View source for Endian

[[Category:Computer Architecture]]
The ''Endian''-ism of a processor refers to the order in which multi-byte values are stored in memory.

== Little-Endian ==

Little-endian systems store the least-significant byte of a multi-byte value at the lowest address.

For example, on 6502 systems (with a 8 bit/1 byte word size), the 16-bit value $FFEE stored at address $1000 would be stored like this:

 $1000 $EE
 $1001 $FF

Likewise, on an x86_64 system, the 64-bit value 0xFFEEDDCCBBAA9988 would be stored at memory location 0x1000 like this:

 0x1000 0x88
 0x1001 0x99
 0x1002 0xAA
 0x1003 0xBB
 0x1004 0xCC
 0x1005 0xDD
 0x1006 0xEE
 0x1007 0xFF

== Big-Endian ==

Big-endian systems store multi-byte values with the most significant byte at the lowest address.

For example, on a Motorola 68030 CPU, the value 0xFFEEDDCC would be written at memory location 0x1000 as:

 0x1000 0xFF
 0x1001 0xEE
 0x1002 0xDD
 0x1003 0xCC

== Bi-endian ==

Bi-endian CPUs can store data in either format (though sometimes not instructions). ARM [[AArch32]] and [[AArch64]] systems, PowerPC, Alpha, recent SPARC, MIPS, and Itanium systems are bi-endian.

== Other Memory Sequences ==

There are a few, rare architectures which store values in a sequence other than strict little-endian or big-endian format. For example, the 32-bit value FFEEDDCCh would be stored by a PDP-11 at address 1000h in this manner:

 1000h EEh
 1001h FFh
 1002h CCh
 1003h DDh

That is, each 16-bit word is stored in little-endian format, but the two 16-bit words are in big-endian sequence.

== Significance of Byte Order ==

Byte order can introduce ambiguity and complexity when transferring binary data between dissimilar systems; in network protocols and file specifications, it is critical to specify the order of multi-byte values. Some platform-independent remote procedure call (RPC) systems provide functions to ensure that data is always represented "on the wire" in a particular byte order.

Byte order can be significant for performance in some contexts. The 6502 processor, for example, loads the byte following an [[OpCode|opcode]] in memory while the opcode is being decoded. Due to little-endian encoding, this byte can be safely assumed to represent bit positions 0-7 regardless of whether the opcode's argument is 1 byte or 2 bytes; if big-endian encoding was used, the first byte read after the opcode might have to be shifted to bit positions 8-15 in the case of a 2-byte argument.

Binary fields in internet protocol (IP) packets are in big-endian order. For this reason, the processors on many routers and other high-speed network devices are big-endian (e.g., MIPS) or run in big-endian order (ARM).

== Origin of the Terms ==

The terms ''Big-Endian'' and ''Little-Endian'' originally appeared in the classic satirical tale [https://www.gutenberg.org/files/829/829-h/829-h.htm Gulliver's Travels] by Jonathan Swift, where they referred to which end of a boiled egg was to be opened first -- a distinction which led to ongoing conflict between small-minded people.