Winter 2010 Presentations/Storage Performance
Contents
Title
Storage Performance By: David Chisholm (dmchisho@learn.senecac.on.ca)
Introduction
In order to have our Koji Build Farm run as efficiently as possible we needed to find out which form of data storage would be the fastest overall. The candidates were:
- PATA Hard Drive connected via USB
- NFS share from HongKong
- iSCSI network connection to HongKong
There are 3 main performance stats that we are concerned about when rating storage performance.
1. Read: The amount of data that can be read from the storage medium per second.
2. Write: The amount of data that can be written to the storage medium per second.
3. Access: Time required for a computer to process data from the processor and then retrieve the required data from a storage medium.
The fastest overall
Approach
Benchmark using a linux untiliy called Bonnie++ written by Russell Coker.
The Benchmark was run 3 times on each medium, the results were then averaged together.
The command used is as follows:
bonnie++ -d <location> -s 2048 -u root
Process
What happened while you worked on the problem? You had multiple iterations -- what happened at each milestone? Did you go down the wrong path and have to start over? What barriers did you encounter? The process was simple, find a storage solution that would result in the best build times while using the most efficient use of the storage resources available to us.
The main issue encountered was finding a repeatable benchmarking solution what would give the desired results while being able to test all 3 of our storage mediums. Common Linux tools such as the DD command are capable of doing disk benchmarking, but will only work of real devices and not network file systems.
The solution was Bonnie++, a Linux command line utility which gives an extensive amount amount of storage performance information while also having the ability to test all of our storage systems.
Discovery
We discovered that finding a viable benchmarking solution is harder then it sounds. Raw data will not always correspond with real results as it comes down to the application using those resources.
Results
Write
| Transfer Speed | Percentage Increase | CPU Usage | Percentage Increase | |
|---|---|---|---|---|
| PATA | 28,790 KB/s | 0% | 24% | 0% |
| NFS | 43,363 KB/s | 50% | 16% | -50% |
| iSCSI | 31,503 KB/s | 9% | 30% | 25% |
Read
| Transfer Speed | Percentage Increase | CPU Usage | Percentage Increase | |
|---|---|---|---|---|
| PATA | 25,991 KB/s | 0% | 10% | 0% |
| NFS | 51,789 KB/s | 99% | 85% | 850% |
| iSCSI | 59,147 KB/s | 127% | 84% | 840% |
Access
Links
- Access Time - http://en.wikipedia.org/wiki/Access_time
