Changes

(List the sequence and provide sh script to automate this)You'll need to download some software onto your Windows machine these before running these performance teststesting:

* [http://www.driverskit.com/dll/msvcp71.dll/2371.html msvcp71.dll](NOTE: If you have Visual Studio 2003 installed, you've already got it.)**Microsoft® C Runtime Library, v. 7.10.3077.0**You need a copy of this file to run Python with all the libraries. **If you have Visual Studio 2003 installed, you've already got it.

==Configure the environment==#Make sure the [[Firefox_Performance_Testing_:_A_Python_framework_for_Windows_Documentation#Framework_Prerequisites | prerequisites, above, ]] are installed.(sh script will automate this part - but get user to check)#Make a directory for the framework:<pre>$mkdir C:\mozilla</pre>#Download entire framework [http://www.yorku.ca/abel/liz/mozilla/Win32PerfTesting_v4.zip Performance Testing Framework] (directories and all subdirectories) onto your local disk and put it in '''C:\mozilla'''(one of two options 1.put zip file herereports dir in the framework 2.check if it exists and prompt user if he/she wants it created)#Check/edit ==Configure the paths (paths.py)==(Lots of work in this area.. paths.py is unclear, should specify that it can be modified and that these are just defaults.. and the paths are misleading because people think that they are commands for dos) To setup the appropriate paths for the framework, open the '''paths.py''' filein '''C: \mozilla\testing\performance\win32\''' and configure the paths (CYGWIN, SYNC, BASE_PROFILE_DIR, REPORTS_DIR, INIT_URL, TS_URL, TP_URL):   ===CYGWIN===*Verify that the path is pointing to the desired cygwin directory<pre>CYGWIN= r'c:\cygwin\bin\bash.exe -c'</pre>**Path The path to cygwin bash to get output from dump() in Firefox*If you didn't specify a different root directory for the Cygwin to be installed, it is in '''C:\'''  ===SYNC===*Verify that the path is pointing to the desired cygwin directory<pre>SYNC = r'c:\cygwin\bin\sync'</pre>*Run Runs sync between Ts runs*If you didn't specify a different root directory for the Cygwin to be installed, it is in '''C:\'''  ===BASE_PROFILE_DIR===*Verify that BASE_PROFILE_DIR is pointing to the '''base_profile''' directory*Path to If you didn't alter the base profile directory used for structure, the '''base_profile''' path would be: C:\mozilla\testing\performance\win32\base_profile<pre>BASE_PROFILE_DIR = r'C:\mozilla\testing. \performance\win32\base_profile'</pre>*IMPORTANT: Check that there is content in the '''base_profile''' directory *(Optional) For the page load test to work, modify the '''hostperm.1''' file, set **Set to allow urls with scheme:file to open in new windows, and **Set the preference to open new windows in a tab should be off. *  ===REPORTS_DIR===**Path This is the path to the directory that the generated reports will go into<pre>REPORTS_DIR = r'C:\mozilla\testing\performance\win32\extension_perf_reports'</pre>*Create '''extension_perf_reports''' dir in '''C:\mozilla\testing\performance\win32\''' OR *Set '''REPORT_DIR''' path to a directory where you want the reports to go into. Make sure that directory is created.  ===INIT_URL===**Path The path to the file url to load when initializing a new profile<pre>INIT_URL = 'file:///c:/mozilla/testing/performance/win32/initialize.html'</pre>*Check that '''initialize.html''' is in '''C:\mozilla\testing\performance\win32\'''*'''Note: Don't change the local file url to a file path'''  ===TS_URL===**The path to the file url to load for startup test (Ts)<pre>TS_URL = 'file:///c:/mozilla/testing/performance/win32/startup_test/startup_test.html?begin='</pre>*Check that '''startup_test.html''' is in '''C:\mozilla\testing\performance\win32\startup_test''' *'''Note: Don't change the local file url to a file path'''  ===TP_URL === **The path to the file url to load for page load test (Tp) #Create <pre>TP_URL = 'file:///c:/mozilla/testing/performance/win32/page_load_test/cycler.html'</pre>*Check that '''cycler.html''' is in '''C:\mozilla\testing\performance\win32\page_load_test'''*'''Note: Don't change the local file url to a file path''' =Config file=  ==Config info==(refer to Exended Progress Chart for yaml details - a few things have to be highlighted and clarified) In '''C:\mozilla\testing\performance\win32\''', create a YAML config file (config.yaml) with info about the profiles you want to test. Copy , paste and paste '''modify''' the following into in config.yamlor refer to [[sample.config]]:

filename: slowmachineyourfilename

==Instructions==1. Verify that the '''firefox''' path is pointing to the right Firefox instance on your system.* You will hit a zero division error and some other errors if you don't point it to the right path 2. '''preferences''':* If you don't have '''preferences''', change to: <pre>preferences : {}</pre> (make sure there is a space between ":" and "{" or else it will cause a syntax error)* If you do have '''preferences''', refer to [[sample.config]] 3. '''extensions''':* If you don't have '''extensions''' to install, change to: <pre>extensions: {}</pre> (make sure there is a space between ":" and "{" or else it will cause a syntax error)* If you do have '''extensions''' to install, refer to this sample:<pre> extensions: # Make sure that the path is directed to the desired location of the extension # Need quotes around guid because of curly braces "{12345678-1234-1234-1234-abcd12345678}" : c:\path\to\unzipped\xpi foo@sample.com : c:\path\to\other\unzipped\xpi </pre>* Make sure that the path to the extension is right 4. Change '''filename''' and '''title''' to whatever you desire 5. Run In '''cmd''', run '''run_tests.py''' with the name of your config file as an argumentin '''c:\mozilla\testing\performance\win32\''': <pre>$run_tests.py config.yaml</pre> * Running the test will close any existing Firefox windows. (this part has to be highlighted)**You might run into this message on your browser: '''This page should close Firefox. If it does not, please make sure that the dom.allow_scripts_to_close_windows preference is set to true in about:config''' **Type '''auto:config''' in the address bar and double click on '''dom.allow_scripts_to_close_windows''' to change it to true* If you see '''processing... Performance Testing is starting''', performance testing is running.. wait.. * After the performance testing is done, your reports will be placed in the [[Firefox_Performance_Testing_:_A_Python_framework_for_Windows_Documentation#REPORTS_DIR | '''REPORTS_DIR''']] directory you specified in '''paths.py''' * You can use a space-separated list of config files, to generate a report of startup and page load times.  =Directory Structure of Framework=  ==Overview of Structure==A glance at the Framework File Structure (CVS files not included): <pre> win32 | | |__ base_profile (dir) | | | |__ bookmarkbackups (dir) | | | | | |__ .html files | | | |__ Cache (dir) | | | |__ .bak, .html, .ini, .dat, .txt, .js, .rdf, .mfl files | | |__ page_load_test(dir) | | | |__ base(dir) | | | | | |__ other dirs and .html files | | | |__ cycler.html & report.html | | |__ startup_test | | | |__ startup_test.html | | |__ extension_perf_reports (dir for generated reports) | | |__ run_tests.py, paths.py, config.yaml and other .py, .html files </pre> *NOTE: Content in '''base_profile''' dir may vary  The report will following is written by Annie Sullivan (annie.sullivan@gmail.com): ==base_profile/==*This directory contains the base profile used for testing. *A copy of this profile is made for each testing profile, and extensions or prefs are added according to the test_configs array in run_tests.py. *For the page load test to run correctly, the hostperm.1 file must be placed set to allow scheme:file uris to open in new windows, and the pref to force a window to open in a tab must not be set. *The dom.allow_scripts_to_close_windows pref should also be set to true. The browser.shell.checkDefaultBrowser pref should be set to false.  ==page_load_test/==*This directory contains the JavaScript files and html data files for the page load test. *The page load test opens a new window and cycles through loading each html file, timing each load.  ==startup_test/==*This directory contains the JavaScript to run the startup test. *It measures how long it takes Firefox to start up.  ==extension_perf_report/==*This directory is where the REPORTS_DIR generated report will go into. *You may specify another directory to substitute this directory you specified in , but make sure that the '''paths.py''' is changed to point to it. 

DIRECTORY STRUCTURE: page_load_test/ This directory contains the JavaScript files and html data files for the page load test. The page load test opens a new window and cycles through loading each html file, timing each load. startup_test/ This directory contains the JavaScript to run the startup test. It measures how long it takes Firefox to start up. base_profile/ This directory contains the base profile used for testing. A copy of this profile is made for each testing profile, and extensions or prefs are added according to the test_configs array in run_tests.py. For the page load test to run correctly, the hostperm.1 file must be set to allow scheme:file uris to open in new windows, and the pref to force a window to open in a tab must not be set. The dom.allow_scripts_to_close_windows pref should also be set to true. The browser.shell.checkDefaultBrowser pref should be set to false. ==run_tests.py, paths.py== *These files should be configured to run the test on different machines, with different extensions or preferences. See setup above.