OPS235 Lab 2 - Fedora17

OPS235 Lab 2 GNU/Linux Installation - Fedora 13

Objectives

1. To perform a GNU/Linux installation using the Fedora 13 distribution
2. To perform boot time customization and configuration
3. To obtain network configuration from a DHCP server
4. To secure the boot loader by adding password protection
5. To investigate GRUB boot loader configuration

Reference

• man pages
  • mount
  • rpm
  • hostname
  • uname
  • ps
  • ifconfig
  • netstat
  • route
  • nslookup
  • wc
  • grub

• Resources on the web
  • Fedora Release Notes
  • Fedora Installation Guide
  • Protecting Grub
  • Grub Details and Sample Config
  • One-way Hash Function
  • GRUB Tutorial
  • Password Security

Required Material

• Fedora 13 x_64 Installation DVD - You can burn this onto a DVD-R in the Open Lab
• SATA Hard Disk (the same one used for Lab 1)
• USB Memory Stick (minimum 64M)

Prerequisite

• Completion of Lab 1

Introduction

In this lab, you are going to install the Fedora (GNU/Linux Distribution) to your hard disk from DVD.

You need a number of hard disk partitions/physical volumes for this installation: /dev/sda1 (300M), /dev/sda2 extended partition, /dev/sda5 (300M), all created in Lab 1. You will create 4 new physical volumes during this lab.

After the installation, you will collect baseline information about your Fedora GNU/Linux system, do some post installation configuration to prepare your system for the remainder of the labs, manipulate the GRUB configuration, and start using the system.

Instructions

1. Insert and secure your SATA hard disk to the removable disk slot.
2. Power up the computer.
3. Insert the Fedora 13 x86_64 Installation DVD into the DVD drive.
4. Reboot the system.

Investigation 1: How do you install Fedora?

Logical Volume Management
Fedora uses a type of storage management called Logical Volume Management (LVM). In LVM, disk partitions are called Physical Volumes (PVs) and provide storage to a Volume Group (VG). This storage is then split into various Logical Volumes (LVs). The advantage to this scheme is that you can change LV size and you can add and remove PVs after installation. For example, you can add a new disk to your system and then increase the size of your existing filesystems using that extra disk space. Please be careful to enter all LVM information accurately, including the VG and LV names. We will investigate and manipulate LVM in future labs.

Installation Time
The installation process will take about 15 minutes to complete when using DVD. Click the Reboot button on the screen to reboot the system after the installation is complete. There is a post installation setup after boot.

1. After booting from the Installation DVD, at the Welcome Screen choose "Install or upgrade an existing system" to launch the Graphical installation program and select the following options (you can use the media test to verify that your DVD burned correctly -- It will take some time -- otherwise, skip it):
   • Language - English
   • Keyboard Configuration - U.S. English
   • Type of devices: Basic Storage Devices
   • There should only be one storage drive listed - select it
   • If you get a warning that the drive may need to be initialized, it is because your drive is new and contains no partitition table. Select "Re-Initialize"
   • Set your hostname to - f13host (one word, no space, all lowercase)
   • Root Password: enter a password of your own choosing. Pick one that is really, really hard to guess to protect your system. (Recommendation: use the first letter and all the punctuation from a favorite phrase or song verse. For example, "To be or not to be, that is the question!" could become the password "Tbontb,titq!").
   • Disk Partition Setup - Specify a Custom Layout, and then set up the installation with this configuration:
     • Find your existing 300MB partition (/dev/sda1). Edit this entry so that the mountpoint is /boot and is formatted as an ext3 filesystem.
     • Don't touch the other existing 300M partition (/dev/sda5).
     • Create 4 new LVM Physical Volumes that are 25000 MB in size. Set the File System Type to Physical Volume (LVM). Should be /dev/sda6 to /dev/sda9.
     • Create an LVM Volume Group. Set the Volume Group Name to vg_main and set the Physical Extent size to 4MB.
     • Click on the Add button (within the "Make LVM Volume Group" window) to create a logical volume within that volume group:
       • Mount point / (root), filesystem type ext4, logical volume name root, size 90000MB.
   • Say yes to continue without a swap partition.
   • Say yes to format /dev/sda1.
   • Accept Boot Loader defaults.
   • Accept Graphical Desktop and repository defaults.
2. Proceed with the installation. Note how long it takes to perform the installation.
3. Reboot using the controls on the screen. When the system starts, it will ask you some final configuration questions.
   • Check the License Agreement. What license is used for the Fedora distribution? What activities do have restrictions and obligations?
   • Create a user account for yourself using the same name as your learn account.
   • Set date and time. Normally, you would want to enable Network Time Protocol, but since we will be experimenting with the networking turned off in later labs, leave it disabled.
   • Click on Do Not Send Hardware Profile.
   • Finish the post-installation customization, wait for the login screen to appear, and then login to your Learn account.

Answer the Investigation 1 question in your lab log book.

Forcing the Resolution on the Projector
The podium computers in the lab rooms are connected to a video splitter. This splitter then connects to both the LCD screen on the podium and the projector at the front of the room. However, the splitter prevents the computer from successfully querying the LCD or screen to find the supported resolutions, and Fedora therefore selects a very low (safe) resolution. If you are using a podium system, you can force the native 1680x1050 resolution of the LCD display using this script.

Investigation 2: How many files packages and files are installed on the system?

For the rest of the tasks in this lab, you must login to your system using your Learn account and execute all commands under your learn account. If you get a Permission Denied message when trying to execute a command, then switch to the superuser account by running the command su - and type in the password for "root". Once the intended command is executed, type "exit" to exit from the superuser account and return to your regular Learn account.

Record the commands used and the output generated in each of the following steps:

1. To find all the mount points, enter the command: mount
   • Study the output and record all the mount points in your log book.
2. The name of the installation log file is /root/install.log -- It is an ASCII file (how can you be sure?) and can be viewed with the less command.
3. You can make use of this file to determine how many packages have been installed: complete the following command to count the number of packages listed in the installation log file:
   • grep ________________ /root/install.log | wc -l
4. Using the rpm command: you can also use the following commands to list all the installed packages, and the total number of packages installed:
   • rpm -q -a
   • rpm -q -a | wc -l
   • rpm -qa | wc -l
5. The -q option means query, and the -a option means all (in other words, query all installed software packages). Did you get the same number of packages from the above two methods?
6. Some of the files on your system were installed with the software packages, and some were created by system activity (for example, by creating your Learn account and by logging in). If you know the package name (from the install.log), you can list all the files that were installed from the package by using the following command:
   • rpm -q -l package_name
7. This combines the -q (query) option with the -l (list filenames) option.
8. You can pipe the outupt through wc -l to count the number of lines:
   • rpm -ql package_name| wc -l
9. Using what you learned in steps 3 and 4, get a count of the total number of files installed by all of the software packages on your system.
10. To find out the name that you have assigned to your Linux system, enter the command: hostname
11. To find out the kernel version of your GNU/Linux workstation and the date it was created, enter the command: uname -r
12. To find out all the system processes running on your GNU/Linux workstation, enter the command: ps -ef
13. To capture the list of all the system processes to a file called ps.lst, enter the command: ps -ef > ps.lst
14. Copy the installation log file /root/install.log and the file ps.lst to a USB memory key, or scp to your matrix account as a backup.

Updating Fedora
The Fedora 13 software is updated frequently to add features, fix bugs, and upgrade security. Perform a system update to get the latest versions of the packages installed in Fedora: Start the Firefox web browser, turn off popup window blocking (select Edit>Preferences, then select the Content tab and uncheck the box to Block Popups), then login to SeneNET. Open a terminal and type su to start a shell as root. Enter the command yum update This will download and install all of the packages that have been updated since the installation DVD image was created. If you complete this command at Seneca it should run quite fast as Seneca College hosts a Fedora Repository mirror (a copy of all of the current fedora packages, on a local web server).

Investigation 3: What is a runlevel?

After the kernel boots, it starts a single program, called init. A running instance of a program is called a process -- the init process always has a process ID (PID) of 1. All other processes on the system are started by init, or they are started by processes started by init.

Most current Linux systems use some variation of the init system originally developed for Unix System V (called "sysvinit") or a newer version called "upstart".

These systems employ the concept of "runlevels" -- groups of software that can be selected, so that the system can be run in various modes. In Fedora systems, these runlevels are used:

Runlevel	Description
0	Halt (powers off the system)
1	Single-user maintenance mode, network not running, character-mode display
2	Not normally used - originally meant: Multi-user mode, network not running, character-mode display
3	Multi-user mode, network running, character-mode display
4	Not normally used
5	Multi-user mode, network running, graphical user interface
6	Reboot

Different runlevel systems
Various Linux distributions may use the runlevel numbers differently. For example, on some Debian/Ubuntu systems, the default (standard) runlevel is 2.

In order to implement runlevels, init uses a configuration file and a number of script files:

• /etc/inittab is the configuration file, which sets the default runlevel.
• /etc/rc.d/init.d is a directory of scripts.

In order to determine which of the startup scripts should be executed in each runlevel, the one directory per runlevel is created (/etc/rc.d/rcX.d, where X is the runlevel). This directory is filled with symbolic links to the startup scripts in /etc/rc.d/init.d

1. To find out the value of the runlevel your GNU/Linux system goes into after boot, enter the command: grep initdefault /etc/inittab
2. You should get a single line containing ":" as the field delimiter. The second field stores the value of the runlevel the init process will use after a reboot. Record the output in your log book.
3. A list of processes that should be running at a given runlevel can be found in the directory /etc/rc.d/rcX.d where X is the runlevel. Do a directory listing of that directory and study what files are in there. Pay attention to the first three characters of each file name. They have special meaning to the system. Record your observation in your log book.
4. Make a backup of the file /etc/inittab with the command: cp /etc/inittab /etc/inittab.original
5. Edit the file /etc/inittab and change the default runlevel to 3. Save the change and reboot your system.
6. After the reboot, you should get a "Text Login Screen". Login with your Learn account and type startx at the command prompt. Describe what happens in your log book.
7. Enter the command: runlevel -- this shows the previous and current runlevel. Record the values in your book.

Answer the Investigation 3 question.

Investigation 4: What is the network configuration?

1. To check the network configuration settings obtained from the DHCP server, run the following commands, describing the output in your log book:
   • ifconfig
   • route
   • netstat -rn
   • nslookup (at the > prompt, enter the word "server" (do not type the quotes) and record the output. Type exit to leave nslookup).
2. Find the following information in the output of the above commands:
   • MAC address (physical or hardware address) of the ethernet network interface
   • The IP address (logical address) assigned by the DHCP server
   • The default route (gateway)
   • The DNS nameserver

Answer the Investigation 4 question.

Investigation 5: How do You Secure the Grub Boot Loader?

Duplicate UUIDs
Before proceeding, use the mount command to check to see which filesystem is mounted on the mount point /boot. If it is /dev/sda5, it is the wrong filesystem. This may be caused by a duplication of serial numbers which is the result of Lab 1; you can fix this problem with this series of commands:

mkdir /media/sda5 /tmp/sda5-files
umount /dev/sda5
mount /dev/sda5 /media/sda5
cp -v -R /media/sda5/* /tmp/sda5-files
umount /dev/sda5
mkfs -t ext3 /dev/sda5
mount /dev/sda5 /media/sda5
cp -v -R /tmp/sda5-files/* /media/sda5
rm -rf /tmp/sda5-files
mount -a

By default, the Grub boot loader allows anyone with access to the computer at boot time to set the runlevel, or change the boot parameters, which can allow them to influence the init process and which kernel image is loaded. Anyone with access to the boot prompt can therefore bypass security controls and control which software is loaded. For example, rebooting to runlevel 1, known as single user mode, gives the user root priveleges without the need for a password! Obviously, giving a non-administrator this much control can be dangerous, and it is wise to protect the boot loader with a secure password.

We will need to choose a password, encrypt with the grub programs hash utility (called md5crypt), and add the encrypted hash of your password to the grub configuration file, /etc/grub.conf

Do not lose the GRUB password
If you lose the GRUB password you will not be able to change boot parameters when you boot the system. If you need to write it down, put it in a safe place, where no one will be able to tell what it is for.

1. Choose a suitable password.
2. Open the grub program by typing the command: grub
3. At the grub prompt, type in the command: md5crypt
4. When prompted for a password, carefully type in your password. The program will display the encrypted hash of your password. Carefully write down that encrypted hash generated by the program.
5. Type the command: quit to exit the grub program.
6. Open the grub configuration file, /etc/grub.conf for editing. (This file is actually linked to /boot/grub/grub.conf).
7. Carefully add the line: password --md5 password-hash (note: password-hash is the hash you generated with md5crypt) Place this line between the splashimage line and the title line. If there are other lines there, there is no need to remove them. Just insert your password line as a new line.
8. Make sure you have not made a mistake. What you type in must match exactly the output from the md5crypt command.
9. While you are editing the file you should also increase the timeout for grub to automatically boot the default OS. Edit the line timeout=0 to timeout=5 to give us more time to interrupt the process.
10. You should also ensure that the grub boot menu is not hidden. Add a hash sign (#) to the start of the line which reads: hiddenmenu
11. Save the file and exit. Your Grub boot loader is now password protected.
12. Find the section of this article that explains how to change the runlevel at boot time, and read it. Reboot your system, trying to change to runlevel 1 from the boot prompt, and see if the password protection worked.
13. From now on, when you want to change boot parameters when you boot, you must type lowercase p at the boot prompt and enter the required password.

Completing the Lab

Check off the following items before asking your instructor to check your lab:

• Task 1 - Install GNU/Linux Workstation using Fedora
• Task 2 - Collect system information after installation.
• Task 3 - Customize and configure boot time environment
• Task 4 - Collect network information
• Task 5 - Password protect Grub Bootloader

Arrange evidence for each of these items on your screen, then ask your instructor to review them and sign off on the lab's completion:

• Grub is password protected.
• Can login with your "learn" account name
• Has all the mount points
• Has the package count
• Has edited the default runlevel
• Has the correct IP address and MAC address
• Find out the default route (gateway)
• IP of the DNS name server
• Name and contact information on your disk pack

Runlevel
Feel free to change your default runlevel to 3 or 5 according to your own personal preference. Note that later labs may assume a particular runlevel.

Preparing for the Quizzes

1. How many packages were installed?
2. How many files (correct to the nearest hundred) were installed?
3. How many mount points were used?
4. How many users were created automatically on your system (do not count your learn account)?
5. What is your learn account's UID and GID?
6. What is your learn account's home directory?
7. What is the home directory for the user "root"?
8. How do you determine the host name of your GNU/Linux workstation?
9. What command can display the NIC's MAC address?
10. Which file contains the default "runlevel" value for your GNU/Linux workstation?

Unbind your MAC address
Before moving your disk pack to another system, unbind your MAC address.