OOP344 Assignment One

OOP344 - OOP344 Student List - OOP344 Teams - OOP344 Assignment One - OOP344 Assignment Two - OOP344 IRC Schedules
- OOP344 Student Resources
As your first assignment this semester, you are to write a multi-platform direct terminal library and later use that library to create a text editor. Assignment One is done individually! Each student must complete and hand her/his own work, no collaboration permitted for this part.

Console Input Output Library

Due date

Due date: Thursday October 15, 2009, 23:59

File Names

Save your work in ciol.h for the header file and ciol.c for the source of the library.

Basic Console Input Output

You are to write a program that places characters at various positions on a screen using a direct terminal library module. Your library module is named io and contains the following functions:

Specifications

void io_init(void)

Initializes the io routines. Your application calls this function before calling any other io function and only once before calling io_end().

void io_end(void)

Shuts down the io routines and ensures that the cursor is not left in the middle of the screen, which may be partly filled with characters. Any application that has called io_init() should call this function before terminating.

int io_rows(void)

Returns the number of rows on the screen.

int io_cols(void)

Returns the number of columns on the screen.

void io_clrscr(void)

Clears the screen and leaves the cursor in the upper left-hand corner of the screen.

void io_flush(void)

Ensures that any output sent to the screen is displayed on the screen (that is, this function flushes the output buffer).

int io_getch(void)

Returns the virtual key code identifying the key pressed by the user. This function first displays all output that has been sent to the screen (if any is pending to be displayed), waits for a key to be pressed and returns an int value that uniquely identifies the key pressed. To accommodate platform dependency, define the following symbolic names for the non-ASCII keys in each platform:

• UP_KEY - the up arrow key value,

• DOWN_KEY - the down arrow key value,

• LEFT_KEY - the left arrow key value,

• RIGHT_KEY - the right arrow key value,

• PGUP_KEY - the Page Up key value,

• PGDN_KEY - the Page Down key value,

• HOME_KEY - the Home key value,

• END_KEY - the End key value,

• ENTER_KEY - the Enter key value,

• TAB_KEY - the Tab key value,

• BACKSPACE_KEY - the Backspace key value,

• ESCAPE_KEY - the Escape key value,

• DEL_KEY - the Delete key value,

• INSERT_KEY - the Insert key value,

• F1_KEY to F12_KEY - the function key value,

You must use platform specific and unique non-ASCII values for the keys, and then you must use these specific symbolic names in your definitions.

void io_move(int r, int c)

Positions the cursor at row r and column c, where row 0 is the top row and column 0 is the leftmost column. If either parameter is invalid, your function has undefined results. Your function does not flush any output buffer.

void io_putch(int c)

Displays the character c at the current cursor position and advances the cursor by one position to the right. If the cursor is already at the rightmost column of the screen, the advance is system dependent. This function does not flush any output buffer.

void io_putstr(const char *s)

Displays the null-terminated string pointed to by s starting at the current cursor position. Your function leaves the cursor just after the last character displayed. If the string exceeds in length the available space on the current line of output, your function has undefined results. Your function does not flush any output buffer.

void io_display(const char *str, int row, int col, int len)

Outputs the null-terminated string pointed to by "str", on the screen starting at row "row" and column "col" on the screen, upto "len" characters. As with io_move(), 0 is the top row, and 0 is the leftmost column. If the string is longer than "len", then only "len" characters are displayed, but if it is shorter than "len", then the entire string is displayed left-justified in the field. However, if "len" is 0 or less, then the field length is considered to be the actual length of the string (i.e. the entire string is displayed). Afterwards, the cursor is positioned after the last character of the field. (Note that on systems where output is buffered, this function should not flush the output buffer). The results are undefined if the specified values indicate a field that does not fit on the screen.

Line and Selection Editor

Line Editor: int io_edit(........)

int io_edit(char* str, int row, int col, 

            int fieldlen, int maxdatalen, int *insertmode, int *offset,

            int *curpos, int IsTextEditor)

Allows the user to perform full screen editing of the null-terminated string pointed to by "str". The parameter "row" identifies the row of the screen for the field (0 is the top row), while "col" indicates the starting column of the field (0 is the left-most column). The parameter "maxdatalen" specifies the maximum length of the string "str". The parameter "fieldlen" specifies the length of the field in which editing is to be performed (visible area of “str”). The pointer "offset" points to an integer, holding the index of the first character of "str", shown in the field. The pointer "curpos" points to an integer holding the position of the cursor in the field (0 is the first position). "insertmode" is a pointer pointing to an integer flag, that is true (1) for insert mode being on, or false (0) for insert mode being off.

If any of insertmode, curpos or offset is NULL then a local integer variable will be used instead. If local variables are used for any of insertmode, curpos, or offset, the default values are: 1 (insertmode), 0 (curpos), and 0 (offset)

Editing begins with the display of "str" from where "*offset" is referring to, and the cursor will be standing at the position which "*curpos" is indicating. NOTE: Following corrections should be done to "*curpos" and "*offset" in case they hold invalid values before editing begins:

1. Set the "*curpos" so that cursor stands at the last position of the field if it exceeds fieldlen.
2. If "*offset" is greater than the length of the string, set the "*offset" so the “last character of str” is hidden right before the first space in the field. (See IsTextEditor for more)
3. After the above, if cursor is past last character of “str” set "*curpos" so the cursor stands right after the last character of "str".

The cursor is never allowed to move before the start of the field, more than one position past the last character in the string, or after the end of the field.

Editing is terminated by pressing ENTER, TAB, UP, DOWN, PGUP, PGDN or any of the function keys (F1 to F12). Pressing ESCAPE will terminate the io_edit(), and abort editing; "str" will contain orinally passed data when leaving function.

Note that the conditions of termination are changed if “IsTextEditor” flag is true (non-zero). See “IsTextEditor” section for detail.

The function returns an int identifying the key that was pressed to exit. (This function uses the same key codes as io_getch())

The function takes no action if the user tries to enter too many characters (if, for example, the string is full in insert mode, or the cursor is positioned after the last character of a full string in overstrike mode). However if cursor reaches the end of the field and the string is not full then after inserting the character string will be scrolled to left, positioning the cursor right after the last character in the string.

The function handles at least the following special keys:

• LEFT - move cursor left one character. If cursor is at the beginning of the field and there is hidden data before the cursor, then shift string to right instead.
• RIGHT - move cursor right one character. If cursor is at the end of the field but not at the end of the string, then scroll one to left.
• HOME – move cursor to the beginning of the string. Scroll all the way to right if necessary. (i.e. if there is hidden data at the beginning)
• END - go to the end of the data in the string, i.e. just past the last character in the string. Scroll all the way to left if necessary.
• INSERT - toggle Insert/Overstrike mode
  In Insert mode, printable characters are inserted into the string, moving the remainder of the string to the right to make room. In Overstrike mode, printable characters overwrite existing characters (if any). Note that if you are past the end of the string, printable characters are appended to the string (as long as the string isn't full) regardless of the mode. Also note that, regardless of the mode, the cursor advances as printable characters are typed into the string. Finally, if the cursor is at the end of the field, instead of moving to right, the characters are shifted to left.
• DEL – eat the current character above the cursor and move all subsequent characters one position to the left.
• BACKSPACE - move the rest of the field (including the cursor) one position to the left, eating the previous character.
• TAB:
  • if IsTextEditor is false, TAB will simply terminate the function like a Function key
  • if IsTextEditor is true, TAB will insert CIO_TAB_SIZE number of spaces into the string. CIO_TAB_SIZE should be a defined "tab size" value in ciol.h. If CIO_TAB_SIZE spaces cannot be inserted into the string for any reason then the inputted tab should be ignored. (See below for more about IsTextEditor flag)

IsTextEditor:

If IsTextEditor is true, then it means that the function is being used to edit a text by editing one line of the text at a time. In this case, shifting a line to the left or right should not only cause the editing line to be shifted, but also the rest of the lines in the text. To do this, io_edit should let the calling function take care of shifting instead of doing it by itself. Since shifting essentially means modifying “*offset” when “IsTextEditor” is true, and that there are times when you find that “*offset” needs to be modified, you should terminate the function instead. With termination, the function should return the terminating key.

The only exception is when upon the beginning of the execution of io_edit, when validating *offset, make sure to correct the offset before returning the default value of key.

when IsTextEditor is true, and Escape is hit do not abort the editing but simply terminate the function returning the Escape key.

Any normal printable key is simply placed into the string according to the rules laid out in the discussion of the INSERT key above. (The keys from the space character to the tilde character in the ASCII table are considered "printable".)

The io_edit() function always shows blanks in any the part of the field that is not occupied by the data in the string. UNDER NO CIRCUMSTANCES DOES THE FUNCTION CHANGE ANY POSITION ON THE SCREEN OUTSIDE OF THE FIELD.

Like most C library functions, your io_edit() may assume that it is the calling program's responsibility to ensure that the array is large enough to handle the specified number of characters, and that the starting screen position provides enough room (on the screen) for the field, etc.

Note:

If memory allocation for aborting the edit (ESCAPE KEY) fails, quit the function returning -1.

Selection Editor

void io_displayflag(..........)

void io_displayflag(const char *format, int row, int col, int status);

Allows the user to display a checkbox at row and col on the screen. Depending on the value of status; being zero or non-zero, the checkbox will be checked or unchecked respectively.

The checkbox will be always shown using 3 characters; two surrounding characters and one character in the middle as the checkmark. If the status argument is zero, then instead of the check-mark a space will be printed on the screen.

The 3 characters held in the “format” array; format[0] and format[2] are surrounding characters and format[1] is the check-mark.

The const char *format is used to specify the character used for the checkbox, so for example if the format argument is "[X]", then an unchecked checkbox will be

[ ]

and a checked checkbox will be

[X]

After the checkbox is displayed, the cursor is always place under the check-mark (in centre).

int io_flag(..........)

int io_flag(const char *format, int row, int col, int *status, int radio);

io_flag() allows the user to make a single true/false selection. "status" points to the status of the selection, that can be zero or non-zero. If "*status" is initially set to anything but zero, io_flag() corrects value to one. "format" holds the shape of the checkbox as io_displayflag() function.

io_flag() begins the selection by displaying the checkbox according to its “*status”. (Remember that the value of "*status" is corrected before the editing begins). Then the function waits for the user input.

• If the user input is any of the printable keys (' ' < key <= '~') excluding space, it should be ignored (no action taken). If the user input is any of the function keys, the function is terminated returning the key.
• If the user input is SPACE:
  • If “radio” is true, then the "*status" is set to one, checkbox is displayed and function is terminated returning space.
  • If “radio” is false, then the value of "*status" is toggled between 0 and 1, the checkbox is displayed and function is exited returning space.

void io_displayMenuItem(..........)

void io_displayMenuItem(const char *format, const char *menuItem, int row, int col, int len, int status);

Allows the user to display a menu-item at row and col on the screen with width of len. Depending on the value of status; being zero or non-zero, the menu-item will be surrounded by formatcharacters or space respectively.

The menuItem argument will be always shown surrounded by two characters.

• If status is zero, then at row and col a space will be shown, then the menuItem followed by another space. If the length of menuItem is less than (len-2), then enough spaces will be printed up to make the length (len-2).

"Hello"

with 10 as len will be printed as :

" Hello    "

• If status is non-zero, then at row and col format[0] will be shown then the menuItem and finally format[1].If the length of menuItem is less than (len-2), then enough spaces will be printed up to make the length (len-2).

"Hello"

with 10 as len and "[]" as format chars, will be printed as :

"[Hello   ]"

After the Menu item is displayed, the cursor is always placed under the first character of mentItem. (position row and col+1)

int io_menuItem(..........)

int io_menuItem(const char *format, const char *menuItem, int row, int col, int len, int *status);

io_menuItem() allows the user to make a single item selection. "*status" points to the status of the selection, that can be zero or non-zero. If "*status" is initially set to anything but zero, io_menuItem() corrects value to one. "*format" holds the shape of the selection indicator as io_displayMenuItem() function.

io_menuItem() begins the selection by displaying the menu item according to its “*status” using io_displayMenuItem(). (Remember that the value of "*status" is corrected before the editing begins). Then the function waits for the user input.

• If the user input is any of the printable keys (' ' < key <= '~') excluding space, it should be ignored (no action taken). If the user input is any of the function keys, the function is terminated returning the key.
• If the user input is SPACE, then the *status is set to one, menu item is displayed and function is terminated returning space.

Platforms

Windows Visual C++

To Download Visual studio from Seneca/ACS download page Seneca students should first login using their Seneca account, click on MSDN and scroll down to the DVD Downloads subheading. Download the file "(Dual Layer) Visual Studio 2008 Professional Edition, MSDN Library for Visual Studio 2008 ".

(Note that the image does not include Service Pack 1)

Users also have the option of downloading Microsoft Visual C++ 2008 Express Edition from the Microsoft Visual Studio Express Downloads page. Users will eventually need to register the product, free of charge, in order to continue usage beyond the trial period. To register, open Visual C++, select 'Help' from the top tool bar and select 'Register Product'. Follow the instructions displayed on the screen and a registation key will be issued following successful registration.
If you have other MS Visual Studio products (eg. Visual Basic) installed you may be asked to first uninstall them before installing the Visual C++ Express Edition.

Creating a Project for console application in Visual C++ 2008

• Press Ctrl+Shift+N or click on File/New/Project
• In Project types select Visual C++/Win32 and then in Templates select Win32 Console Application (Text Mode)
• In Name section Enter the desired name for the project
• In Location find/enter the directory in which you want the project created
• Un-check Create directory for solution
• Click on OK to set the Application Settings
  • Click on Application Setting
  • Check Empty Project and then click on Finish

You can now either add new files to the solution or add existing ones.

Windows Borland C++

Borland C++ Compiler 5.5 is a free version. You can download it from ACS. To install Borland C++ command line compiler on your computer first run the executable you downloaded to expand the compiler files into a directory.

Say the installation is done in X:\Borland\BCC55
Create a file called bcc32.cfg in X:\Borland\BCC55\Bin and add the following two lines to it:

-I"X:\Borland\Bcc55\include"
-L"X:\Borland\Bcc55\lib"

Create another file called ilink32.cfg in X:\Borland\BCC55\Bin and add the following line to it:

-L"X:\Borland\Bcc55\lib"

Then add X:\Borland\BCC55\Bin to the system path:
Vista:

• Right-click on Computer and select properties.
• Click on Advanced System Settings on the left panel and the System properties will open with Advanced tag already selected

XP:

• Right-click on My Computer and select properties and the System properties will open
• Click on Advanced tag

Common:

• Click on Environment Variables Button
• In System Variables scroll down to path
• Select path and click on edit button
• Add ;X:\Borland\Bcc55\bin to the end of the path value, click OK on all windows to close and you are done.

Compile your code as:

> bcc32 as1tester.c ciol.c

Happy Compiling!

Linux Gnu C

Many distro come with compiler pre-installed. If not, you can use the package manager tool (yum, apt-get, merger...) in your system to search for GCC, and install that package. Also, there are some useful tools that you may need, such as autoconf, make, ctag and etc.

Distro specified installation of compilers guilds:
Installing Compilers in Ubuntu

To compile using gcc issue the following command:

gcc as1tester.c ciol.c -lncurses

or

cc as1tester.c ciol.c -lncurses

Also make sure you use Putty for your telnet client and set the Temminal/keyboard / function keys to Xterm R6

Here are the key codes for linux if you use putty with above settings

Mac OS C++

Mac OS, being a Unix base operating system, supports curses library. So if you follow the case study in the book (the one written for AIX)it should work on Mac too.

I will leave this platform as an option. If you like to get some bonus marks, you can implement it. But not doing it will not cost you anything.

How to submit your assignment

Close to the due date of the assignment, I will release a tester program called "a1tester.c". This program uses your functions and does series of tests. Each test will use your functions to produce an output or perform an action. If all the output is produced or the action is performed as stated in the tester program, you can submit through email to be evaluated. To submit your program after you tested it and made sure it can be submitted, you have to do the following:

• Compile your program with as1tester.c on matrix and call the executable "as1"
• Copy as1 into root of your matrix account. (home directory)
• Give your root account execute access to public ($chmod 711 .)
• Give your assignment one executable "as1", read and execute access to public ($chmod 755 as1)
• Move the code to windows and test it on borland and VCC and make sure it works correctly
• Set the platform to BCC (windows + Borland C compiler)
• Compress ciol.h and ciol.c into ciol.zip (no other compression utilities accepted)
  • Select the two files by holding the control key and and clicking on them
  • Right click on ciol.c form the opened menu select Send to
  • In Send to menu select Compressed (zipped) folder
  • This will create ciol.zip in the same directory
• Attach ciol.zip to an email to me to: fardad.soleimanloo@senecac.on.ca only from your Seneca email
• Make sure the subject is set to OOP344AS1

as1tester.c V1.2

as1tester.c V1.2 is released

Version 1.1 (removed warnings)

Version 1.2 (corrected typo message in 9.3 from curpos supposed to be 6, to curpos supposed to be 5)

The program tests the functions written for assignment one and makes sure they are as bug free as possible.

The program may (very possibly) have bugs. If you find any, I'll appreciate if you blog about it and also send an email to me. (But if you find a bug, make sure it is a bug and not a problem with your assignment)

To make sure you can get help if you face unsolvable problems in your assignment, I am extending the assignment due date to Wed. Oct 14 23:59.

As usual I will be in the office on Tuesday, check my Schedule on my Seneca Website for office hours.

Late Submission Penalty

10% Per day (Saturday and Sunday) counted as one