Difference between revisions of "SYA810 RAID Benchmarking Lab"
Chris Tyler (talk | contribs) m (→Important Notes) |
Bossa nesta (talk | contribs) (→Who's Doing Which RAID Level) |
||
| Line 45: | Line 45: | ||
|- | |- | ||
|6 | |6 | ||
| − | | | + | |Nestor [http://matrix.senecac.on.ca/~tnchan/PerformanceTest/ Scripts] |
|- | |- | ||
Revision as of 17:33, 4 February 2009
Task
The machine 'scotland' is equipped with six 1.5TB disk drives. Partition 9 on each drive is unused. We're going to use these partitions to benchmark various RAID levels.
- Create a RAID array of the six partitions (/dev/sd[a-f]9) using the appropriate mdadm command(s).
- Create an ext3 filesystem on that array.
- Benchmark the array using the Winter_2009_SYA810_Block_Device_Benchmark_Scripts. Repeat the benchmarks at least 3 times -- more if the results seem to vary substantially.
- Stop the RAID array.
Important Notes
- Do not use any devices other than /dev/sd[a-f]9 as members of the array.
- Do not have any spare elements in your array.
- Make sure the system is quiet (not doing any background processing) when you run your tests.
Who's Doing Which RAID Level
Write you name on here according to RAID levels chosen in class.
| RAID Level | Person |
|---|---|
| Append | |
| 0 | |
| 1 | |
| 4 | |
| 5 | |
| 6 | Nestor Scripts |
| 1+0 | |
| RAID 5+LVM |
Scheduling
| Person | Date/time (YYYY-MM-DD HH:MM-HH:MM) | Tests |
|---|---|---|
| Chris Tyler | 2009-02-02 08:00-17:00 | Multiseat testing |
| Chris Tyler | 2009-02-04 08:00-17:00 | Multiseat testing |
Results
Record your results here. A table would be nice!
