View source for X-Gene Information

[[Category:Enterprise Hyperscale Lab]]
Basic information about the X-Gene Servers

== Boot Software ==

The systems ship with uBoot in SPI flash with console on serial /dev/ttyS0 at 115200/8/n/1

== Default Linux Installation (Factory Image) ==

User/pass: root/root

User/pass: default/NULL

~800MB

IP Address is preset to 10.x.x.x

== Ethernet port assignments ==

With the default Linux installation:
* eth0: 1GBE upper-right corner (above USB ports)
* eth1: 1GBE lower-left corner
* eth2: 1GBE upper-left corner
* eth3: 10GBE sfp+

All four ports have been confirmed to work. <code>iperf</code> reports 9.41 Gb/s on the 10GBE port when directly connected to another X-Gene.

== IP Information ==

These machines are currently connected to Iraq, with static IPs on the eth0 mac addresses.

Iraq has the corresponding hostnames ''red'', ''blue'', and ''green'' assigned in /etc/hosts (these names match the original ethernet cable colours, though red is not used within the [[EHL]] because it is reserved for serial connections).

The serial console port of each system is connected to the [[Cyclades Terminal Server]].