the default Linux installation:

• eth0: 1GBE upper-right corner (above USB ports)
• eth1: 1GBE lower-left corner
• eth2: 1GBE upper-left corner
• eth3: 10GBE sfp+

All four ports have been confirmed to work. iperf reports 9.41 GB/s on the 10GBE port when directly connected to another X-Gene.

IP Information

These machines are currently connected to Iraq, with static IPs on the eth0 mac addresses.

Iraq has the corresponding hostnames red, blue, and green assigned in /etc/hosts (these names match the ethernet cable colours).