Difference between revisions of "Highbank Fedora Installation Config"
Chris Tyler (talk | contribs) (→PXE configuration) |
Chris Tyler (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | == Assumptions == | ||
| + | |||
| + | # Highbank box is on a private LAN 192.168.1.0/24 | ||
| + | # F18 x86_64 host has two NICs - one to private LAN, one to Internet | ||
| + | |||
| + | == Packages Required == | ||
| + | |||
| + | * dhcp | ||
| + | * tftp-server | ||
| + | * httpd | ||
| + | |||
| + | == NAT configuration == | ||
| + | |||
== DHCP configuration == | == DHCP configuration == | ||
Revision as of 11:47, 3 August 2013
Contents
Assumptions
- Highbank box is on a private LAN 192.168.1.0/24
- F18 x86_64 host has two NICs - one to private LAN, one to Internet
Packages Required
- dhcp
- tftp-server
- httpd
NAT configuration
DHCP configuration
TFTP configuration
- Create
/var/lib/tftpboot/pxelinux/pxelinux.cfg - Create
/var/lib/tftpboot/f18-highbank - Place these files in
/var/lib/tftpboot/f18-highbank:- http://fedoraproject.org/w/uploads/c/cf/F18-highbank.ks
- http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Fedora/armhfp/os/images/pxeboot/initrd-highbank.img
- http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Fedora/armhfp/os/images/pxeboot/vmlinuz-highbank
- http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Fedora/armhfp/os/images/pxeboot/upgrade-highbank.img
- http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Fedora/armhfp/os/images/pxeboot/uImage-highbank
- http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Fedora/armhfp/os/images/pxeboot/uInitrd-highbank
- Change
disable = yestodisable = noin/etc/xinetd.d/tftp - Reload/restart xinetd (note: restart needed if there were previously no available services):
systemctl restart xinetd
PXE configuration
- Place PXE configuration in
/var/lib/tftpboot/pxelinux/pxelinux.cfg, named "01-mac" e.g., "01-fc-2f-40-48-06-a0" - repeat once for each node
PXE configuration file contents:
menu title F18 HighBank Boot Options
default Highbank-Install
prompt 1
timeout 100
label Highbank-Install
kernel f18-highbank/vmlinuz-highbank
initrd f18-highbank/initrd-highbank.img
append console=ttyAMA0 ip=eth0:dhcp ks=http://192.168.1.254/f18-highbank/F18-highbank.ks rd.shell
HTTP configuration
- Configure httpd to serve
/var/lib/tftpboot/f18-highbankas/f18-highbankby adding this text to/etc/httpd/conf.d/f18-highbank.cfg:
Alias /f18-highbank "/var/lib/tftpboot/f18-highbank" <Directory "/var/lib/tftpboot/f18-highbank"> Options Indexes AllowOverride None Order allow,deny Allow from 192.168.1.0/24 Deny from all </Directory>
