OPS335 Lab 4b

OVERVIEW

Last week, you configured and ran the Postfix application for our MTA (a.k.a. SMTP server) on our vm2 and vm3 machines.

That setup some major drawbacks:

• It required an SMTP server (MTA) to be configured on each machine.
• The Message Store (MS) would also be unique to each machine - what a user received on one server would not exist on any other.

In this lab you will centralize some of this information, so that a user can send email from any machine in the network, and have incoming mail sent to a centralized messages store.

The a diagram below (duplicate to lab 4a) shows your basic setup of your email system:

You will begin by modifying the existing Postfix (MTA) servers to make mail they send come from your domain (instead of each machine). Then you will add a record to your DNS server to allow mail to be sent to the domain itself, instead of the individual machines. Next, you will add a Local Delivery Agent (LDA) to your vm3 by installing dovecot-lda, configure it, and test it to make sure that is is working correctly.

Finally, you will set up an IMAP server called Dovecot on your vm3 machine, so you can read your email from an MUA such as Thunderbird or a Webmail application. You will set up a webmail application called Roundcube in a later lab).

Learning About the Services Involved in an Email Delivery

In reality, the terms MTA, MDA, MUA, LDA can actually be considered misleading since some of those services can be combined together to form a single entity (application), while other applications may operate as separate entities. There may be overlap, so if you don't find those acronyms helpful, don't worry too much about them. On the other hand, when referred to in diagrams, they can help to visualize those processes when trying to understand how an e-mail system works.

Here is an overview of those terms (from the Dovecot wiki). It is worth viewing this link.

In the diagram displayed above, the elements include:

• User Account. The individual who wants to send or receive mail messages.
• MUA (email client). This is the application that the individual uses to send or receive mail messages. It can be a native application or a web application. You will learn how to setup and use both types of these applications throughout the remainder of this course.
• Two MTA servers. These are the servers responsible for getting your emails to the destination server.
  • They are similar to routers (which route packets) but work on the application layer rather than the network layer.
  • In our example, there are only two MTAs - but there can be several.
  • You connect to your MTA over a secure connection, so your emails can't be read by the operators of the network you're connected to.
  • The mail message then travels the rest of the way to the destination MTA unencrypted, so anyone with access to the routers in-between can read all your emails. That is why many organizations will refuse to send you confidential information over email.
• LDA/MDA Server. This server will receive the email from the MTA, and will store it on disk in some format. MailDir and MBOX are the most popular mailbox formats.
• IMAP/POP3 server(s). When sending an email, you send it to the destination using your MTA, but you also want to save it in your "Sent" folder for yourself. This is accomplished by a separate connection to either your IMAP or POP3 server.
  • Thus, a situation can occur that although you sent your email successfully, it may never make it to your "Sent" folder - the second connection to your IMAP server is quite unrelated to the first connection to the SMTP server.
• DNS Server. A DNS server is also involved - it is needed to retrieve the address of the email server responsible for email for a particular domain. This is done with MX records.

Online References

• Seneca Client Settings (Seneca Server settings for mail client - Thunderbird)
• Dovecot Community Documentation
• Setting up an IMAP Server with Dovecot
• Dovecot-lda
• Configuring dovecot-lda with postfix

INVESTIGATION 1: INSTALL THUNDERBIRD (MUA) and SETUP A REFERENCE CLIENT

Unlike the mailx (MUA) application you installed and used in Lab 4a, this lab will be using the Thunderbird (MUA) application instead which is a graphical application that uses a centralized Message Store (MS) to retrieve and read mail messages.

Although we will be eventually setting up the Thunderbird application to perform all the mail operations discussed above, you need to learn to "walk before you can run". Eventually, you are going to set up all those mail services, but to begin with, you will set up an email client to connect to an already working server which is the Seneca email server. Once we learn how to do this for our Seneca email account, then we can use it for our mail servers for our VM2 and VM3.

Perform the following steps:

1. Switch to your host machine, and install the Thunderbird email application.
2. When you first launch the Thunderbird application, a configuration dialog should appear as shown in the diagram below:

3. Use the data in the table below to configure the Thunderbird settings dialog box for YOUR Seneca e-mail account:

Setting	IMAP	SMTP
Username	yoursenecauserid@myseneca.ca	yoursenecauserid@myseneca.ca
servername:	pod51038.outlook.com	pod51038.outlook.com
port:	993	587
security:	SSL/TLS	STARTTLS
Reference:		How-to setup Seneca LearnID @myseneca.ca with Email Clients

Note that your username is your full email address)(firstname.lastname@senecaretirees.ca) and not just firstname.lastname.

Unencrypted Options
Notice that there are unencrypted options available to connect to your SMTP/IMAP servers but those are rarely used these days - the potential for abuse is too great. On a free wifi network, the operator would be able to not only read your email, but also obtain your password without any password/encryption cracking tools. In fact, even on a private wired network, it is not uncommon for an employer to use a packet sniffer utility to monitor all the traffic going over their network (Packet Sniffing applications were actually found to be legally acceptable practices if used by the management of organizations)

3. After you create your Thunderbird account, you should be able to read your existing email and send new email within the Thunderbird application.
4. Take time to view your Account Settings and Preferences to get a feel for what settings exist. For example:
   • How often will Thunderbird check for new messages?
   • Will the messages you write be in HTML or plain text?
   • How do you change your SMTP server settings? Why are they in a different section?
5. The main objective of this section was to learn how to setup your Thunderbird application to read your Seneca email, so in the next section you can use the exact type of setup for your own email server.

Record steps, commands, and your observations in INVESTIGATION 1 in your OPS335 lab log-book

INVESTIGATION 2: SETTING UP MTA FOR RECEIVING EMAIL

Specifying Which Domains are Used to Send Mail Messages

As of last lab, both of your email servers are sending mail addressed from users of the machines themselves. This would be confusing for the receiver who might get emails from the same user @vm1, vm2, and vm3. Which would they respond to? To avoid this, we can make all servers make the sent mail appear to come from a common location (usually the domain), and make incoming email sent to that address accessible from machines inside our network.

Look at the email messages you sent between your vm2 and vm3 in lab 4a. Notice that each is addressed from root on whichever machine sent it.

On both machines, edit /etc/postfix/main.cf and change the myorigin parameter from $myhostname to $mydomain. Restart postfix and send emails between the machines again. The sender address should now read root@yourdomain.org.

Specifying Which Domains are Used to Deliver the "Received" Mail Messages

The next step is to configure what addrssess the server will receive email for. This is done using postfix by setting the mydestination parameter (configuration variable) to include $mydomain (this is assuming you've set up mydomain, myorigin , and inet_interfaces properly).

Perform the following steps on vm3:

1. Edit the /etc/postfix/main.cf file.
2. Scroll down to the line containing: mydestination and change line to the text shown below:

mydestination = $mydomain, $myhostname, localhost.$mydomain, localhost

Note: Even though your machine's name is vm3.yoursenecaid.org, your postfix MTA will also receive emails addressed to the domain called: yoursenecaid.org

In order for this to work, we need to add a DNS record that will point mail sent to the domain towards one of the SMTP servers configured to accept it.

Add an MX record to the forward lookup zone on vm1 so that all incoming mail addressed to the domain is sent to your vm3. Restart the service and use dig to confirm that it works.

Send an email from your vm2 to root@yourdomain.org. Confirm that it arrives on vm3.

Relaying Email Through Another Server

When email is sent from either vm, it is addressed from the domain, but receiving MTAs might query why mail sent from vm2 doesn't match the address of the MX record for the domain. This would be a red-flag for potential spam. To avoid this, we can relay all mail sent from vm2 (or any other machine in our network) through vm3 so that it properly appears to come from the mail server that matches the MX record for the domain.

• First, we must direct vm2 to relay mail through vm3, by editing /etc/postfix/main.cf again:

relayhost = vm3.<yourdomain>.org

• Remember to restart postfix once you have done so.
• Next, we must tell vm3 to allow vm2 to pass email through it:

mynetworks = 192.168.X.0/24

• Substitute in your own network for X, and remember to restart postfix.

All mail is now being delivered to a centralized location (and also appears to be coming from that same location), but a user would still have to access that server to retrieve it.

Installing and Configuring the Local Delivery Agent (LDA)

Postfix is capable of performing the function of an LDA, but its LDA capabilities are limited, thus postfix is generally not used for that purpose. Currently, the most popular LDA is LMTP, but we will be installing, configuring, and using an LDA called Dovecot since it is also popular and we will later be setting up Dovecot as an IMAP server. Using both Postfix and Dovecot will actually increase the performance of our IMAP server.

Perform the following steps on vm3:

1. Dovecot is not installed when you installed your Virtual machines in previous labs.
2. Install the Dovecot application by issuing the following command:
   yum install dovecot
3. Edit your /etc/postfix/main.cf file and scroll down to (or search for) mailbox_command. Add the following line:

mailbox_command = /usr/libexec/dovecot/dovecot-lda -f "$SENDER" -a "$RECIPIENT"

NOTE: Do not replace any variables, those are set automatically by Postfix when it runs the LDA. If you are interested in learning more about the Dovecot application, you can read about dovecot-lda here and here.

4. Finally, edit the /etc/dovecot/conf.d/10-mail.conf file and indicated where you want your mail delivered by including the following line

mail_location = maildir:~/Maildir

5. Restart your postfix service.
6. While the emails are still stored only on VM3, they will now be easier for other machines/services to access.

Record steps, commands, and your observations in INVESTIGATION 2 in your OPS335 lab log-book

INVESTIGATION 3: USING THUNDERBIRD (MUA) FOR VM2 and VM3 MACHINES

Perform the following steps:

1. On your host machine, return to the Mail Account Setup dialog box (eg. near top of lab).
2. Set up the account settings to connect to your vm2 for SMTP and vm3 for IMAP. Use no encryption, and use normal password authentication for IMAP (we don't have an IMAP server running yet, but that's ok). Refer to the diagram below for reference:

NOTE: Thunderbird won't let you proceed with the "Done" button because you will fail to connect to IMAP.

3. Use the "Advanced config" button to bypass that check.
4. Use the Thunderbird application to send an email to your myseneca address. If you've done everything right, it will send the message successfully, but it will fail to save it in the Sent folder since that's done with IMAP and you don't have an IMAP server yet.
5. Verify that your message has been sent. Check your myseneca email and look at /var/log/maillog on vm2 (your email server).

Sending a Mail Message from VM2 (Using Thunderbird)

Sent messages will not be saved to the sent folder
During this step the messages you send will not be saved to the sent folder and Thunderbird will permanently hang with a message that it is saving the message. It will never succeed, as we have not yet configured the imap server to accept the connection necessary for that to work.

Perform the following steps:

1. Use the ss and nc commands (like you did in lab 4a) to confirm your service is listening on the correct ports/interfaces. You will probably have to open the appropriate firewall port on vm3 to allow incoming SMTP connections.
   
   Note: You should be able to send email to any regular user on vm3 using the email address yourusername@yoursenecaid.org using the Thunderbird application on your host machine (which is configured to use the account on your vm2).
   
   

2. Create a new account on your vm3 machine using only your first name. We will use this account as a one-time "test" if the mail message has been received on your VM3 machine (from your VM2 machine).
   
   Note: It is important that you don't create this same account name on your vm2 machine, since you want to easily identify the difference between the sending and receiving SMTP servers.
   
   

3. We still haven't set up IMAP (for reading email) but we can test that the message is being delivered. Use the new account in Thunderbird to send an email to firstname@yoursenecaid.org and then check the contents of /home/firstname/Maildir/new/ on your vm3 machine. There should be a file there with the contents of your email.
4. If there is no file, then check the log file /var/log/maillog to see what went wrong.
5. If you can see a file in the /home/firstname/Maildir/new/ directory, then review the procedures on how you got the email server working (since you have performed many steps and set up many services).
6. Refer to the diagram at the top of this lab. Which services have you currently set up? Record your findings in your lab Logbook.

Encountering error messages when sending email
If you cannot properly receive sent e-mail messages, check the /var/log/syslog file for errors.

If you locate an error message in that file such as: Fatal: Error reading configuration: Invalid settings..., then add the following parameter in /etc/dovecot/dovecot.conf:
postmaster_address = DOMAIN (where DOMAIN is actually your domain).

After you have saved those changes, then restart your dovecot service. This problem can also be resolved by properly setting the hostname of your machine to include the domain.

Viewing Received Mail Message on VM3 VIA IMAP (Using Thunderbird)

Finally, we will set up the IMAP server so we can read email. The current way we have configured our mail server on our VM3 machine should allow all the email for anyaccount@yoursenecaid.org should be delivered to our vm3 machine. We will set up Dovecot with IMAP to get easy access to that email.

Perform the following steps:

1. The configuration file for the Dovecot service (which is not the same thing as dovecot-lda) is: /etc/dovecot/dovecot.conf. Modify the protocols option so that Dovecot will work with IMAP connections, no POP3 or LMTP.
2. Start the dovecot service, and ensure it will always start automatically when the machine boots.
3. Use the ss command to confirm the service is listening, and use nc on the host to confirm you can connect to it.
4. Using the information gathered from ss, modify the firewall on vm3 to allow IMAP connections from your local network. Remember to add this to your firewall_restore script.
5. If you can connect - it's now time to do something wrong, that is connect to our IMAP server using Thunderbird over an unencrypted connection.
6. Edit the /etc/dovecot/conf.d/10-auth.conf file and set disable_plaintext_auth to no.
7. Then edit the /etc/dovecot/conf.d/10-ssl.conf file and set ssl to yes.
   
   Note: This combination of parameters will allow your username and password to be sent over the internet in plain text, for anyone interested to look at. In a later lab we'll set up secure SMTP and IMAP connections, for now this is all we have time for.
   
   
8. Restart dovecot so the changes take effect.
9. Try to connect to your IMAP server with Thunderbird by clicking on your Inbox.
10. If nothing happens, then check the Thunderbird Activity Manager for any errors. If the connection is successful, you should see the Trash box appear below Inbox.
11. Finally, send an email message from yoursenecaid@yoursenecaid.org to yoursenecaid@yoursenecaid.org using the Thunderbird application. The mail message should be sent without errors, and you should notice a Sent folder appear in the list. If all worked well, you should see your message arrive in the Inbox and you know that your configuration works correctly.

Backup your VMs!
You MUST perform a full backup of ALL of your VMs whenever you complete your OPS335 labs or when working on your OPS335 assignments. You should be using the dump command, and you should use the Bash shell script that you were adviced to create in order to backup all of your VMs.

Record steps, commands, and your observations in INVESTIGATION 3 in your OPS335 lab log-book

COMPLETING THE LAB

Depending on your professor you will either be asked to submit the lab in class, or online. Follow the appropriate set of instructions below

Online Submission (Peter Callaghan's Classes only)

Follow the instructions for lab 4b on moodle.

In Class Submission

Students should be prepared with all required commands (system information) displayed in a terminal (or multiple terminals) prior to calling the instructor for signoff.

Arrange evidence (command output) for each of these items on your screen, then ask your instructor to review them and sign off on the lab's completion:

✓Status and configuration of your Postfix service on vm2.

✓Proof that you can connect to that service from the host.

✓Your Thunderbird configuration.

✓The email you sent to your myseneca account.

✓Download the labcheck4b.bash checking bash shell script by issuing the command:

wget http://matrix.senecac.on.ca/~peter.callaghan/files/OPS335/labcheck4b.bash

set execute permission and run the shell script on your c7host machine.

• For Peter's classes, follow his Online Submission instructions in Moodle.
• For Murray's classes, run command (piping to the more command) and show output to instructor.

✓Completed Lab4b log-book notes.

EXPLORATION QUESTIONS

1. What is the purpose of the Thunderbird application?
2. List the steps to configure your DNS to allow your Thunderbird application to connect to your mail server.
3. What is the purpose of the Dovecot package?
4. What is the purpose of the mydestination parameter contained in the /etc/postfix/main.cf file?
5. Why are IMAP and POP email servers placed on separate machines (vms)?
6. What is the purpose of the mail_location parameter contained in the /etc/dovecot/conf.d/10-mail.conf file?