Changes

Have a lot of fun...

student@matrix:~>

* Type the command

raymond@matrix:~> uname -a

depends:

srcversion: 16DCEDEE4B5629C222C352D

* Try the command "/sbin/modinfo" on each of the module listed and determine which one is the device driver for the network interface card. Record the location (filename) of the device driver of the network interface card. If you have to type the command for each module by hand, it may take you quite a while. If you know shell scripting, you can write a small shell script to automate the process and save a lot of typing.

* To display basic networking settings on a Linux system, type the command "/sbin/ifconfig" and record the output for later use:

* From the output of the /sbin/ifconfig, you should be able to determine the IP address, network broadcast address and network mask of your host's TCP/IP network settings. In the above sample output, "eth0" is the actual network device, and "lo" is the logical loopback network device. There are a few other fields which are import in troubleshooting networking problems. Consult the "man" page for details.

= Questions =

= Completing this Lab =