View source for How to Setup and configure Nagios

::::::::: <u>'''Version 0.4'''</u>


== 1.0 About Nagios ==


[[File:nagios_logo.png]]
'''Nagios''' is a system and network monitoring application. It watches hosts and services that you specify, and provides critical notifications to administrators, when the system/network performance is being negatively impacted.

Nagios was originally designed to run under Linux, but it possessess the capability of being compatible with a host of other OSs as well.

Some of the many features of Nagios include: 

*          Monitoring of network services (SMTP, POP3, HTTP, NNTP, PING, etc.)

*          Monitoring of host resources (processor load, disk usage, etc.)

*          Simple plug-in design that allows users to easily develop their own service checks

*          Parallelized service checks

*          Ability to define network host hierarchy using "parent" hosts, allowing detection of and distinction between hosts that are down and those that are unreachable

*          Contact notifications when service or host problems occur and get resolved (via email, pager, or user-defined method)

*          Ability to define event handlers to be run during service or host events for proactive problem resolution

*          Automatic log file rotation

*          Support for implementing redundant monitoring hosts

*          Optional web interface for viewing current network status, notification and problem history, log file, etc.

== 2.0 Server Installation ==


This guide will provide you with instructions on how to install Nagios from source (code) on Fedora 13 and have it monitoring your local and client machines.

'''2.1 Features available after instalation'''

* Nagios and the all plugins will be installed underneath /usr/local/nagios

* Nagios will be configured to monitor a few aspects of your local system (CPU load, disk usage, etc.)

* The Nagios web interface will be accessible at http://localhost/nagios/

* Monitor Nagios clients


'''2.2 Prerequisites'''

During portions of the installation you will need to have root access to your machine.

<pre>
Note: root password is **********
</pre>

Make sure you've installed the following packages on your Fedora 13 installation before continuing.
* Apache
* PHP
* GCC compiler
* GD development libraries

<pre>
Note: you have to be root to install the following packages.
</pre>

<code>yum install httpd php</code>
  
<code>yum install gcc glibc glibc-common</code>  

<code>yum install gd gd-devel</code>


'''2.3 Create Account Information'''

1. While you still have root privilages from a previous step, create a new nagios user account and give it a password.

<code>useradd -m nagios</code>
  
<code>passwd **********</code>

2. Create a new nagcmd group for allowing external commands to be submitted through the web interface. Add both the nagios user and the apache user to the group.

<code>groupadd nagcmd</code>  

<code>usermod -a -G nagcmd nagios</code>  

<code>usermod -a -G nagcmd apache</code>


'''2.4 Download Nagios and the Plugins'''

1. Create a directory for storing the downloads.

<code>mkdir ~/nagios/downloads</code>

<code>cd ~/nagios/downloads</code>  

Download the source code tarballs of both Nagios and the Nagios plugins (visit http://www.nagios.org/download/ for links to the latest versions). 

<code>wget http://prdownloads.sourceforge.net/sourceforge/nagios/nagios-3.2.3.tar.gz </code> 

<code>wget http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.15.tar.gz  </code>


'''2.5 Compile and Install Nagios'''

1. Extract the Nagios source code tarball.

<code>cd ~/nagios/downloads</code>

<code>tar xzf nagios-3.2.3.tar.gz</code>  

<code>cd nagios-3.2.3 </code> 

2. Run the Nagios configure script, passing the name of the group you created earlier,  using the following command:

<code>./configure --with-command-group=nagcmd  </code>

3. Compile the Nagios source code.

<code>make all</code>

4. Install binaries, init script, sample config files and set permissions on the external command directory.

<pre>Note: you have to be root to issue the following commands.</pre>

<code>make install </code>

<code>make install-init </code> 

<code>make install-config  </code>

<code>make install-commandmode</code>

<pre>Note: DO NOT start Nagios yet</pre>


'''2.6 Customize Configuration'''

Edit the /usr/local/nagios/etc/objects/contacts.cfg config file with your favorite editor and change the email address associated with the nagiosadmin contact definition to the address you'd like to use for receiving alerts.

<code>vi /usr/local/nagios/etc/objects/contacts.cfg </code>

<pre>Note: this will be changed to Chris Tyler’s email.</pre>


'''2.7 Configure the Web Interface'''

1. Install the Nagios web config file in the Apache conf.d directory.

<code>cd /home/nagios/downloads/nagios-3.2.3</code>

<pre>Note: you have to be root to issue the following command. </pre>

<code>make install-webconf</code>  

2. Create a nagiosadmin account for logging into the Nagios web interface.

<code>htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin  </code>

Type the password: **********

3. Restart Apache to make the new settings take effect.
<code>service httpd restart</code>


'''2.8 Compile and Install the Nagios Plugins'''

1. Extract the Nagios plugins source code tarball.

<code>cd ~/downloads</code> 

<code>tar xzf nagios-plugins-1.4.15.tar.gz  </code>

<code>cd nagios-plugins-1.4.15  </code>

2. Compile and install the plugins.

<code>./configure --with-nagios-user=nagios --with-nagios-group=nagios  </code>

<code>make</code>
  
<pre>Note: you have to be root to issue make install command.</pre>

<code>make install</code>


'''2.9 Start Nagios'''

1. Add Nagios to the list of system services and have it automatically start when the system boots.

<code>chkconfig --add nagios  </code>

<code>chkconfig nagios on  </code>

2. Verify the sample Nagios configuration files.

<code>/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg </code>
 
<pre>You have to have no warnings or errors:

Total Warnings: 0
Total Errors: 0</pre>

3. If there are no errors, start Nagios. If you got errors, please check nagios.cfg file in step 2, and try it again.
<code>service nagios start  </code>


'''2.10 Modify SELinux Settings'''

Fedora ships with SELinux (Security Enhanced Linux) installed and in Enforcing mode by default. This can result in "Internal Server Error" messages when you attempt to access the Nagios CGIs.

1. See if SELinux is in Enforcing mode.

<code>getenforce </code>

2. Put SELinux into Permissive mode.

<code>setenforce 0  </code>

3. To make this change permanent, you'll have to modify the settings in /etc/selinux/config and reboot.
Instead of disabling SELinux or setting it to permissive mode, you can use the following command to run the CGIs under SELinux enforcing/targeted mode:

<code>chcon -R -t httpd_sys_content_t /usr/local/nagios/sbin/  </code>

<code>chcon -R -t httpd_sys_content_t /usr/local/nagios/share/  </code>


'''2.11 Login to the Web Interface'''

You should now be able to access the Nagios web interface at the URL below. You'll be prompted for the username (nagiosadmin) and password you specified earlier. For a password that you configured please refere to the section 2.7, step 2.
 
<code>http://localhost/nagios/  </code>

Click on the "Service Detail" navigational bar link to see details of what's being monitored on your local machine. It will take a few minutes for Nagios to check all the services associated with your machine, as the checks are spread out over time.


'''2.12 Open Port 5666 on Firewall'''

Make sure your machine's firewall rules are configured to allow access to the web server if you want to access the Nagios interface remotely.

1. Create a rule for iptables.

<code>iptables -I INPUT -p tcp -m tcp ---dport 5666 -j ACCEPT </code>

2. Save the new iptables rule so it will survive machine reboots.

<code>service iptables save</code>


'''2.13 You're Done'''

Congratulations! You sucessfully installed Nagios. Your journey into monitoring is just beginning. You have just completed the basic configuration of the Nagios Server. You'll no doubt want to monitor more than just your local machine, so keep reading and you will find how to configure the client machine with some modifications on Nagios server.
If you did everything as per specifications, the following page will be displayed upon initial access of the Nagios Server GUI:


[[File:Nagios.jpg|400px|thumb|centre|Nagios]]

== 3.0 Additional Server configuration ==

'''3.1 Downlad and Install NRPE Plugin for Nagios Server'''

1. Create a Nagios_NRPE folder.


<code>mkdir -p ~/Nagios/Nagios_NRPE</code>

<code>cd ~/Nagios/Nagios_NRPE</code>

2. Save file to directory ~/Nagios

http://www.nagios.org/download/download.php

3. Extract the Files:

<code>tar -xzf nrpe-2.12.tar.gz</code>

<code>cd nrpe-2.12</code>

'''3.2 Compile and Configure NRPE'''

<pre>Note: you have to be root to issue make install command.</pre>

<code>./configure</code>

<code>make all</code>

<code>make install-plugin</code>

'''3.3 Test Connection to NRPE daemon on Remote Server'''

Make sure that the NRPE on your Nagios server can talk to the NRPE daemon on the remote server we want to monitor. Replace “<IP of Remote Server>” with the remote servers IP address.

<code>/usr/local/nagios/libexec/check_nrpe -H 142.204.133.90 NRPE v2.12</code>

'''3.4 Create NRPE Command Definition'''

<pre>
Note: The command.cfg file does not exist in /usr/local/nagios/etc/ directory so 
it has to be created, and the script block has to be added to the aformentioned file.
</pre>

1. A command definition needs to be created in order for the check_nrpe plugin to be used by nagios.

<code>vi /usr/local/nagios/etc/objects/commands.cfg</code>

2. Add the following at the end of the file:

<pre>define command{         

command_name check_nrpe         

command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$

         }
</pre>

'''3.5 Create host and service definitions'''

You'll need to create some object definitions in order to monitor the remote Linux/Unix machine. These definitions can be placed in their own file or added to an already exiting object configuration file.

First, create a new template for each different type of host you'll be monitoring. Let's create a new template for Linux boxes.

1. Create new linux-box-remote object template file:

<code>vi /usr/local/nagios/etc/objects/linux-box-remote.cfg</code>


<pre>Note: Information below is just an example of the template file.</pre>

<pre>
define host{
          name                  linux-box-remote      ; Name of this template
          use                   generic-host          ; Inherit default values
          check_period          24x7
          check_interval        5
          retry_interval        1
          max_check_attempts    10
          check_command         check-host-alive
          notification_period   24x7
          notification_interval 30
          notification_options  d,r
          contact_groups        admins
          register              0      ; DONT REGISTER THIS - ITS A TEMPLATE
          }

define host{
          use       linux-box-remote     ; Inherit default values from a template
          host_name Centos5    ; The name we're giving to this server
          alias     Centos5 ; A longer name for the server
          address   142.204.133.90   ; IP address of the server
          }

define service{
          use                 generic-service
          host_name           Centos5
          service_description CPU Load
          check_command       check_nrpe!check_load
          }
define service{
          use                 generic-service
          host_name           Centos5
          service_description Current Users
          check_command       check_nrpe!check_users
          }
define service{
          use                 generic-service
          host_name           Centos5
          service_description /dev/hda1 Free Space
          check_command       check_nrpe!check_hda1
          }
define service{
          use                 generic-service
          host_name           Centos5
          service_description Total Processes
          check_command       check_nrpe!check_total_procs
          }
define service{
          use                 generic-service
          host_name           Centos5
          service_description Zombie Processes
          check_command       check_nrpe!check_zombie_procs
          }
</pre>

2. Activate the linux-box-remote.cfg template:

<code>vi /usr/local/nagios/etc/nagios.cfg</code>

And add the following lines:

<code># Definitions for monitoring remote Linux machine </code>

<code>cfg_file=/usr/local/nagios/etc/objects/linux-box-remote.cfg </code>

3. Verify Nagios Configuration Files:

If there are errors, fix them. If everything is fine, restart Nagios.

<code>/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg </code>

You have to have no warnings or errors:

<pre>
Total Warnings: 0

Total Errors: 0
</pre>

4. Restart Nagios:

<code>service nagios restart</code>

== 4.0 IRC Notification Bot Configuration (Server configuration) ==

<pre>Note: please keep in mind this was done on Fedora 13 with Nagios 3.2.3 and NagIRCBot 0.0.30.</pre>

1. Become the root user. 

<code>su – </code>

2. Install edition packages.

<code>yum install openssl-devel </code>

<code>yum nstall gcc </code>

3. After unpacking the tarball, in the make file you must change the following line:

from: 

<code>LDFLAGS+=$(DEBUG) -lssl -lstdc++ </code>

to: 

<code>LDFLAGS+=$(DEBUG) -lssl -lstdc++ -lcrypto </code>

4. When you change the make file from the step 3, issue make/make install.

<code>make</code>

<code>make install</code>

5. Once its installed you can start up nagircbot:

<code>nagircbot -f /var/log/nagios/status.dat -s irc.freenode.net:6667 -c \#mathon -C -n test22283833 -u ident -U realname -I 900 </code>

6. Lets examine the command from step 5, which will be the main command for starting nagircbot:


{|border="1" cellpadding="1" cellspacing="0" align="left"
|-
|<code>/var/log/nagios/status.dat</code> || Points to the log file it will read
|-
|<code>irc.freenode.net:6667</code> || IRC server
|-
|<code>mathon</code> || Channel name
|-
|<code>The "-C" flag</code> || Allows it to send colored messages
|-
|<code>test22283833</code> || IRCnickname
|-
|<code>ident/realname</code> || The ident and real name string for the bot
|-
|<code>The "-I" flag 900</code> || How often to send a message to the channel in this case its 15min (900 seconds)
|-
|}














7. Additional information about Nagios Bot.

Nagios bot options can be queried on the IRC channel. If you open private messages with the bot you can issue and control it by using the following commands:


{|border="1" cellpadding="1" cellspacing="0" align="left"
|-
|<code>help</code> || gets help
|-
|<code>resend</code> || resend the last known problems
|-
|<code>statistics</code> || returns the number of criticals/warnings/etc
|-
|<code>reload</code> || completely forced reload the nagios status
|-
|<code>check</code> || check if nagios is still running
|-
|}










8.Congratulations! You just completed the IRC bot configuration.

[[File:IrcBot.png|400px|thumb|centre|Nagios IRC Bot]]

== 5.0 Client Installation ==


'''5.1 Create Account Information on Client Machine'''

SSH to Iraq machine (142.204.133.98) and issue the following commands:

1. Become the root user. 

<code>su - </code>

2. Create a new nagios user account and give it a password.

<code>useradd -m nagios</code>  

<code>passwd senecaCdot  </code>

3. Create a folder for Nagios plugins.  

<code>mkdir ~/downloads</code>

<code>cd ~/downloads</code>

<pre>Note: For the next step make sure you are connected to the Internet to download nagios plugins.</pre>

3. Download the source code tarball of the NRPE addon (visit http://www.nagios.org/download/ for links to the latest versions).

<code>wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz</code>

4. Extract the NRPE source code tarball.

<code>tar xzf nrpe-2.8.tar.gz </code>

<code>cd nrpe-2.8</code>

5. Compile the NRPE add-on.

<code>./configure </code>

<code>make all</code>

6. Install the NRPE plug-in.

<code>make install-plugin</code>

'''5.2 Compile and Configure Nagios Plugins'''

<pre>
Note: You need openssl-devel package installed to compile plugins with ssl support.

You have to be root to issue make install commands.
</pre>

1. Become root user.

<code>su -</code>

2. Install openssl-devel package.

<code>yum -y install openssl-devel</code>

 
2. Instal Plugins:

<code>./configure --with-nagios-user=nagios --with-nagios-group=nagios</code>

<code>make</code>

<code>make install</code>

3. The permissions on the plugin directory and the plugins will need to be changed to nagios user.

<code>chown nagios.nagios /usr/local/nagios</code>

<code>chown -R nagios.nagios /usr/local/nagios/libexec</code>

4. Package xinted is needed.

<code>yum install xinetd</code>

5. Start xinetd service.

<code>service xinetd start</code>
 
'''5.3 Downlad and Install NRPE Daemon'''

1. Create a forlder ~/Nagios/Nagios_NRPE.

<code>mkdir -p ~/Nagios/Nagios_NRPE</code>

<code>cd ~/Nagios/Nagios_NRPE</code>

Save file to directory ~/Nagios

http://www.nagios.org/download/download.php

2. Extract the files:

<code>tar -xzf nrpe-2.12.tar.gz</code>

<code>cd nrpe-2.12</code>

'''5.4 Compile and Configure NRPE'''

1. Install NRPE:

<pre>Note: you have to be root to issue make install command.</pre>

<code>./configure</code>

<pre>
General Options:  
----------------------  
NRPE port:      5666  
NRPE user:      nagios  
NRPE group:     nagios  
Nagios user:    nagios  
Nagios group:   nagios  
</pre>

<code>make all  </code>

<code>make install-plugin  </code>

<code>make install-daemon  </code>

<code>make install-daemon-config </code> 

<code>make install-xinetd</code>

'''5.5 Post NRPE Configuration'''

1. Edit Xinetd NRPE entry:

Add Nagios Monitoring server to the “only_from” directive.

<code>vi /etc/xinetd.d/nrpe only_from = 127.0.0.1 <142.204.133.90 > </code>

2. Edit services file entry and add entry for nrpe daemon.

<code>vi /etc/services</code>

<pre>nrpe      5666/tcp    # NRPE</pre>

3. Restart Xinetd and set to start at boot:

<code>chkconfig xinetd on  </code>

<code>service xinetd restart</code>

'''5.6 Test NRPE Daemon Install'''

1. Check NRPE daemon is running and listening on port 5666:

<code>netstat -at |grep nrpe</code>

2. Output should be:

<pre>tcp    0    0 *:nrpe    *.*    LISTEN</pre>

3. Check NRPE daemon is functioning:

<code>/usr/local/nagios/libexec/check_nrpe -H localhost</code>

4. Output should be NRPE version:

<pre>NRPE v2.12</pre>

'''5.7 Open Port 5666 on Firewall'''

<pre>Note: Make sure to open port 5666 on the firewall of the remote server so that the Nagios monitoring server can access the NRPE daemon.
</pre>

1. Create a rule for iptables.

<code>iptables -I INPUT -p tcp -m tcp ---dport 5666 -j ACCEPT</code>

2. Save the new iptables rule so it will survive machine reboots.

<code>service iptables save</code>

'''5.8 Congratulations'''

Congratulations! You have successfully completed the configuration of the Nagios Server/Client setup.

== 6.0 Demonstration ==

[[File:Network map.jpg|400px|thumb|left|Network map]]

[[File:Host_Status_Details.jpg|400px|thumb|left|Host Status Details]]

[[File:System Status Details.jpg|400px|thumb|left|System Status Details]]

[[File:Services Detail Pane.jpg|400px|thumb|left|Services Detail Pane]]