OPS335 Email Lab

Basic Mail (Postfix) Setup

This lab will show you how to set up a Postfix email server using a Fedora 17 installed PC.

• You will need at least two systems to do this lab. If for some reason you have not set up your virtual machines, do so before continuing.

Prerequistites
Your hard drive should have Fedora 17, 64 bit Live edition already installed.
Both host and guest should have all software updated.
Ensure the clocks on both machines are set to the correct date and time.

Testing your network

• Start Firefox on your host and authenticate yourself on Senenet with your Seneca account.
• Ensure you can surf the web on your host machine.
• Ensure you can access the web on your VM02 (you can use wget or lynx for that). NOTE: you should not have to authenticate yourself on the guest.

Testing email to the outside world using mailx and sendmail

• Sendmail is installed and running by default on Fedora 17 so there is no need to install it.
• Install mailx on both the host and the guest.

yum install mailx

Warning
When sending email to your Seneca account in this lab, use your old learn address. The server for the new outlook addresses sometimes rejects mail coming from the 142.204 network (this may be fixed by now).

• Test email from the host by sending an email to your Seneca account.

mail -s "PART C3" <Your Seneca email address>

Note: <Your Seneca email address> is your Seneca email address.
Note: after you type in your letter, enter a period in the first column on the last line and hit the ENTER key.

• Check your learn email to see if you got the email. If you did make a note of the return address.
• Test email from the host by sending an email to your Seneca account.

mail -s "PART C4" -r hacker@evil.com <Your Seneca email address>

Note: after you type in your letter, enter a period in the first column on the last line and hit the ENTER key.

• Check your Seneca email to see if you got the email. If you did make a note of the return address.
• Repeat these steps on the guest machine.

Install and configure Postfix

• On both machines do the following:
  • Stop and disable sendmail.

systemctl stop sendmail.service
systemctl disable sendmail.service

• Install Postfix

yum install postfix

• Edit the Postfix configuration file, /etc/postfix/main.cf, and change the following lines:

 mydomain = <senecaID>.org
 myorigin = $mydomain
 mynetworks = 127.0.0.0/8, 192.168.X.0/24
 relay_domains =
 inet_interfaces=all

Warning
Make sure there are no other uncommented copies of these parameters in the file.

• Start and enable Postfix on both machines:

systemctl start postfix.service
systemctl enable postfix.service

Testing mail with the internet

• Test email from your machine by sending an email to your Seneca account.

mail -s "PART C3" <Your Seneca email address>

Note: <Your Seneca email address> is your Seneca email address.
Note: after you type in your letter, enter a period in the first column on the last line and hit the ENTER key.

• Check your learn email to see if you got the email. If you did make a note of the return address.
• If you did not receive the mail, check the mail logs on your machine to determine what the error is.
• Test email from the host by sending an email to your Seneca account.

mail -s "PART C4" -r hacker@evil.com <Your Seneca email address>

Note: after you type in your letter, enter a period in the first column on the last line and hit the ENTER key.

• Check your Seneca email to see if you got the email. If you did make a note of the return address.
• Repeat the steps for 'Install and Configure Postfix' on your Vm 3.

Testing email using IP Addresses

• If you have problems with the following adjust your firewall to allow traffic to/from port 25.
• Try sending an email from vm02 to your host.

mail -s "PART E2" yyyyyy@[192.168.X.1]

Note: yyyyyy is your Seneca ID
Note: the square brackets around the host IP address

• Try sending an email from your host to vm02.

mail -s "PART E3" zzzzzz@[192.168.X.3] 

Note: zzzzzz is your Seneca ID

Test email using host names

For this part make sure that your f17 machine has a correct host name - f17.yourdomain.org. Restart postfix if you change this.

Now try sending mail to yourself on both machines. For example, as <senecaID> on f17, use the command:

$ mail <senecaID>@vm02

the machine will prompt for a subject: enter "testing" without the quotes.

• Now enter the body of your letter. When you're done, enter a period (.) in column 1 on the last line of your letter. This will signal end-of-file and your letter will be mailed. You should end up back at the $ prompt. If you mess up use CTRL-C to cancel the email, DO NOT USE CTRL-Z.

• Use the mailq command on both machines (you will need to be root) to view the mail queue.

Use the mail command to check if you have mail.

Test your configuration and view your logs

• Restart your postfix servers on both machines.
• Check your /var/log/messages file to see that your postfix servers started without error.
• Send some emails from both guest and host to each other and to the outside world.
• Check your /var/log/maillog file to see that your email messages were sent correctly.

Learning the mail command

• Read the mail manual page and learn how it works.

Completing the Lab

1. Create a copy of your main.cf file on vm02 (your guest) with this lab - but delete all commented and blank lines first - like this. [cat /etc/postfix/main.cf | grep -v ^# | awk 'NF > 0 {print $0}']
2. What did changing the relay_domains parameter do?
3. What firewall rule or rules, if any, did you have to enter on the guest and/or host so that email to/from each other would work?
4. What is the meaning of the square brackets surrounding the IP address in the examples?
5. What were the results of sending email between the host and the vm? Show log segments to verify your answers.