Difference between revisions of "Connect to Serial Console from Windows"
| Line 10: | Line 10: | ||
* Installation process was as easy as clicking the downloaded file | * Installation process was as easy as clicking the downloaded file | ||
* After the installation the USB-to-Serial adapter's usb part was connected to the Windows device and the serial part in the Linux device. | * After the installation the USB-to-Serial adapter's usb part was connected to the Windows device and the serial part in the Linux device. | ||
| − | |||
* At this point the Windows issues a COM# (COM3 or COM4) to the adapter (usually at the lower left corner, in the Windows notification center) | * At this point the Windows issues a COM# (COM3 or COM4) to the adapter (usually at the lower left corner, in the Windows notification center) | ||
* Configuration was modified according to [http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01695445/c01695445.pdf this]. | * Configuration was modified according to [http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01695445/c01695445.pdf this]. | ||
| − | |||
* Only difference from the above instruction was in #8, Bits per second (BPS) was set to 115200 instead of 9600. | * Only difference from the above instruction was in #8, Bits per second (BPS) was set to 115200 instead of 9600. | ||
| − | |||
===Cygwin=== | ===Cygwin=== | ||
* Windows executable was downloaded from [http://www.cygwin.com/ Cigwin's website] | * Windows executable was downloaded from [http://www.cygwin.com/ Cigwin's website] | ||
| Line 21: | Line 18: | ||
* "Screen" was the additional package that was added beyond the default package set. (section 2.9 in the above link) | * "Screen" was the additional package that was added beyond the default package set. (section 2.9 in the above link) | ||
===Putty=== | ===Putty=== | ||
| − | |||
| − | |||
* Windows executable was downloaded from [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty' website] (Section: A Windows installer for everything except PuTTYtel) | * Windows executable was downloaded from [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty' website] (Section: A Windows installer for everything except PuTTYtel) | ||
Revision as of 17:51, 8 August 2012
Contents
Connecting to a Linux device via USB-Serial Console from Windows
There are two ways to connect to a Linux device via usb-serial console from Windows:
- Using Putty
- Using Cygwin
Installation and Setup
Both setup requires the installation of the USB-to-Serial/Virtual COM Port (VCP) Driver in the Windows device.
Driver
- Driver for the Windows device was downloaded from Future Technology Devices International Limited's website
- Installation process was as easy as clicking the downloaded file
- After the installation the USB-to-Serial adapter's usb part was connected to the Windows device and the serial part in the Linux device.
- At this point the Windows issues a COM# (COM3 or COM4) to the adapter (usually at the lower left corner, in the Windows notification center)
- Configuration was modified according to this.
- Only difference from the above instruction was in #8, Bits per second (BPS) was set to 115200 instead of 9600.
Cygwin
- Windows executable was downloaded from Cigwin's website
- Cygwin setup was done by following this.
- "Screen" was the additional package that was added beyond the default package set. (section 2.9 in the above link)
Putty
- Windows executable was downloaded from Putty' website (Section: A Windows installer for everything except PuTTYtel)
