OPS235 Lab 5 - CentOS7

LAB PREPARATION

Purpose / Objectives of Lab 5

The purpose of this lab is to discuss how a Linux sys admin can manage partitions including adjusting the size of their Linux systems if space is required.

Main Topics:

• Using LVM to resize partitions graphically and via commands.
• Create, partition and format virtual hard disks to increase the size of a file system.
• Manually Connecting and Disconnecting Directories to existing partitions (mount, umount).
• Monitoring Disk Space (df -h).
• Create a Bash Shell Script to monitor and report low disk size (run periodically in crontab).

Minimum Required Materials

Removable Hard Disk Pack (SATA)

USB key (for backups)

Lab5 Log Book

My Toolkit (CLI Reference)

LVM Information: vgs pvs lvs vgdisplay pvdisplay lvdisplay

LVM Management system-config-lvm lvextend lvcreate lvreduce pvcreate vgextend

Miscellaneous mount umount df fdisk mkfs

INVESTIGATION 1: Adjusting File System Sizes with LVM

VM Backups and Recovery Most of these investigations will take place in your virtual machines. If you make a significant mistake, your virtual machine may not boot. Remember that you created backups of your virtual machines in Lab 2, and you can restore them if something goes wrong. Remember: if you did not create backups for all of your VMs, then you don't have any restoration points to fall-back to!

Monitoring and ensuring adequate space for a Linux file-system is considered to be an important task for a sys admin. An application called LVM is a very useful tool for Linux system adminstrators.

LVM (Logical Volume Management) is used to manage hard disk drives / partitions for Unix/Linux systems. LVM provides more flexibility than just working with hard disks / hard disk partitions. Volume Groups are areas used to define Physical Volumes (i.e. hard disks, disk partitions, or other forms of storage devices). Logical Volumes are then used to relate directories (mount points) to a specific physical volume or for a "range" or "span" of physical volumes.

Therefore, LVM allows more flexibility and growth potential for Linux systems (for example, having Logical volumes span multiple hard disks). CentOS uses LVM by default upon installation. Other Linux distributions may provide the capacity to install LVM, or later install and then use Logical Volume Management.

Part 1: Manage LVM Graphically

The system-config-lvm application allows the Linux administrator to manage LVMs Graphically.

1. Let's learn to administer (manage) our LVM graphically for our centos2 Virtual Machine.
2. CentOS provides a tool called system-config-lvm to graphically administer LVM. Install the system-config-lvm application by issuing the command: yum install system-config-lvm

3. Open a shell as root and run the command: system-config-lvm
4. On the left-hand side, you can click on the Volume Group, Physical Volume and Logical Volumes and view their properties on the on the right-hand side.
5. Determine the current LVM configuration by clicking on the appropriate element and reading the properties in the right-hand panel -- write down the answers:
   1. What are the names and sizes of the Volume Group?
   2. What is the name and size of the Physical Volumes?s
   3. What are the names and sizes of the Logical Volumess?
   4. Is there any space in the VG which is not allocated to a LV?
6. Perform the following steps in this application to increase the size of the home file-system to 4 GB:
   1. On the left-hand side, click on the Logical Volume containing the home file-system.
   2. Click on Edit Properties.
   3. Change the size to 4 GB and click Ok.
   4. Verify that the home file-system has increased in size.
7. Create a new 3G LV (LV Properties: linear) containing an ext4 filesystem named: lv_archive and mount it at: /archive
8. Let's see what happens when we copy data over to lv_archive, and then reduce the size of lv_archive. Complete the following steps below:
   1. Issue the following command: cp -R /etc/* /archive
   2. Shrink the size of lv_archive to 1 GB. What happens?
   3. If you could not shrink the size of lv_archive, what do you think is the cause for the problem?

Answer Part 1 observations / questions in your lab log book.

Part 2: Managing LVM Via Command Line

Let's say that you have run out of disk space on your centos3 VM, you need more space on the root file-system, perhaps to host more webpages or a larger database or new software. What are your options? Getting a replacement hard-drive would probably require re-installation of the operating system and backup/restore of the data.

Because we're using LVM we can avoid this problem. We can add a new hard-drive (which will serve as a physical volume) to the volume group, and extend the root logical volume to make use of the new available space.

Perform the following operations to increase the size of lv_root in centos3:

1. Perform this Part in your centos3 VM.
2. Run the following commands and make note of the output:

ls /dev/vd*

pvs

vgs

lvs

df -h

3. Open the centos3 virtual machine Details view.
4. Go to the hardware details view
5. Click Add Hardware and add a new storage device of 2GBs, make sure it's a VirtIO disk.
6. Go back to the console view
7. Issue the command: ls /dev/vd*, what has changed?
8. Now we'll make the new device as a physical volume, add it to the volume group, and extend lv_root:

pvcreate /dev/vdb

vgextend vg_centos3 /dev/vdb

lvextend -L +2G -r vg_centos3/lv_root

9. Now rerun the ls /dev/vd* , pvs , vgs , lvs and df -h commands. What has changed and what caused those changes?
10. Among the changes, note that your root file-system is now 2GB bigger - and you have not even rebooted your machine!

!! increase & shrink LV via command line!!

Answer Part 2 observations / questions in your lab log book.

Part 3: Manually Creating, Formatting Partition & Add to an Existing Volume Group

1. Add an additional 2 GB virtual disk to your centos1 system, we will use it as an additional physical volume.
2. Do the rest of this investigation in the command line.
3. You should now have both /dev/vda and /dev/vdb.
4. Record the size of the volume group and the amount of free space (Hint: use a command that you learned in a previous lab).
5. Read the resource Partitioning with fdisk to learn how to properly create a partition with the fdisk command.
6. Use fdisk to partition /dev/vdb with a Linux single partition that fills the whole disk.
7. Check the messages printed when fdisk exits -- you may need to reboot the system in order for the new partition table to take effect.
8. Mark vdb1 as a physical volume usable by LVM.
9. Add the new physical volume to the existing volume group.
10. Verify that the volume group is larger and has more free space.

Think!
The next part of this investigation requires some research, thought, and creativity.

Using that additional space, create a separate filesystem for /home:

1. Create the logical volume lv_home (1G ext4)
2. Find a way to move the contents of /home onto it.
3. Change your system configuration so that the new filesystem is mounted on /home from now on.

Answer Part 3 observations / questions in your lab log book.

INVESTIGATION 2: Mounting / Un-Mounting File-systems & Monitoring Disk Space

We take for granted that a file-system must be mounted (for example the root partition) in order for a Linux system to be usable upon system start-up. The /etc/fstab (file system table) contains entries to mount various file systems automatically upon start-up of the Linux system.

The Linux sys admin also has the ability to manually mount (connect) and un-mount (disconnect) partitions in order to perform maintenance on the file system (for example un-mounting the /home partition to install software and prevent users from logging in during that process).

We will now learn how to perform these operations (including monitoring of disk space usage) in Part 1.

Part 1: Mounting and Un-mounting Partitions

1. x

Answer the Part 1 observations / questions in your lab log book.

Part 2: Monitoring Disk Space

1. x

Answer the Part 2 observations / questions in your lab log book.

INVESTIGATION 3: LOOKING AHEAD

Automating Routine Tasks (Shell Scripting and Using Crontab)

Bash Shell Scripting Tips: Using awk to Manipulate Text: x Scheduling Tasks: crontab: x </div>

We will now use shell scripting to help automate the task for a Linux adminstrator to create regular user accounts.

1. Download, study, and run the following shell script. Issue the command:
   wget https://scs.senecac.on.ca/~murray.saul/monitor-disk-space.bash
2. Try to understand what these Bash Shell scripts do, and then run the script as root.

Setup crontab

Answer Investigation 3 observations / questions in your lab log book.

LAB 5 SIGN-OFF (SHOW INSTRUCTOR)

Time for a new backup!
If you have successfully completed this lab, make a new backup of your virtual machines. Remember to also make a backup of the new second virtual disk drive on centos1 -- you now have two virtual disks on centos1, and therefore two image files, and therefore will need two backup files.

Arrange proof of the following on the screen:

✓ x

✓ x

✓ x

✓ x

✓ x

Preparing for the Quizzes

1. What is a VG? PV? LV?
2. What is the total size of the "main" VG on your system?
3. How do you create a LV?
4. How do you delete an LV?
5. How would you add the disk partition /dev/sdb7 to your volume group "main"?
6. How would you increase the size of the root filesystem by 50 MB?
7. What is the purpose of /etc/fstab?