Processingjs gamepaper

Processing.js for Web base Games

Introduction

Games delivery requires fast, highly graphical, interactive, multimedia environment. To accomplish this game delivery on a web page, have traditionally required some sort of browser plug-in. However due to security concerns and general wariness about plug-ins, delivering content/games that require a plug-in is a barrier to access for some users. Furthermore, browser plug-ins are not available on browsers for all platforms. Even Flash, which is one of the most ubiquitous visual interactive environments, is not available for every browser. The solution for cross browser, cross platform delivery of rich graphics in an interactive environment is to integrate it into native browser technology.

The HTML5 <canvas> element, standardized in ...(find citation) allows the programmatic delivery of graphics in a web page without plug-ins. With its inclusion in the soon to be released IE 9, the <canvas> element now represents a means to deliver graphical content in all the major browsers without the use of any plug-ins. The typical way to draw on the canvas is to use JavaScript. However for artists, educators, and other people less familiar with JavaScript, learning to do this can be a barrier to entry.

The Processing language introduced by Ben Fry and Casey Reas is a simple and elegant language for data visualization that is already used by artists, educators as well as commercial media to deliver rich graphical content called sketches. There is a large body of work around the world which is being developed using Processing. However, Processing was developed in Java and thus delivering Processing sketches on a web page required that the user install a Java plugin. Furthermore the sketches themselves are self contained items as opposed to being part of a web page. That is, the elements of the Document Object Model (DOM) of a webpage can not interact with it or vice versa. Thus, while it is possible to deliver visual content it would be difficult to create Processing sketches to take full advantage of modern web services such as flickr, twitter etc.

Processing.js is an open source, cross browser JavaScript port of the Processing language. It uses the canvas element for rendering and does not require any plug-ins. However, Processing.js is more than just a Processing parser written in JavaScript. It also enables the embedding of other web technologies into Processing sketches. This extension will allow for a new set of visualizations previously not possible. Processing.js seamlessly integrates web technologies with the processing language to provide a framework for multimedia web applications.

Background

The processing.js project was started by John Resig who wanted to utilize the HTML5 canvas element and take advantage of the Java Processing language. It took about seven months to get a working version, consisting of 5000 lines of code but it was not a complete port of the Processing language. The project, similarly to other open source products, was released with the hope that a developer community will converge around it and contribute to development. In September 2009, we began the work to complete the port to JavaScript. In order to facilitate an architecture for participation the source code had to be readily available and the inner workings of the project and the missing functionality must be publicized. To this end the source code was made available publicly on GitHub and an issue tracking system was used to manage the large number of issues needed to be resolved in order to complete the port. A review process was setup to ensure that the code submitted was of sufficient quality.

From it's inception, Processing.js was designed to be more than just a rewrite of the Java functions provided by Processing to JavaScript. John Resig wrote the original Processing.js parser to scan a Processing sketch for hints of Java code and convert that code to JavaScript. However, if the parser encountered JavaScript code, it would leave the code intact. This method allowed not only for the conversion of existing Processing code to JavaScript but the injection of JavaScript into Processing sketches as well. By allowing JavaScript to exist within a Processing Sketch intact,Java and JavaScript code can exist together without any need to declare the language you are using. Old sketches written for Processing will work but new sketches written for Processing.js can not only have Processing code but can make use of JavaScript to interact with other elements of the webpage.

JavaScript

When the original Processing Language, also known as P5, was first developed, Java was supposed to become the language of the web while JavaScript was client-side scripting language for small tasks. As the web matured, JavaScript, however, became the language of the web, although many of the misconceptions about it still persist. /*cite javascript the good parts here*/ With recent developments in JavaScript technology, JavaScript is now fast enough to handle the demands of realtime interactive web graphics.

Processing.js is more than just a Processing parser re-written in JavaScript. It is designed in a way that connects the Processing language (also known as P5) with web technologies such as JavaScript, the HTML5 canvas element, JQuery, and various web services. /*Awkward*/ Furthermore, Processing.js is built in such a way as to allow easy integration of new technologies as they emerge. It is designed to be fast and to take advantage of recent JavaScript developments to ensure that the platform is responsive.

While JavaScript and Java are fairly similar syntactically, there are some fundamental differences that has made this conversion challenging. The first is that we wanted to do this conversion dynamically in real time. The code produced by the converter??? needed to be fully object oriented and we had to provide support to all native Java functions and objects that are supported by Processing. We also had to take into account the differences between working with web resources vs local resources. Furthermore we had to consider how we would handle some fundamental differences between Java and JavaScript such as typed vs. typeless variables, function overloading and variable name overloading.

The original code for Processing.js used regular expressions to convert Java into JavaScript when it was encountered. It did this by scanning for hints of Java code within the entire sketch and then replaced the Java code with its JavaScript equivalent. Due to the difference in how Java and JavaScript accessed object properties from methods inside an object, the with statement was used as a simple solution to avoid having to prepend all function calls with "this." or "Processing.". However, the use of the with statement also meant that the JavaScript generated would fall off Trace /*cite trace paper here... do we need to talk about trace in the back ground section???*/ making the code run slower than it needed to in some browsers. Later this method of scanning the entire sketch was replaced by the creation of an abstract syntax tree that broke up the code into smaller pieces. Each piece then had the regular expressions applied to change it. This made it was easier to apply the regular expressions correctly without accidentally converting code that was already working. It also made it easier to create proper inheritance structures and attach properties and methods to the correct object in the hierarchy chain as smaller pieces of code was being converted at any one time.

Browser Unification

One important feature provided by Processing.js is that it hides the differences between browsers. Web standards are often loosely defined, and thus variations can exist. These variations not only exist between different browser vendors but can even exist between versions of the same browser on different platforms. Something as simple as key events can vary widely between browsers. Processing.js hides a large number of these differences from the user by creating a unified method of handling events. Regardless of the browser/platform, the functions for handling events within Processing.js are handled the same way.

Different browser makers are also at various stages of implementation for various newer technologies. For example, WebGL provides typed arrays which are much faster than traditional JavaScript arrays. While these typed arrays are implemented for WebGL, they can be used outside of that context also and can provide tremendous speed improvement. However, not every browser supports WebGL at this time thus a fallback to regular JavaScript arrays is necessary if the feature does not exist.

By hiding these differences between browser makers from the user, Processing.js provides a means for game developers to make games without worry about the differences between browsers. If a feature exists that can make the rendering smoother and faster, Processing.js will make use of it to increase performance. If it does not exist a fallback mechanism is available to allow it to still run.

3D support

The introduction of the <canvas> tag into the HTML5 specification allowed Processing to be ported to JavaScript, thus enabling users to run 2D sketches within the browser without additional plug-ins. At the time when porting began, there was no plug-in free method of delivering 3D content. This limited Processing.js to its 2D functions. WebGL, A JavaScript API that is based on OpenGL ES 2.0, is now being implemented by Firefox, Chrome and Safari. It is has become a viable candidate for use in Processing.js to render 3D sketches. Additionally, since WebGL closely matches OpenGL which is used by Processing, the porting of the 3D Processing functions was relatively straight forward.

Differences between OpenGL and WebGL

The matter of porting Processing (which uses OpenGL /*1.x?? if it was opengl 2.0 it would have been even easier right?*/) was simplified because the WebGL interface is similar that of OpenGL, but there are a number of differences between the interfaces. The single largest difference between WebGL and OpenGL 1.x is that like OpenGL ES 2.0, the fixed-function pipeline was been removed. Because of this, user-defined vertex and fragment shaders were necessary for lighting operations. Since some shapes in Processing aren't lit and others were, multiple shaders were written. One shader exists for lit objects such as boxes and spheres, another less complex shader was written for unlit objects such as lines and points.

The following shaders are used for rendering unlit shapes specified with begin/end function calls.

"varying vec4 vFrontColor;" +
"attribute vec3 aVertex;" +
"attribute vec4 aColor;" +
"uniform mat4 uView;" +
"uniform mat4 uProjection;" +
"void main(void) {" +
"  frontColor = aColor;" +
"  gl_Position = uProjection * uView * vec4(aVertex, 1.0);" +

"}";

fragment shader:

ifdef"GLfESf GL_ES\n" +
"prehighpn highp float;\n" endif"#endif\n" +

"vvecinvFrontColorntColor;" +
"void main(void){" +glrFragColoragCvFrontColorntColor;" +
"}";

Typed Arrays

Performance is always a concern when rendering 3D content, so it was necessary to create a faster version of JavaScript'script's inherently slow arrays types. Because of this, typed arrays were incorporated into pre-release versions of WebGL browsers. Unlike regular arrays which can contain different types such as strings, numbers and objects, typed arrays can only contain one type and cannot by dynamically resized. Some of these types include Float32Intay, Int32Uinty, Uint16ArrUintnd Uint8Array. These types provide a significant performance increase when manipulating arrays.

(table removed)

Operation	Array	Float32Array
Write	8947	1455
Read	1948	1109
Loop-copy	>10, 000	1969
Slice-Copy	1125	503

Win7 64Bit, 4GB Ram, Dual-Core 1.30Ghz Intel U7300 (citation needed)

Alistair MacDonald

link

Because typed arrays are only available for pre-release browsers, they cannot currently be used in 2D sketches. Once they become implemented in browsers, a significant amount of the Processing.js code base can make use of these structures, increasing performance throughout the library.... /* andor, mike said its in... is it???*/