View source for OPS535-vl-lab-nfs

'''DO NOT USE - Work in Progress'''
<font color='red'>DO NOT USE - Work in Progress</font>
[[Category: OPS535]][[Category: OPS535-Labs]][[Category: rchan]]
=OPS535 Lab 2 (using Virutal Lab)=
== Objectives ==
* Setup and configure private network for your assigned VMs in the OPS535 Virtual Lab for this lab, future labs, and assignments
* Configure VM1 as your control workstation for performing remote administration tasks on VM[2-4]
* Create and deploy remote administration scripts using bash/ansible

==Pre-Requisites==
:*Has access to Seneca VPN, and matrix.senecacollege.ca
:*Complete the collection of baseline information on your assigned VMs (VM1, VM2, VM3, and VM4)
:*Complete the [[OPS535-lab-nfs | Lab 2 - NFS lab]] on your home VMs

==Investigation 1: VMs Configuration==
=== Background ===
You have ssh access to your assigned VMs from matrix.senecacollege.ca using the port numbers, user name, and the corresponding password given on Blackboard via the router ops535.myvmlab.senecacollege.ca. The access router will map the ports (9xxy) to the corresponding internal IP addresses (172.20.xx.y) of your VMs, where 'xx' is you assigned network number, and 'y' is the VM number. The following are the port mapping and the network interfaces on each VM for the student with network number '14':

{| class="wikitable" | style="margin-left:50px; style="border: 2px solid black;" | "
|- style="font-weight:bold; text-align:center;"
| style="border: 2px solid black;" |  VM
| style="border: 2px solid black;" |  Port
| style='border: 2px solid black;  |  ens192 ip
| style='border: 2px solid black;  |  ens224 ip
| style='border: 2px solid black;  |  ens256 ip
| style='border: 2px solid black;  |  hostname
|-
| style="background-color:#ffff00; border: 2px solid black;" |  VM y
| style="background-color:#ffff00; border: 2px solid black;" |  9xxy
| style='background-color:#ffff00; border: 2px solid black;" |  172.20.xx.y
| style='background-color:#ffff00; border: 2px solid black;" |  192.168.xx.y
| style='background-color:#ffff00; border: 2px solid black;" |  ----
| style='background-color:#ffff00; border: 2px solid black;" |  ----
|-
| style="background-color:#66cccc; border: 2px solid black;" |  VM 1
| style="background-color:#66cccc; border: 2px solid black;" |  9141
| style='background-color:#66cccc; border: 2px solid black;" |  172.20.14.1
| style='background-color:#66cccc; border: 2px solid black;" |  192.168.14.1
| style='background-color:#66cccc; border: 2px solid black;" |  do-not-use
| style='background-color:#66cccc; border: 2px solid black;" |  router
|-
| style="background-color:#cccc66; border: 2px solid black;" |  VM 2
| style="background-color:#cccc66; border: 2px solid black;" |  9142
| style='background-color:#cccc66; border: 2px solid black;" |  172.20.14.2
| style='background-color:#cccc66; border: 2px solid black;" |  192.168.14.2
| style='background-color:#cccc66; border: 2px solid black;" |  none
| style='background-color:#cccc66; border: 2px solid black;" |  pri-dns
|-
| style="background-color:#66cccc; border: 2px solid black;" |  VM 3
| style="background-color:#66cccc; border: 2px solid black;" |  9143
| style='background-color:#66cccc; border: 2px solid black;" |  172.20.14.3
| style='background-color:#66cccc; border: 2px solid black;" |  192.168.14.3
| style='background-color:#66cccc; border: 2px solid black;" |  none
| style='background-color:#66cccc; border: 2px solid black;" |  co-nfs
|-
| style="background-color:#cccc66; border: 2px solid black;" |  VM 4
| style="background-color:#cccc66; border: 2px solid black;" |  9144
| style='background-color:#cccc66; border: 2px solid black;" |  172.20.14.4
| style='background-color:#cccc66; border: 2px solid black;" |  192.168.14.4
| style='background-color:#cccc66; border: 2px solid black;" |  none
| style='background-color:#cccc66; border: 2px solid black;" |  rns-ldap
|}

=== Task 1 : setup and configure VM1 ===
* ssh to your VM1 from matrix
<pre>
ssh -p 9141 student@ops535.myvmlab.senecacollege.ca
</pre>
* confirm the IP address on the network dev 'ens192'.
* run the 'nmtui' command under sudo and configure '''ens224''' with the appropriate IP address (192.168.xx.1) as shown.
* install the 'epel-release' package
* install the 'ansible' package
* install the 'git' package
* install the 'wget' package

=== Task 2: setup and configure VM2 - VM4 ===
* you can either ssh to your VM2 - VM4 from matrix or from your VM1.
:* ssh to your VM2 - VM4 from matrix, replace [2-4] with 2, 3, or 4:
<pre>
ssh -p 914[2-4] student@ops435.myvmlab.senecacollege.ca
</pre>
:* ssh to your VM2 - VM4 from your VM1
<pre>
ssh 172.20.14.[2-4]
</pre>

==Investigation 2: Control Workstation Configuration==
Perform the following steps on VM1 as root:

==Investigation 3: Scripts for remote administrations==
=== Task 1 ===
Using bash scripts
=== Task 2 ===
Using Ansible Playbooks


==Completing the Lab==


Follow the instructions on blackboard to submit the lab.

==Exploration Questions==