OPS235 Lab 6 - Fedora17

Configuring a Network Using Virtual Machines

Caution!
This lab is very much under construction. Please do not start it until this warning is removed.

Objectives

• Configure a virtual network for Virtual Machines
• Use the Fedora GUI program to configure network interfaces with static IP configuration and host name resolution
• Use the find command to locate the configuration files modified by the GUI network configuration program
• To examine some of the Linux's TCP/IP configuration files in the /etc/ directory
• To configure a Fedora host with static network configuration without a GUI tool
• To use and interpret the netstat command to troubleshoot and monitor network services
• To configure the linux firewall iptables to allow/disallow/forward different types of network traffic using simple rules

Reference

• man pages for find, ifconfig, ping, netstat, NetworkManager, nslookup, iptables, arp
• Online reading material for week 8.

Required materials

• Fedora 12 Live CD or a classmate on the same pod
• USB flash drive, 64 MB or more in size (Warning: the contents of this drive will be erased)
• One SATA hard disk in a removable drive tray with Fedora host and 3 Fedora Virtual Machines installed

Current Configuration

Currently you should have the following network configuration:

• Fedora host has 1 active network interface (probably eth0)that receives IP configuration from the School's DHCP server.
• Fedora host has 1 active network interface (virbr0) that has a static default configuration of 192.168.122.1/255.255.255.0
• Fedora1 VM has 1 active interface (eth0) that receives a dynamic configuration from your Fedora Host
• Fedora2 VM has 1 active interface (eth0) that receives a dynamic configuration from your Fedora Host
• Fedora3 VM has 1 active interface (eth0) that receives a dynamic configuration from your Fedora Host

Lab Preparation

Important
It is advisable to perform a yum update on your Fedora host and all 3 VM's.

Important We will be working with your 3 VM's
Backup your VM disk images and then stop all 3 VM's for until told to start them.

Lab Investigations

Investigation 1: How do you create a new virtual network.

Note!
Complete this investigation on your fedora host.

Before configuring our network we want to turn off dynamic network configuration for our Virtual Machines by turning off the "default" virtual network.

1. On the fedora host start Virtual Machine Manager
2. Under Edit->Host Details select the Virtual Networks tab
3. Disable the default configuration from starting at boot by deselecting the "Autostart On Boot" checkbox.
4. Stop the default network configuration by clicking on the stop button at the bottom of the window.
5. Click on the add button to add a new network configuration.
6. Give your new network a name (network1)
7. Enter in the new network IP address space:
   • 192.168.235.0/24
8. Disable DHCP by deselecting the check box.
9. Enable Network Forwarding by Selecting "Forwarding to physical network"
10. The destination should be "Any physical device" and the mode should be "NAT"
11. Now we need to add our new virtual network "network1" to the 3 VM's
    1. Select the fedora1 VM and edit the VM details
    2. Under View select Details
    3. In the left pane select the NIC and note that this NIC is on the "default" virtual network
    4. Click on the Remove button
    5. Click on "Add Hardware" and add a new network
    6. For the host device select "Virtual Network network1" : NAT
12. Repeat these steps for fedora2 and fedora3 VM's
13. Answer the Investigation 1 question in your lab log book.