Fedora ARM Secondary Architecture/SheevaPlug

SheevaPlug Specifications

Sheeva CPU Core

1.2 GHz operation

L1 Cache: 16K Instruction + 16K Data

L2 Cache: 256KB

Memory

DDR2 400MHz, 16-bit bus

512MB DDR2: 1Gb x8, 4 devices

Power efficient Samsung devices

NAND FLASH Controller, 8-bit bus

512MB NAND FLASH: 4Gb x8, direct boot

128-bit eFuse Memory

Power Power input: 100-240VAC/50-60Hz 19W DC Consumption: 5V/3.0A High efficiency POL DC-DC converters

Development Interface

System Development Board JTAG and Console Interface via USB SDIO expansion JTAG OpenOCD support via USB High Speed I/O & Peripherals GE, USB 2.0 Host RTC w/ Battery UL/CE/FCC certified

For more information

Accessing SheevaPlug from a Windows box

Connecting to the Sheevaplug Using Windows

Installing F12 on an SD

1. Plugn ethernet cable into the SheevaPlug and connect it to your router.

2. Check the DHCP table on the router to find out the IP that was assigned to the SheevaPlug (i.e. 192.168.15.109)

3. SSH root@<ip address> (i.e. 192.168.15.109)

4. Insert the SD card into the SheevaPlug's card reader slot.

5. dmesg | tail (shows the mount point) (i.e. /dev/mmc1)

6. Partition the SD card using fdisk /dev/mmc1

Booting from the SheevaPlug

Configuring U-boot